{"title":"Audi R8","description":"\u003cp\u003eBrowse Audi R8 parts and accessories. Model grouping is for browsing; check the individual product's year, chassis, trim and variant before ordering.\u003c\/p\u003e","products":[{"product_id":"audi-r8-v10-gen-2-carbon-fiber-side-door-splitter-fins-4s-coupe-2016-2018","title":"Audi R8 V10 Gen 2 Carbon Fiber Side Door Splitter Fins – 4S Coupe (2016–2018)","description":"\u003cdiv\u003e\n\n\u003cp\u003eThe Gen 2 R8 is already sculpted like a supercar — but the right carbon details elevate it to another level. These Carbon Fiber Side Door Splitter Fins are designed for the Audi R8 V10 (4S), adding sharper definition and a more aggressive lower profile to the side blades and door area.\u003c\/p\u003e\n\n\u003cp\u003ePrecision 3D-designed and molded for accurate fitment, these side splitters integrate seamlessly with the factory body lines. The added lower extension enhances visual width and creates a more track-inspired stance without overwhelming the car’s original design.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from lightweight carbon fiber and finished in a high-gloss UV-protected clear coat, the exposed weave delivers exotic-level detail and long-term durability. Whether you're building a street-spec supercar or refining a weekend machine, these carbon fins complete the side profile with purpose.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight carbon fiber construction\u003c\/li\u003e\n\u003cli\u003ePrecision molded for factory-style fitment\u003c\/li\u003e\n\u003cli\u003e2-piece side door splitter set\u003c\/li\u003e\n\u003cli\u003eHigh-gloss UV-resistant clear coat finish\u003c\/li\u003e\n\u003cli\u003eEnhances side profile and aggressive stance\u003c\/li\u003e\n\u003cli\u003eSupercar-inspired performance styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContent:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Side door splitter fins (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade adhesive tape included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2016-2018 Audi R8 V10 (4S Gen 2 Coupe)\u003c\/li\u003e\n\u003cli\u003e2016-2018 Audi R8 V10 Plus (4S Gen 2 Coupe)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eFinish: High-Gloss Clear Coat\u003c\/li\u003e\n\u003cli\u003ePosition: Lower Side Door \/ Side Blade Area\u003c\/li\u003e\n\u003cli\u003eInstallation: Adhesive Mount\u003c\/li\u003e\n\u003cli\u003eWeight: Approx. 0.86 kg (Set)\u003c\/li\u003e\n\u003cli\u003eCondition: Brand New\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eShipping Information:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 2-5 business days for warehouse stock items\u003c\/li\u003e \n\u003cli\u003e\n\u003cstrong\u003eMade-to-Order:\u003c\/strong\u003e Please allow 2-4 weeks for shipping if product requires custom manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExotic detail. Sharper lines. Track-inspired presence. These carbon side splitter fins give your Gen 2 R8 the refined aggression that separates a stock supercar from a fully dialed build.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"K2 Industries","offers":[{"title":"Air Freight (1-2 Weeks)","offer_id":54073883754796,"sku":"62147525229","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/HTB1gv17bEuF3KVjSZK9q6zVtXXan.webp?v=1789503032"},{"product_id":"audi-r8-v10-4s-dry-carbon-fiber-engine-bay-covers-2-piece-kit-2017-2023","title":"Audi R8 V10 4S Dry Carbon Fiber Engine Bay Covers – 2 Piece Kit (2017–2023)","description":"\u003cdiv\u003e\n\n\u003cp\u003eThe Gen 2 R8 is engineered to be admired — especially under the glass. This 2-Piece Prepreg Dry Carbon Fiber Engine Bay Panel Kit is designed to enhance the presentation of your Audi R8 Coupe, adding refined motorsport detail to the V10 engine compartment.\u003c\/p\u003e\n\n\u003cp\u003eManufactured using advanced prepreg dry carbon and autoclave curing, these panels deliver exceptional strength while remaining lightweight. The OEM-inspired design integrates seamlessly into the factory engine bay layout, maintaining the original architecture while elevating its visual impact.\u003c\/p\u003e\n\n\u003cp\u003eThe deep high-gloss UV-protected clear coat enhances the 3K carbon weave and provides long-term durability. Whether you're refining a show build or elevating the details of your street-driven supercar, this engine bay upgrade transforms the presentation of your R8.\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePrepreg dry carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eAutoclave cured for superior strength and lightweight performance\u003c\/li\u003e\n\u003cli\u003eOEM-style precision fitment\u003c\/li\u003e\n\u003cli\u003e2-piece engine bay panel set\u003c\/li\u003e\n\u003cli\u003eHigh-gloss UV-resistant clear coat finish\u003c\/li\u003e\n\u003cli\u003eEnhances engine bay detail and exotic appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContent:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Carbon fiber engine bay panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2023 Audi R8 V10 Coupe (4S Gen 2)\u003c\/li\u003e\n\u003cli\u003eCompatible with RWS and V10 Performance models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Prepreg Dry Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eFinish: High-Gloss Clear Coat\u003c\/li\u003e\n\u003cli\u003eWeight: Approx. 4 kg (Set)\u003c\/li\u003e\n\u003cli\u003eCondition: Brand New\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eShipping Information:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 2-5 business days for warehouse stock items\u003c\/li\u003e \n\u003cli\u003e\n\u003cstrong\u003eMade-to-Order:\u003c\/strong\u003e Please allow 2-4 weeks for shipping if product requires custom manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExposed V10. Exposed carbon. Precision detail. This dry carbon engine bay kit gives your Gen 2 R8 the refined, performance-driven finish that separates a stock presentation from a fully dialed supercar build.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"K2 Industries","offers":[{"title":"Air Freight (1-2 Weeks)","offer_id":54073883918636,"sku":"1601158833487","price":789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/He7fe410ccb2643c18999199125320d08f.webp?v=1789503035"},{"product_id":"2016-2023-audi-r8-v10-coupe-4s-gen-2-engine-bay-panel-kit-pre-preg-dry-carbon-fiber","title":"2016–2023 Audi R8 V10 Coupe 4S Gen 2 Engine Bay Panel Kit – Pre-Preg Dry Carbon Fiber","description":"\u003ch2\u003e2016–2023 Audi R8 V10 Coupe 4S Gen 2 Engine Bay Panel Kit – Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eElevate the visual impact of your second-generation Audi R8 V10 Coupe with this dry carbon fiber engine bay panel kit. Supplied as a three-piece set, it adds exotic-level carbon detail to the exposed V10 engine compartment, integrating with the factory bay layout without disrupting the original architecture.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Pre-preg dry carbon fiber — the resin is pre-impregnated into the weave under controlled conditions before autoclave curing, giving exceptional strength, consistent weave, and a lighter finished component than standard wet carbon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Autoclave cured for superior strength and weight reduction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Deep high-gloss UV-protected clear coat that showcases the exposed carbon weave for premium contrast against the V10 powerplant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Three-piece engine bay panel set · approximately 4 kg for the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Function\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExotic engine bay detail:\u003c\/strong\u003e Adds carbon presentation to the exposed V10 compartment for a true focal point under the glass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Refined dry carbon weave and gloss finish complement the factory engine bay for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Designed to integrate with the factory engine bay layout without disrupting the original architecture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2023 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCompatible with V10 Performance and RWS (rear-wheel-drive) models\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory engine bay layout only\u003c\/strong\u003e — not compatible with the first-generation R8 (Type 42)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3 × carbon fiber engine bay panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanels integrate with the factory engine bay layout\u003c\/strong\u003e — designed to sit in place of or over the corresponding factory panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting hardware is not specified\u003c\/strong\u003e — confirm what's required and source any needed fixings ahead of installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTake care working in the engine bay:\u003c\/strong\u003e ensure panels are clear of moving parts, heat sources, and electrical connections\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for correct fitment and a clean, aligned finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your car is a second-generation R8 V10 Coupe (2016–2023, Type 4S) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify the kit matches your engine bay layout against the product images, as configurations can vary by model year\u003c\/li\u003e\n  \u003cli\u003eKeep any factory panels you remove until fitment is verified\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Air Freight (1-2 Weeks)","offer_id":54073883951404,"sku":"1601279870877","price":639.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_6086905b-8533-44ca-ac87-bb5526a13147.jpg?v=1789503035"},{"product_id":"vw-golf-mk6-mk7-mk8-polo-scirocco-audi-a3-tt-tts-ttrs-r8-billet-aluminum-adjustable-clutch-stop-1j0721381-2005-2021","title":"VW Golf MK6 MK7 MK8 \/ Polo \/ Scirocco \/ Audi A3 TT TTS TTRS R8 Billet Aluminum Adjustable Clutch Stop 1J0721381 2005 - 2021","description":"\u003cp\u003e\nSharpen your clutch engagement and eliminate excessive pedal travel with this adjustable billet aluminum clutch stop, a direct replacement for factory part number 1J0721381 across a wide range of VAG manual transmission applications. By repositioning the clutch bite point just above the stop, it reduces unnecessary pedal movement for smoother, more consistent gear changes and a more connected, confidence-inspiring driving feel. Three height options — 8mm, 10mm, and 12mm — allow precise adjustment to suit individual preference, while the 6061 aluminum body and stainless steel gasket deliver significantly greater durability than the factory plastic or sponge equivalent.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eReduces unnecessary clutch pedal travel – positions the bite point just above the stop for smoother and more consistent gear shifts\u003c\/li\u003e\n\u003cli\u003eThree adjustable height options (8mm · 10mm · 12mm) allow precise tuning to individual driving preference\u003c\/li\u003e\n\u003cli\u003e6061 aluminum alloy body with stainless steel gasket – significantly stronger and more durable than factory plastic or sponge clutch stops\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OEM part number 1J0721381 – verify before ordering\u003c\/li\u003e\n\u003cli\u003eShock-absorbing rubber pad included for refined pedal feel at the stop point\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Adjustable Clutch Pedal Stop\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 Aluminum Alloy \u0026amp; Stainless Steel Gasket\u003c\/li\u003e\n\u003cli\u003eHeight Options: 8mm · 10mm · 12mm\u003c\/li\u003e\n\u003cli\u003eOEM Replacement Part No.: 1J0721381\u003c\/li\u003e\n\u003cli\u003eItem Weight: 0.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A3 Cabriolet 8P (2008–2013)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Cabriolet 8V (2015–2021)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Saloon \/ Sportback 8P (2008–2013)\u003c\/li\u003e\n\u003cli\u003eAudi A3 Saloon \/ Sportback 8V (2013–2020)\u003c\/li\u003e\n\u003cli\u003eAudi R8 Coupe \/ Spyder 42 (2007–2015)\u003c\/li\u003e\n\u003cli\u003eAudi TT \/ TTS Coupe \/ Roadster 8J (2007–2014)\u003c\/li\u003e\n\u003cli\u003eAudi TT \/ TTS Coupe \/ Roadster FV (2015–)\u003c\/li\u003e\n\u003cli\u003eAudi TTRS Coupe \/ Roadster 8J (2010–2014)\u003c\/li\u003e\n\u003cli\u003eVW Beetle 5C (2017–2019)\u003c\/li\u003e\n\u003cli\u003eVW Golf MK6 1K \/ 5K (2008–2013) – Saloon\u003c\/li\u003e\n\u003cli\u003eVW Golf MK7 5G (2013–2017) – Saloon\u003c\/li\u003e\n\u003cli\u003eVW Golf MK8 CD (2020–)\u003c\/li\u003e\n\u003cli\u003eVW Golf Cabriolet 51 \/ 5K (2012–2016)\u003c\/li\u003e\n\u003cli\u003eVW Golf Plus 5M \/ 52 (2005–2014)\u003c\/li\u003e\n\u003cli\u003eVW Polo Hatchback 6R (2010–2014)\u003c\/li\u003e\n\u003cli\u003eVW Polo Hatchback 6C (2015–2018)\u003c\/li\u003e\n\u003cli\u003eVW Scirocco 13 (2009–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x Billet Aluminum Adjustable Clutch Stop\u003c\/li\u003e\n\u003cli\u003e1x Stainless Steel Gasket\u003c\/li\u003e\n\u003cli\u003e1x Shock-Absorbing Rubber Pad\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eShorter clutch pedal travel improves shift speed and reduces driver fatigue during spirited or track driving\u003c\/li\u003e\n\u003cli\u003eConsistent, predictable bite point improves confidence and control in both daily and performance driving\u003c\/li\u003e\n\u003cli\u003e6061 aluminum and stainless steel construction far outlasts factory plastic and sponge alternatives\u003c\/li\u003e\n\u003cli\u003eThree height settings allow fine-tuning without purchasing additional parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eUse an allen wrench to secure the clutch stop base to the clutch pedal bracket\u003c\/li\u003e\n\u003cli\u003eSelect desired height using the included gaskets – options are 8mm, 10mm, and 12mm\u003c\/li\u003e\n\u003cli\u003eApply thread locker (243 grade recommended) to secure the screws after height adjustment\u003c\/li\u003e\n\u003cli\u003eAttach the shock-absorbing rubber pad as the final step\u003c\/li\u003e\n\u003cli\u003eConfirm your factory clutch stop part number is 1J0721381 before ordering\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility, contact our team with your vehicle's year, model, and chassis code prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54073889980716,"sku":"1005009554180708","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Sc30fcf5ed7064331a5f5ee5d2b27ae50K.webp?v=1789503158"},{"product_id":"08-17-audi-a3-a4-a5-a6-a7-a8-q3-q5-q7-r8-rs4-rs5-engine-sensor","title":"08-17 Audi A3 A4 A5 A6 A7 A8 Q3 Q5 Q7 R8 RS4 RS5 Engine Sensor","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch6 class=\"product-title\"\u003eEngine Sensor — Audi A3, A4, A5, A6, A7, A8, Q3, Q5, Q7, R8, RS4, RS5\u003c\/h6\u003e\n\u003cdiv class=\"product-intro\"\u003e\n\u003cp class=\"lead-text\"\u003e\u003cstrong\u003eOEM-compatible engine sensor engineered for reliable performance across Audi's core lineup.\u003c\/strong\u003e Direct replacement for factory units, designed to restore proper sensor function and maintain engine management accuracy. Constructed to handle the demands of modern Audi powertrains.\u003c\/p\u003e\n\u003cdiv class=\"trust-indicators\"\u003e\n\u003cspan class=\"badge\"\u003e✓ In-House Quality Check\u003c\/span\u003e \u003cspan class=\"badge\"\u003e✓ Ships from FL Warehouse\u003c\/span\u003e \u003cspan class=\"badge\"\u003e✓ Direct-from-Warehouse\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch6 class=\"section-title\"\u003eKey Features\u003c\/h6\u003e\n\u003cdiv class=\"design-features\"\u003e\u003cul class=\"feature-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-compatible design\u003c\/strong\u003e - Works with factory engine management systems without recalibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad platform coverage\u003c\/strong\u003e - Single part fits across multiple Audi models and model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement\u003c\/strong\u003e - Mounts to existing sensor location using factory attachment points\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003ch6 class=\"section-title\"\u003eSpecs\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eEngine sensor assembly\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6 class=\"section-title\"\u003eWhats Included\u003c\/h6\u003e\n\u003cul\u003e\u003cli\u003eEngine sensor\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"product-faq\"\u003e\n\u003ch6 class=\"section-title\"\u003eFrequently Asked Questions\u003c\/h6\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill this sensor work without a tune or recalibration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This sensor is engineered as a direct OEM replacement, so it integrates with your factory engine management system without any reprogramming or auxiliary tuning required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need special tools or a shop to install this?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation depends on sensor location—some are accessible from the engine bay and can be swapped with basic hand tools, while others may require partial disassembly. Consult your service manual for the specific removal and installation procedure for your model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's your return policy if this doesn't work with my car?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact our support team directly—we'll verify fitment against your specific vehicle and handle any issues from there.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074408239404,"sku":"K2-10856-AUD-006-EC","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/OEM-SS-092-1.jpg?v=1789515233"},{"product_id":"audi-r8-v8-v10-coupe-carbon-fiber-door-side-panel-blades-2008-2015","title":"Audi R8 V8 \/ V10 Coupe Carbon Fiber Door Side Panel Blades 2008 - 2015","description":"\u003cp\u003e\nElevate the side profile of your Audi R8 V8 or V10 Coupe with these premium carbon fiber door side panel blades, precision manufactured using a 3D design and CNC moulding process with vacuum molding and autoclave curing. Supplied as a pair and designed specifically for the R8 Coupe factory door side panels, these blades replace or overlay the factory side panel inserts — adding a sharp, motorsport-inspired aesthetic to the iconic R8 sideblade section and delivering a more aggressive, track-inspired profile stance. Carbon fiber construction offers a superior strength-to-weight ratio, consistent weave pattern, and refined surface quality that perfectly complements the factory R8 bodywork. The high-gloss epoxy polished surface in carbon black maintains the deep gloss finish over long-term outdoor and driving exposure. Adhesive tape and mounting screws are supplied for a secure and precise installation.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePremium carbon fiber construction – manufactured using 3D design, CNC moulding, vacuum molding, and autoclave curing for superior resin consistency, tighter weave pattern, and refined surface quality\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy polished surface finish in carbon black – maintains the deep gloss carbon appearance over sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired door side panel blade profile – elevates the iconic R8 sideblade section with a premium carbon fiber upgrade\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair (Left \u0026amp; Right) for a complete and symmetrical side panel installation\u003c\/li\u003e\n\u003cli\u003eAdhesive tape or mounting screws supported for a secure, precise installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Door Side Panel Blades\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eColor: Carbon Black\u003c\/li\u003e\n\u003cli\u003eSurface Finish: High-Gloss Epoxy Polished\u003c\/li\u003e\n\u003cli\u003eManufacturing Process: 3D Design · CNC Moulding · Vacuum Molding · Autoclave Cured\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces per set (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eInstallation Method: Adhesive Tape or Mounting Screws\u003c\/li\u003e\n\u003cli\u003ePosition: Door Side Panel\u003c\/li\u003e\n\u003cli\u003eFitment: Audi R8 V8 \/ V10 Coupe Factory Side Panels Only\u003c\/li\u003e\n\u003cli\u003ePurpose: Retrofit \/ Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi R8 V8 Coupe (2008 – 2015)\u003c\/li\u003e\n\u003cli\u003eAudi R8 V10 Coupe (2008 – 2015)\u003c\/li\u003e\n\u003cli\u003eCompatible with first generation R8 (Type 42) Coupe factory side panels only – not compatible with second generation R8 (Type 4S, 2016+) or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eCoupe body style only – confirm body style and engine variant before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Carbon Fiber Door Side Panel Blades (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive Tape for installation included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber construction delivers a premium motorsport-grade aesthetic that elevates the iconic R8 sideblade section beyond the factory finish\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy finish maintains the deep carbon black surface appearance over prolonged outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired blade profile transforms the side profile of the R8 Coupe for a more aggressive, track-inspired presence\u003c\/li\u003e\n\u003cli\u003eLightweight carbon fiber adds a meaningful visual upgrade with minimal impact on overall vehicle weight – critical for a performance-oriented supercar\u003c\/li\u003e\n\u003cli\u003eFlexible installation options – choose between adhesive tape for a reversible fit or mounting screws for a more permanent, secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesive tape supplied – thoroughly clean, degrease, and dry the factory side panel surface before installation to ensure maximum adhesion strength\u003c\/li\u003e\n\u003cli\u003eMounting screw installation available for a more permanent, secure fit – professional installation recommended if using screw fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with first generation R8 (Type 42) Coupe factory side panels only – will not fit second generation R8 (Type 4S, 2016+) or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eEnsure correct left and right orientation before fitting – side panel blades are handed and must be installed on the correct side\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for optimal positioning, symmetrical alignment, and finish quality\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific R8 variant or generation, contact our team with your year, model, engine variant, and chassis code before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eShipping Information:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 2-5 business days for warehouse stock items\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade-to-Order:\u003c\/strong\u003e Please allow 2-4 weeks for shipping if product requires custom manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553270572,"sku":"1600868983724","price":1119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Ha9357218217840c3a33895ca012bbde6V.webp?v=1789519160"},{"product_id":"2016-2019-audi-r8-v10-v10-plus-coupe-4s-e-tron-style-rear-spoiler-set-carbon-fiber","title":"2016–2019 Audi R8 V10 \/ V10 Plus Coupe 4S E-Tron Style Rear Spoiler Set – Carbon Fiber","description":"\u003ch2\u003e2016–2019 Audi R8 V10 \/ V10 Plus Coupe 4S E-Tron Style Rear Spoiler Set – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eElevate the rear profile of your second-generation Audi R8 V10 or V10 Plus Coupe with this E-Tron style carbon fiber rear spoiler set. Supplied as a three-piece kit molded for the factory trunk lid and rear deck, this set adds a sharp, motorsport-inspired accent that completes the R8 silhouette with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Complete three-piece set for coordinated coverage across the trunk lid and rear deck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightweight at approximately 0.66 kg for the full set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eE-Tron style profile:\u003c\/strong\u003e Brings a distinctive performance-variant aesthetic to standard V10 Coupe models for a more aggressive, track-inspired rear end\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory trunk lid and rear deck for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Plus Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe (2-door) only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory bodywork only\u003c\/strong\u003e — not compatible with aftermarket configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the first-generation R8 (Type 42, 2008–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3 × carbon fiber E-Tron style rear spoiler pieces\u003c\/li\u003e\n  \u003cli\u003ePre-applied adhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-drill, adhesive-mounted:\u003c\/strong\u003e Installs with the included adhesive tape — no drilling and no permanent modification to the factory bodywork\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the trunk lid and rear deck at each mounting position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Dry-fit and position all three pieces symmetrically before final adhesion, using the factory spoiler reference points as a guide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best positioning, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your R8 is a second-generation Coupe (2016–2019, Type 4S) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553303340,"sku":"1600825757192","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_34afdf23-83f1-4029-b1a8-be6fc3d709e6.jpg?v=1789519160"},{"product_id":"2010-2015-audi-r8-v8-v10-coupe-type-42-rear-bumper-diffuser-carbon-fiber","title":"2010–2015 Audi R8 V8 \/ V10 Coupe Type 42 Rear Bumper Diffuser – Carbon Fiber","description":"\u003ch2\u003e2010–2015 Audi R8 V8 \/ V10 Coupe Type 42 Rear Bumper Diffuser – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eTransform the rear profile of your first-generation Audi R8 V8 or V10 Coupe with this carbon fiber rear bumper diffuser. A direct-fit retrofit for the factory rear bumper, this diffuser sharpens the lower rear end — visually widening and lowering the rear stance for a more aggressive, motorsport-inspired presence with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-piece diffuser for the lower rear bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 6.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Diffuser profile visually widens and lowers the rear stance for a more track-inspired rear-end presence\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to the contours of the factory rear bumper for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2010–2015 Audi R8 V8 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2010–2015 Audi R8 V10 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe (2-door) only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory rear bumper only\u003c\/strong\u003e — not compatible with aftermarket configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the second-generation R8 (Type 4S, 2016+) or the Spyder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × carbon fiber rear bumper diffuser\u003c\/li\u003e\n  \u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n  \u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape and screw mounted:\u003c\/strong\u003e Secures with both the included adhesive tape and mounting screws for a secure, long-lasting fit suited to sustained driving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the rear bumper at the diffuser position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Ensure the diffuser is centered and symmetrical across the rear bumper before final installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for correct positioning, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis diffuser uses screws in addition to adhesive tape — installation involves hardware mounting, so confirm placement before securing\u003c\/li\u003e\n  \u003cli\u003eConfirm your R8 is a first-generation Coupe (2010–2015, Type 42) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553336108,"sku":"1600825472604","price":1279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_c7a82a25-5e6e-416a-9b7d-9efb65f00146.jpg?v=1789519162"},{"product_id":"audi-r8-v10-v10-plus-coupe-4s-gen-2-carbon-fiber-rear-bumper-canards-2016-2018","title":"Audi R8 V10 \/ V10 Plus Coupe 4S Gen 2 Carbon Fiber Rear Bumper Canards 2016 - 2018","description":"\u003cp\u003e\nAdd a sharp, track-inspired aerodynamic detail to the rear bumper of your Audi R8 V10 or V10 Plus Coupe Gen 2 with these premium carbon fiber rear bumper canards, precision manufactured using a 3D design and CNC moulding process with full autoclave curing. Supplied as a pair and designed specifically for the second generation R8 V10 Coupe factory rear bumper, these rear canards introduce a purposeful aerodynamic visual element to the lower rear bumper corners — visually widening the rear stance and delivering a more aggressive, motorsport-inspired rear-end presence. Carbon fiber construction offers a superior strength-to-weight ratio, consistent weave pattern, and refined surface quality that perfectly complements the factory R8 bodywork. The high-gloss epoxy polished surface maintains the deep carbon finish over long-term outdoor and driving exposure. Adhesive tape is included for a clean, no-drill installation with no permanent modification required to the factory rear bumper.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePremium carbon fiber construction – autoclave cured using 3D design and CNC moulding, delivering superior resin consistency, tighter weave pattern, and refined surface quality\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy polished surface finish – maintains the deep carbon appearance over sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired rear bumper canard profile – adds a purposeful aerodynamic visual element to the lower rear bumper corners of the R8 V10 Coupe\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair (Left \u0026amp; Right) for a complete and symmetrical rear bumper canard installation\u003c\/li\u003e\n\u003cli\u003ePrecision-molded fitment – engineered specifically for the second generation Audi R8 V10 and V10 Plus Coupe factory rear bumper for a seamless OEM-style integration\u003c\/li\u003e\n\u003cli\u003eAdhesive tape included for a clean, no-drill installation with no permanent modification to the factory rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Rear Bumper Canards \/ Splitters\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eSurface Finish: High-Gloss Epoxy Polished\u003c\/li\u003e\n\u003cli\u003eManufacturing Process: 3D Design · CNC Moulding · Autoclave Cured\u003c\/li\u003e\n\u003cli\u003eDimensions: 44 x 31 x 13 cm per piece\u003c\/li\u003e\n\u003cli\u003eWeight: 1.62 kg (pair)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces per set (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eInstallation Method: Adhesive Tape (included)\u003c\/li\u003e\n\u003cli\u003ePosition: Rear Bumper\u003c\/li\u003e\n\u003cli\u003eFitment: Audi R8 V10 \/ V10 Plus Coupe Gen 2 (4S) Factory Rear Bumper Only\u003c\/li\u003e\n\u003cli\u003ePurpose: Retrofit \/ Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi R8 V10 Coupe Gen 2 \/ 4S (2016 – 2018)\u003c\/li\u003e\n\u003cli\u003eAudi R8 V10 Plus Coupe Gen 2 \/ 4S (2016 – 2018)\u003c\/li\u003e\n\u003cli\u003eCompatible with second generation R8 (Type 4S \/ 4S3) Coupe factory rear bumper only – not compatible with first generation R8 (Type 42, 2008-2015), Spyder, or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eCoupe 2-door body style only – confirm body style, engine variant, and generation before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Carbon Fiber Rear Bumper Canards (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive Tape for installation included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber construction delivers a premium motorsport-grade aesthetic that elevates the rear-end styling of the R8 V10 beyond the factory finish\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy finish maintains the deep carbon surface appearance over prolonged outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired canard profile visually widens the rear stance of the R8 Gen 2 Coupe for a more aggressive, track-inspired rear-end presence\u003c\/li\u003e\n\u003cli\u003eAt just 1.62 kg for the complete pair, these rear canards add a meaningful visual upgrade with virtually no impact on rear-end weight distribution\u003c\/li\u003e\n\u003cli\u003eAdhesive tape fitment is clean and reversible – no drilling, no bumper modification, and no permanent commitment to the factory bodywork required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesive tape supplied – thoroughly clean, degrease, and dry the factory rear bumper surface at the intended canard positions before installation to ensure maximum adhesion strength\u003c\/li\u003e\n\u003cli\u003eNo drilling or permanent bodywork modification required – fully reversible installation\u003c\/li\u003e\n\u003cli\u003eCompatible with second generation R8 (Type 4S \/ 4S3) Coupe factory rear bumper only – will not fit first generation R8 (Type 42, 2008-2015), Spyder, or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eEnsure correct left and right orientation before fitting – rear canards are handed and must be installed on the correct side\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for optimal canard positioning, symmetrical alignment, and finish quality\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific R8 variant or generation, contact our team with your year, model, engine variant, and chassis code (Type 42 \/ Type 4S) before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eShipping Information:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 2-5 business days for warehouse stock items\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade-to-Order:\u003c\/strong\u003e Please allow 2-4 weeks for shipping if product requires custom manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553368876,"sku":"62127614799","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/HTB1v1n1XLWG3KVjSZFgq6zTspXa5.webp?v=1789519161"},{"product_id":"2016-2019-audi-r8-v10-coupe-4s-gen-2-gt-style-rear-wing-spoiler-carbon-fiber","title":"2016–2019 Audi R8 V10 Coupe 4S Gen 2 GT Style Rear Wing Spoiler – Carbon Fiber","description":"\u003ch2\u003e2016–2019 Audi R8 V10 Coupe 4S Gen 2 GT Style Rear Wing Spoiler – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eDominate the rear profile of your second-generation Audi R8 V10 Coupe with this GT-style carbon fiber rear wing spoiler. Styled after the aggressive R8 GT performance profile and molded for the factory trunk lid, this single-deck wing adds a bold, motorsport-inspired statement to the rear deck and completes the R8 silhouette with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-deck GT-style wing, supplied as a single piece\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 4.76 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGT-inspired profile:\u003c\/strong\u003e Brings the aggressive R8 GT wing aesthetic to standard V10 Coupe models for a dramatically more track-inspired rear end\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to the contours of the factory trunk lid for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Plus Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe (2-door) only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory trunk lid only\u003c\/strong\u003e — not compatible with aftermarket trunk lids or configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the first-generation R8 (Type 42, 2008–2015) or the Spyder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × carbon fiber GT-style rear wing spoiler\u003c\/li\u003e\n  \u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew-mounted:\u003c\/strong\u003e Secures with the included mounting hardware for a rigid, durable fit built to withstand sustained high-speed driving and airflow pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrilling required:\u003c\/strong\u003e Installation uses factory trunk-lid mounting points and\/or drilling — this is a permanent modification, not a reversible fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Ensure the wing is centered and symmetrical across the trunk lid before final tightening\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation strongly recommended\u003c\/strong\u003e for correct positioning, hole placement, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a drill-mount wing — installation is permanent and requires modifying the trunk lid, so confirm placement carefully before drilling\u003c\/li\u003e\n  \u003cli\u003eConfirm your R8 is a second-generation Coupe (2016–2019, Type 4S) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553401644,"sku":"1600829783891","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_40e3eb11-539c-4001-8cb9-9b8b4f788c85.jpg?v=1789519161"},{"product_id":"2016-2019-audi-r8-v10-v10-plus-coupe-side-skirts-carbon-fiber","title":"2016–2019 Audi R8 V10 \u0026 V10 Plus Coupe Side Skirts – Carbon Fiber","description":"\u003ch2\u003e2016–2019 Audi R8 V10 \u0026amp; V10 Plus Coupe Side Skirts – Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eCarbon fiber side skirts for the second-generation Audi R8 V10 and V10 Plus Coupe (Type 4S). A sculpted left-and-right pair that extends the lower body outward, visually lowering the ride height for a more aggressive, track-inspired side stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon fiber for a superior strength-to-weight ratio and consistent weave pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for refined surface quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.86 kg for the complete pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 195 x 18 x 11 cm per piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE \u0026amp; RoHS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Side Stance:\u003c\/strong\u003e Extends the lower body outward and visually lowers the ride height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Sport-focused skirt profile sharpens the car's flanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Carbon construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Designed to sit flush against the factory rocker panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2019 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2019 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation R8 (Type 4S) Coupe factory rocker panels only. Not compatible with the first-generation R8 (Type 42, 2008–2015), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Carbon Fiber Side Skirts (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape and mounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eCombined installation using both the included adhesive tape and mounting screws for a secure, long-lasting fit suitable for sustained driving. Thoroughly clean, degrease, and dry the rocker panel surfaces first for maximum adhesion. The skirts are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both skirts and confirm the carbon weave, finish, and fitment before installation. These skirts are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553434412,"sku":"60509659147","price":1169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_accd4645-f3ba-4e28-b7a0-b831fb47e146.jpg?v=1789519161"},{"product_id":"2016-2019-audi-r8-v10-v10-plus-coupe-4s-gen-2-rear-bumper-blades-carbon-fiber","title":"2016–2019 Audi R8 V10 \/ V10 Plus Coupe 4S Gen 2 Rear Bumper Blades – Carbon Fiber","description":"\u003ch2\u003e2016–2019 Audi R8 V10 \/ V10 Plus Coupe 4S Gen 2 Rear Bumper Blades – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eAdd a sharp, motorsport-inspired detail to the rear of your second-generation Audi R8 V10 or V10 Plus Coupe with these carbon fiber rear bumper blades. Supplied as a handed pair for the lower rear bumper corners, the blades visually widen the rear stance and give the R8 a more aggressive, track-inspired presence while adding a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Supplied as a handed pair (left and right) for a symmetrical installation across both lower rear bumper corners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightweight at approximately 0.65 kg for the complete pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Blade profile at the lower rear corners visually widens the rear stance for a more track-inspired look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory rear bumper for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2019 Audi R8 V10 Plus Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe (2-door) only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory rear bumper only\u003c\/strong\u003e — not compatible with aftermarket bumpers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the first-generation R8 (Type 42, 2008–2015) or the Spyder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × carbon fiber rear bumper blades (left and right)\u003c\/li\u003e\n  \u003cli\u003ePre-applied adhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-drill, adhesive-mounted:\u003c\/strong\u003e Installs with the included adhesive tape — no drilling and no permanent modification to the factory bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the bumper at each blade position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck orientation:\u003c\/strong\u003e The blades are handed — confirm correct left and right sides before final adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best positioning, symmetrical alignment, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your R8 is a second-generation Coupe (2016–2019, Type 4S) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553467180,"sku":"1600830061122","price":649.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_5d90d526-2b11-4fcf-8fef-5cc425ba489f.jpg?v=1789519162"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-4s-gen-2-front-bumper-lip-spoiler-set-carbon-fiber","title":"2016–2018 Audi R8 V10 \/ V10 Plus Coupe 4S Gen 2 Front Bumper Lip Spoiler Set – Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \/ V10 Plus Coupe 4S Gen 2 Front Bumper Lip Spoiler Set – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eSharpen the front-end stance of your second-generation Audi R8 V10 or V10 Plus Coupe with this carbon fiber front bumper lip spoiler set. Supplied as a three-piece kit engineered for the factory front bumper, the lip extends the lower bumper profile forward for a more aggressive, purposeful presence while adding a genuine carbon weave finish to the front end.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Complete three-piece set (center section plus left and right wings) for coverage across the full lower bumper profile\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightweight construction at approximately 1.6 kg for the full set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Extends the lower bumper forward to visually lower the front end and give the R8 a more track-inspired forward profile\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory front bumper for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2018 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2016–2018 Audi R8 V10 Plus Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe (2-door) only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory front bumper only\u003c\/strong\u003e — not compatible with aftermarket bumpers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the first-generation R8 (Type 42, 2008–2015), the Spyder, or the facelifted 2019-onward R8, which uses a redesigned front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3 × carbon fiber front lip spoiler pieces (center, left wing, right wing)\u003c\/li\u003e\n  \u003cli\u003ePre-applied adhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-drill, adhesive-mounted:\u003c\/strong\u003e Installs with the included adhesive tape — no drilling and no permanent modification to the factory bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the bumper at each mounting position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Dry-fit and position all three pieces symmetrically before final adhesion so the center section and wings line up evenly across the bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best positioning, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your R8 is a pre-facelift second-generation Coupe (2016–2018, Type 4S) before ordering — the 2019-onward facelift front bumper is a different shape and will not accept this lip\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553532716,"sku":"1600825720001","price":1119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_fafb4cce-935c-428a-bae5-4776b58c29ee.jpg?v=1789519163"},{"product_id":"2008-2014-audi-r8-2008-2012-audi-tt-side-wing-mirror-covers-carbon-fiber","title":"2008–2014 Audi R8 \/ 2008–2012 Audi TT Side Wing Mirror Covers – Carbon Fiber","description":"\u003ch2\u003e2008–2014 Audi R8 \/ 2008–2012 Audi TT Side Wing Mirror Covers – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eUpgrade the side profile of your Audi R8 or TT with these carbon fiber side wing mirror covers. Supplied as a handed pair, the covers slip over the factory mirror housings to add a premium, motorsport-grade carbon aesthetic — with no permanent modification to the original mirrors.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, manufactured using a 3D design, CNC moulding, vacuum molding, and autoclave curing process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished finish in carbon black that holds its deep gloss appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Supplied as a handed pair (left and right) for a symmetrical installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFit type:\u003c\/strong\u003e Slip-on covers that fit over the factory mirror housings without affecting mirror function or folding operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss black finish elevate the side profile with a premium, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to the shape of the factory mirror housings for a clean, seamless slip-on fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunction retained:\u003c\/strong\u003e Covers the housings as a styling element without interfering with mirror adjustment or power-folding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e2008–2014 Audi R8 Coupe \/ Spyder\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e2008–2012 Audi TT\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits factory side mirror housings only\u003c\/strong\u003e — not compatible with aftermarket or replacement mirror configurations\u003c\/li\u003e\n  \u003cli\u003eNot compatible with later-generation mirror housings outside the listed year ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × carbon fiber side wing mirror covers (left and right)\u003c\/li\u003e\n  \u003cli\u003eMirror cover removal tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlip-on, tool-assisted:\u003c\/strong\u003e Uses the included removal tool to detach the factory mirror caps before fitting the carbon covers — no drilling and no permanent modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrect tool placement:\u003c\/strong\u003e Follow proper tool positioning to safely release the factory caps without damaging the housings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck orientation:\u003c\/strong\u003e The covers are handed — confirm correct left and right sides before fitting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best alignment, symmetrical fit, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your mirror configuration matches the factory housings for your model and year before ordering\u003c\/li\u003e\n  \u003cli\u003eR8 fitment covers 2008–2014; TT fitment covers 2008–2012 — verify your model year falls within the correct range\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible, but take care releasing the factory caps to avoid damaging the original housings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553565484,"sku":"60560535801","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_d9a33061-a681-46ee-ad03-1ef77827e4c9.jpg?v=1789519164"},{"product_id":"2008-2015-audi-r8-v8-v10-coupe-type-42-front-lip-spoiler-carbon-fiber","title":"2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 Front Lip Spoiler – Carbon Fiber","description":"\u003ch2\u003e2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 Front Lip Spoiler – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eSharpen the front-end stance of your first-generation Audi R8 V8 or V10 with this carbon fiber front lip spoiler. A direct-fit retrofit for the factory front bumper, this lip extends the lower bumper profile forward to visually lower the front end for a more aggressive, track-inspired presence with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, manufactured using a 3D design, CNC moulding, vacuum molding, and autoclave curing process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished finish in carbon black that holds its deep gloss appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-piece front lip for the lower front bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 8.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Extends the lower bumper forward to visually lower the front end for a more track-inspired forward profile\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss black finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory front bumper for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V8 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V10 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory front bumper only\u003c\/strong\u003e — not compatible with aftermarket bumper configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the second-generation R8 (Type 4S, 2016+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × carbon fiber front lip spoiler\u003c\/li\u003e\n  \u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew-mounted:\u003c\/strong\u003e Secures with the included mounting hardware for a strong, durable fit built to withstand sustained driving and high-speed airflow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrilling required:\u003c\/strong\u003e Installation uses factory front-lip mounting points and\/or drilling — this is a permanent modification, not a reversible fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Ensure the lip is centered and symmetrical across the front bumper before final installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation strongly recommended\u003c\/strong\u003e for correct positioning, hole placement, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is a screw-mount lip — installation is permanent and may require drilling, so confirm placement carefully before securing\u003c\/li\u003e\n  \u003cli\u003eConfirm your R8 is a first-generation Coupe (2008–2015, Type 42) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify engine variant and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553598252,"sku":"60528647157","price":1339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_cd6bcf16-d27d-4e93-b4ff-7762229c2328.jpg?v=1789519164"},{"product_id":"2008-2015-audi-r8-v8-v10-coupe-type-42-rear-deck-wing-spoiler-carbon-fiber","title":"2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 Rear Deck Wing Spoiler – Carbon Fiber","description":"\u003ch2\u003e2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 Rear Deck Wing Spoiler – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eFinish the rear profile of your first-generation Audi R8 V8 or V10 with this carbon fiber rear deck wing. A direct-fit retrofit for the factory rear deck, this single-deck wing adds a sharp, motorsport-inspired accent to the rear engine cover, completing the R8 silhouette with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, manufactured using a 3D design, CNC moulding, vacuum molding, and autoclave curing process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished finish in carbon black that holds its deep gloss appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-deck wing, supplied as a single piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Sharp wing profile on the rear engine cover completes the R8 silhouette for a more track-inspired rear end\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss black finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory rear deck for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V8 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V10 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory rear deck only\u003c\/strong\u003e — not compatible with aftermarket deck configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the second-generation R8 (Type 4S, 2016+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × carbon fiber rear deck wing\u003c\/li\u003e\n  \u003cli\u003ePre-applied adhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-drill, adhesive-mounted:\u003c\/strong\u003e Installs with the included adhesive tape — no drilling and no permanent modification to the factory deck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the rear deck at the wing position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Ensure the wing is centered and symmetrical across the rear deck before final adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best positioning, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your R8 is a first-generation Coupe (2008–2015, Type 42) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify engine variant and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible, but adhesive removal and re-prep may be required if the wing needs repositioning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553696556,"sku":"60517628222","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_5fdea2ee-bc4a-4fd2-91c6-5d8f55448de1.jpg?v=1789519165"},{"product_id":"2017-2024-audi-r8-v10-v10-gt-coupe-4s-gen-2-side-skirts-carbon-fiber","title":"2017–2024 Audi R8 V10 \/ V10 GT Coupe 4S Gen 2 Side Skirts – Carbon Fiber","description":"\u003ch2\u003e2017–2024 Audi R8 V10 \/ V10 GT Coupe 4S Gen 2 Side Skirts – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eSharpen the side profile of your second-generation Audi R8 V10 or V10 GT with these carbon fiber side skirts. Supplied as a handed pair and molded for the factory rocker panels, the skirts extend the lower body outward for a more aggressive, track-inspired side stance with a genuine carbon weave finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber, manufactured using a 3D design, CNC moulding, vacuum molding, and autoclave curing process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e High-gloss epoxy-polished finish in carbon black that holds its deep gloss appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Supplied as a handed pair (left and right) for a symmetrical installation across both rocker panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAggressive stance:\u003c\/strong\u003e Extends the lower body outward to visually lower the ride height for a more track-inspired side profile\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e Directional weave and gloss black finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to follow the contours of the factory rocker panels for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2017–2024 Audi R8 V10 Coupe\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2017–2024 Audi R8 V10 GT (5.2)\u003c\/strong\u003e (second generation, Type 4S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory rocker panels only\u003c\/strong\u003e — not compatible with aftermarket configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the first-generation R8 (Type 42, 2008–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × carbon fiber side skirts (left and right)\u003c\/li\u003e\n  \u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible mounting:\u003c\/strong\u003e Fits with the included adhesive tape for a reversible install, or with mounting screws for a more permanent, secure fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the rocker panels before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck orientation:\u003c\/strong\u003e The skirts are handed — confirm correct left and right sides before fitting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for the best positioning, symmetrical alignment, and finish — especially if using the screw-mount option\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your R8 is a second-generation Coupe (2017–2024, Type 4S) before ordering\u003c\/li\u003e\n  \u003cli\u003eDecide on tape vs. screw mounting ahead of install — screw mounting is more permanent and best done professionally\u003c\/li\u003e\n  \u003cli\u003eVerify engine variant and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074553762092,"sku":"60530113283","price":1139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_492e575f-a8a0-4878-88a8-24bf95f760b5.jpg?v=1789519165"},{"product_id":"2008-2015-audi-r8-v8-v10-coupe-type-42-gt-style-rear-wing-spoiler-carbon-fiber","title":"2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 GT Style Rear Wing Spoiler – Carbon Fiber","description":"\u003ch2\u003e2008–2015 Audi R8 V8 \/ V10 Coupe Type 42 GT Style Rear Wing Spoiler – Carbon Fiber\u003c\/h2\u003e\n\n\u003cp\u003eFinish the rear profile of your first-generation Audi R8 V8 or V10 Coupe with this GT-style carbon fiber rear wing spoiler. Styled after the aggressive R8 GT performance profile and molded for the factory trunk lid, this single-deck wing adds a sharp, motorsport-inspired accent to the rear deck and completes the R8 silhouette with a genuine 3K twill carbon finish.\u003c\/p\u003e\n\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine carbon fiber in a 3K twill weave, autoclave cured using a 3D design and CNC moulding process for consistent resin distribution and a tight, uniform weave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Polished to a deep shine and protected with a high-gloss epoxy finish that holds its carbon appearance through sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-deck GT-style wing, supplied as a single piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGT-inspired profile:\u003c\/strong\u003e Sharp, motorsport-inspired wing that completes the R8 silhouette for a more aggressive, track-inspired rear end\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCarbon aesthetic:\u003c\/strong\u003e 3K twill weave and polished gloss finish complement the R8's factory bodywork for a coordinated, motorsport-grade look\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-style integration:\u003c\/strong\u003e Precision-molded to the contours of the factory trunk lid for a clean, seamless fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V8 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2008–2015 Audi R8 V10 Coupe\u003c\/strong\u003e (first generation, Type 42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody style:\u003c\/strong\u003e Coupe only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFits the factory trunk lid only\u003c\/strong\u003e — not compatible with aftermarket configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the second-generation R8 (Type 4S, 2016+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × carbon fiber GT-style rear wing spoiler\u003c\/li\u003e\n  \u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n  \u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape and screw mounted:\u003c\/strong\u003e Secures with both the included adhesive tape and mounting screws for a secure, long-lasting fit suited to sustained driving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface prep:\u003c\/strong\u003e Thoroughly clean, degrease, and dry the trunk lid at the wing position before fitting to ensure maximum adhesion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Ensure the wing is centered and symmetrical across the trunk lid before final installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended\u003c\/strong\u003e for correct positioning, panel-gap consistency, and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis wing uses screws in addition to adhesive tape — installation involves hardware mounting, so confirm placement before securing\u003c\/li\u003e\n  \u003cli\u003eConfirm your R8 is a first-generation Coupe (2008–2015, Type 42) before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify body style and generation using your model year and chassis code if you are unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074555269420,"sku":"60572732001","price":979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_af600607-990d-46d2-b2a0-536548e80cc4.jpg?v=1789519167"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-custom-style-front-lip-splitter-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe Custom Style Front Lip Splitter – Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe Custom Style 3-Piece Front Lip Splitter – Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eCarbon fiber front bumper lip splitter in a custom-style design for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A coordinated 3-piece set that extends the lower bumper forward and visually lowers the front end for a more aggressive, track-inspired stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon fiber for a superior strength-to-weight ratio and consistent weave pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for refined surface quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.64 kg for the complete 3-piece set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 180.5 x 66 x 6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Custom-style splitter profile that stands apart from standard front lip designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Extends the lower bumper forward and visually lowers the front end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinctive Silhouette:\u003c\/strong\u003e Custom-style profile sets the car apart from factory-styled examples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Carbon construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Lower Coverage:\u003c\/strong\u003e 3-piece design spans the complete lower bumper profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 x Carbon Fiber Custom Style Front Lip Splitter Pieces (center splitter and left\/right wings)\u003c\/li\u003e\n\u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eScrew-mounted installation using the included hardware for a secure, rigid fit built to withstand sustained driving and high-speed airflow. Installation uses the factory bumper mounting points and may require drilling. Ensure all three pieces are positioned symmetrically, with the center splitter and left\/right wings aligned precisely across the bumper, before final fitment. Professional installation is strongly recommended for correct positioning, panel gaps, and finish quality.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect all three pieces and confirm the carbon weave, finish, and fitment before installation. This splitter set is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074555892012,"sku":"1600240674357","price":1339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_522b38a0-2ac6-4e5b-8cbb-b9785538ee18.jpg?v=1789519237"},{"product_id":"2019-2023-audi-r8-v10-coupe-side-skirt-extensions-prepreg-dry-carbon-fiber","title":"2019–2023 Audi R8 V10 Coupe Side Skirt Extensions – Prepreg Dry Carbon Fiber","description":"\u003ch2\u003e2019–2023 Audi R8 V10 Coupe Side Skirt Extensions – Prepreg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePrepreg dry carbon fiber side skirt extensions for the second-generation facelift Audi R8 V10 Coupe (Type 4S). A sculpted left-and-right pair that extends the lower body outward, visually lowering the ride height for a more aggressive, track-inspired side stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Prepreg dry carbon fiber with an optimal fiber-to-resin ratio for a strong, lightweight build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent weave quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface in carbon black that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Double-deck skirt extension profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Precision-molded for the factory rocker panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Side Stance:\u003c\/strong\u003e Extends the lower body outward and visually lowers the ride height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Sport-focused skirt profile sharpens the car's flanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Prepreg construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Designed to sit flush against the factory rocker panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 GT Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation facelift R8 (Type 4S) Coupe factory rocker panels only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Prepreg Dry Carbon Fiber Side Skirt Extensions (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFlexible installation using the included adhesive tape for a clean, reversible fit, or mounting screws for a more permanent, secure hold. Thoroughly clean, degrease, and dry the rocker panel surfaces first for maximum adhesion. The skirts are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended — especially for screw fitment — for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both skirts and confirm the carbon weave, finish, and fitment before installation. These skirts are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074555990316,"sku":"1600987916664","price":1589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_c6e0d15d-6f04-49cf-bb0e-771a005b2572.jpg?v=1789519237"},{"product_id":"2019-2023-audi-r8-v10-coupe-mirror-covers-prepreg-dry-carbon-fiber","title":"2019–2023 Audi R8 V10 Coupe Mirror Covers – Prepreg Dry Carbon Fiber","description":"\u003ch2\u003e2019–2023 Audi R8 V10 Coupe Mirror Covers – Prepreg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePrepreg dry carbon fiber side mirror covers for the second-generation facelift Audi R8 V10 Coupe (Type 4S). A precision-molded left-and-right pair that slips over the factory mirror housings with adhesive backing, adding a sharp, motorsport-inspired detail with no drilling required.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Prepreg dry carbon fiber with an optimal fiber-to-resin ratio for a strong, lightweight build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent weave quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface in carbon black that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightweight construction that adds minimal mass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Precision-molded to match the factory mirror housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Accent:\u003c\/strong\u003e Transforms the factory mirror housings into a genuine carbon styling element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-Catching Depth:\u003c\/strong\u003e Glossy carbon weave creates dynamic reflections and visual depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Function Retained:\u003c\/strong\u003e Slip-on design does not affect mirror function or folding operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Adhesive fitment requires no drilling or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 GT Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits second-generation facelift R8 (Type 4S) Coupe factory mirror housings only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket mirror configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Prepreg Dry Carbon Fiber Mirror Covers (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive slip-on installation over the factory mirror housings using the included tape — no drilling or permanent modification required, and fully reversible. Thoroughly clean, degrease, and dry the mirror surface first for maximum adhesion. The covers are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended for the best alignment, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both covers and confirm the carbon weave, finish, and fitment before installation. These covers are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074555924780,"sku":"1600994001025","price":659.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_e8521918-3be8-4c9d-b29e-9c1b4f83d239.jpg?v=1789519237"},{"product_id":"2019-2023-audi-r8-v10-coupe-front-bumper-lip-splitter-prepreg-dry-carbon-fiber","title":"2019–2023 Audi R8 V10 Coupe Front Bumper Lip Splitter – Prepreg Dry Carbon Fiber","description":"\u003ch2\u003e2019–2023 Audi R8 V10 Coupe Front Bumper Lip Splitter – Prepreg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePrepreg dry carbon fiber front bumper lip splitter for the second-generation facelift Audi R8 V10 Coupe (Type 4S). A double-deck, sport-inspired profile that extends the lower bumper forward and visually lowers the front end for a more aggressive, track-inspired stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Prepreg dry carbon fiber with an optimal fiber-to-resin ratio for a strong, lightweight build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent weave quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface in carbon black that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Double-deck lip splitter profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Precision-molded for the factory front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Extends the lower bumper forward and visually lowers the front end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Splitter styling adds a purposeful, motorsport-influenced look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Prepreg construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Designed to sit flush against the factory front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation facelift R8 (Type 4S) Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Prepreg Dry Carbon Fiber Front Bumper Lip Splitter\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFlexible installation using the included adhesive tape for a clean, reversible fit, or mounting screws for a more permanent, secure hold. Thoroughly clean, degrease, and dry the bumper surface first for maximum adhesion, and ensure the splitter is centered and symmetrically aligned before final fitment. Professional installation is recommended — especially for screw fitment — for the best positioning, panel gaps, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the splitter and confirm the carbon weave, finish, and fitment before installation. This splitter is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556055852,"sku":"1600993995154","price":1769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/H5b5b46a0994848579938d345df9b1601V.webp?v=1789519237"},{"product_id":"2022-2023-audi-r8-v10-gt-performance-coupe-p-style-front-bumper-canards-dry-carbon-fiber","title":"2022–2023 Audi R8 V10 GT \u0026 Performance Coupe P-Style Front Bumper Canards – Dry Carbon Fiber","description":"\u003ch2\u003e2022–2023 Audi R8 V10 GT \u0026amp; Performance Coupe P-Style Front Bumper Canards – Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber front bumper canards in P-style design for the second-generation facelift Audi R8 V10 GT and V10 Performance Coupe (Type 4S). A sculpted left-and-right pair for the lower front corners that visually widens the front stance with a sharp, track-inspired detail — mounted with adhesive backing and no drilling required.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e P-style performance canard profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 43 x 20 x 13 cm per piece (16.93 x 7.87 x 5.12 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE \u0026amp; RoHS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Canards visually widen the front end for a more purposeful look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Detail:\u003c\/strong\u003e Sharp motorsport-influenced profile at the lower front corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Dry carbon construction adds visual impact with virtually no weight penalty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Adhesive fitment requires no drilling or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 GT Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation facelift R8 (Type 4S) GT and V10 Performance Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Dry Carbon Fiber Front Bumper Canards (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive installation using the included tape — no drilling or permanent modification required, and fully reversible. Thoroughly clean, degrease, and dry the bumper surface at the intended canard positions first for maximum adhesion. The canards are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both canards and confirm the carbon weave, finish, and fitment before installation. These canards are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556023084,"sku":"1600868735158","price":689.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_3c2c977b-abe0-4812-8777-4c61353d1b4a.jpg?v=1789519237"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-custom-ducktail-rear-wing-spoiler-dry-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe Custom Ducktail Rear Wing Spoiler – Dry Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe Custom Ducktail Rear Wing Spoiler – Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber rear wing spoiler in an exclusive custom ducktail design for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A sharp, motorsport-inspired ducktail profile that completes the R8 silhouette for a more aggressive, track-inspired rear-end stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-deck ducktail wing profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Custom ducktail design that stands apart from standard GT-style wings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Rear Stance:\u003c\/strong\u003e Ducktail profile sharpens the rear-end appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinctive Silhouette:\u003c\/strong\u003e Custom design sets the car apart from factory-styled examples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Dry carbon construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Precision-molded to sit flush on the factory trunk lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory trunk lid only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dry Carbon Fiber Custom Ducktail Rear Wing Spoiler\u003c\/li\u003e\n\u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eScrew-mounted installation using the included hardware for a secure, rigid fit built to withstand sustained high-speed driving and airflow pressure. Installation uses the factory trunk lid mounting points and may require drilling. Ensure the ducktail wing is centered and symmetrically aligned across the trunk lid before final fitment. Professional installation is strongly recommended for correct positioning, panel gaps, and finish quality.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the wing and confirm the carbon weave, finish, and fitment before installation. This wing is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556547372,"sku":"1700004481871","price":1939.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_2ebc2142-d7da-4268-8141-04a1bd491fbc.jpg?v=1789519240"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-v-design-front-lip-spoiler-dry-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe V-Design Front Lip Spoiler – Dry Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe V-Design Front Lip Spoiler – Dry \u003cimg\u003e\u003cimg\u003e\u003cimg\u003e\u003cimg\u003e\u003cimg\u003e\u003cimg\u003e\u003cimg\u003e\u003cimg\u003eCarbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber front bumper lip spoiler in an exclusive V-design for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A distinctive profile that extends the lower bumper forward and visually lowers the front end for a more aggressive, track-inspired stance.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.62 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 188 x 73 x 13 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Exclusive V-design profile that stands apart from standard front lip designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Extends the lower bumper forward and visually lowers the front end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinctive Silhouette:\u003c\/strong\u003e V-design profile sets the car apart from factory-styled examples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Dry carbon construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Precision-molded to sit flush against the factory front bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dry Carbon Fiber V-Design Front Lip Spoiler\u003c\/li\u003e\n\u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eScrew-mounted installation using the included hardware for a secure, rigid fit built to withstand sustained driving and high-speed airflow. Installation uses the factory bumper mounting points and may require drilling. Ensure the lip is centered and symmetrically aligned across the bumper before final fitment. Professional installation is strongly recommended for correct positioning, panel gaps, and finish quality.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the lip and confirm the carbon weave, finish, and fitment before installation. This lip is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556580140,"sku":"1600825441512","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_20692dcf-5e30-4355-b009-0b5677745977.jpg?v=1789519240"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-a-style-front-fins-diveplanes-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe A-Style Front Fins Diveplanes – Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe A-Style Front Fins Diveplanes – Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eCarbon fiber front fins in an A-style diveplane design for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A coordinated 4-piece set for the lower front corners that visually widens the front stance with a sharp, track-inspired detail — mounted with adhesive backing and no drilling required.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon fiber for a superior strength-to-weight ratio and consistent weave pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for refined surface quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 kg for the complete 4-piece set — virtually no impact on front-end weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 60 x 21 x 12 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e A-style diveplane profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Fins visually widen the front end for a more purposeful look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Detail:\u003c\/strong\u003e Sharp motorsport-influenced diveplane profile at the lower front corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Carbon construction adds visual impact with virtually no weight penalty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Adhesive fitment requires no drilling or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Carbon Fiber A-Style Front Fins Diveplanes\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive installation using the included tape — no drilling or permanent modification required, and fully reversible. Thoroughly clean, degrease, and dry the bumper surface at the intended fin positions first for maximum adhesion. The left and right fins are handed, so ensure all four pieces are positioned correctly and symmetrically before final fitment. Professional installation is recommended for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect all four pieces and confirm the carbon weave, finish, and fitment before installation. These fins are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556678444,"sku":"1600825531907","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/H8323391c63c346398734ca30adb47234k.webp?v=1789519240"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-custom-style-rear-bumper-lip-diffuser-dry-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe Custom Style Rear Bumper Lip Diffuser – Dry Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe Custom Style Rear Bumper Lip Diffuser – Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber rear bumper lip diffuser in a custom-style design for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A sculpted profile that visually widens and lowers the rear stance for a more aggressive, motorsport-inspired presence, secured with screw mounting for a rigid fit.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 127.6 x 47.2 x 27 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Custom-style diffuser profile that stands apart from standard rear lip designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Rear Stance:\u003c\/strong\u003e Sculpted profile visually widens and lowers the rear end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinctive Silhouette:\u003c\/strong\u003e Custom-style design sets the car apart from factory-styled examples\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Diffuser styling adds a purposeful, motorsport-influenced look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Precision-molded to sit flush against the factory rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory rear bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dry Carbon Fiber Custom Style Rear Bumper Lip Diffuser\u003c\/li\u003e\n\u003cli\u003eMounting screws for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eScrew-mounted installation using the included hardware for a secure, rigid fit built to withstand sustained driving and high-speed airflow. Installation uses the factory bumper mounting points and may require drilling. Ensure the diffuser is centered and symmetrically aligned across the rear bumper before final fitment. Professional installation is strongly recommended for correct positioning, panel gaps, and finish quality.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the diffuser and confirm the carbon weave, finish, and fitment before installation. This diffuser is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556645676,"sku":"1600221241311","price":1979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_10a9e8ca-5be3-44cb-bc8c-aae575578e55.jpg?v=1789519240"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-rear-bumper-vent-covers-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe Rear Bumper Vent Covers – Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe Rear Bumper Vent Covers – Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eCarbon fiber rear bumper vent fender covers for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A precision-molded left-and-right pair that overlays the factory vent openings, elevating the rear quarter panel transition with a sharp carbon detail — mounted with adhesive backing and no drilling required.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon fiber for a superior strength-to-weight ratio and consistent weave pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC milling, and autoclave curing for refined surface quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 135 x 20 x 10 cm (53.15 x 7.87 x 3.94 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE \u0026amp; RoHS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Finish\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-End Accent:\u003c\/strong\u003e Overlays the factory rear bumper vents with a premium carbon detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-Catching Depth:\u003c\/strong\u003e Glossy carbon weave creates dynamic reflections and visual depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Presence:\u003c\/strong\u003e Sharpens the rear quarter panel transition for a track-inspired look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Adhesive fitment requires no drilling or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory rear bumper vents only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Carbon Fiber Rear Bumper Vent Covers (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive installation using the included tape — no drilling or permanent modification required, and fully reversible. Thoroughly clean, degrease, and dry the rear bumper vent surfaces first for maximum adhesion. The covers are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both covers and confirm the carbon weave, finish, and fitment before installation. These covers are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556612908,"sku":"1600924152360","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_33c0dbb2-1545-4fa1-b20c-9d52d6b71360.jpg?v=1789519240"},{"product_id":"2016-2018-audi-r8-v10-v10-plus-coupe-front-bumper-canards-dry-carbon-fiber","title":"2016–2018 Audi R8 V10 \u0026 V10 Plus Coupe Front Bumper Canards – Dry Carbon Fiber","description":"\u003ch2\u003e2016–2018 Audi R8 V10 \u0026amp; V10 Plus Coupe Front Bumper Canards – Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber front bumper canards for the second-generation pre-facelift Audi R8 V10 and V10 Plus Coupe (Type 4S). A sculpted left-and-right pair for the lower front corners that visually widens the front stance with a sharp, track-inspired detail — mounted with adhesive backing and no drilling required.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65 kg for the complete pair — virtually no impact on front-end weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 44 x 23 x 2 cm per piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Front Stance:\u003c\/strong\u003e Canards visually widen the front end for a more purposeful look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Detail:\u003c\/strong\u003e Sharp motorsport-influenced profile at the lower front corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Dry carbon construction adds visual impact with virtually no weight penalty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Adhesive fitment requires no drilling or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2016–2018 Audi R8 V10 Plus Coupe (Gen 2 \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation pre-facelift R8 (Type 4S) Coupe factory front bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), the Gen 2 facelift (2019–2023), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Dry Carbon Fiber Front Bumper Canards (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive installation using the included tape — no drilling or permanent modification required, and fully reversible. Thoroughly clean, degrease, and dry the bumper surface at the intended canard positions first for maximum adhesion. The canards are handed, so confirm correct left\/right orientation before fitting. Professional installation is recommended for the best positioning, symmetry, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect both canards and confirm the carbon weave, finish, and fitment before installation. These canards are backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556711212,"sku":"1600825267877","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_dc7ee7eb-1291-4406-9123-b8abdd8a02f4.jpg?v=1789519240"},{"product_id":"2019-2023-audi-r8-v10-coupe-m-style-high-rear-wing-spoiler-dry-carbon-fiber","title":"2019–2023 Audi R8 V10 Coupe M-Style High Rear Wing Spoiler – Dry Carbon Fiber","description":"\u003ch2\u003e2019–2023 Audi R8 V10 Coupe M-Style High Rear Wing Spoiler – Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eDry carbon fiber high-rise rear wing for the second-generation facelift Audi R8 V10 Coupe (Type 4S). A bold M-style profile that lifts the rear deck silhouette well beyond the factory ducktail, engineered for a seamless OEM-style fit on the factory trunk lid.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Dry carbon fiber for a superior strength-to-weight ratio and refined weave consistency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC milling, and autoclave curing for consistent quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Single-deck, high-rise wing profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e CE \u0026amp; RoHS certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBold High-Rise Profile:\u003c\/strong\u003e Dramatically sharpens the rear-end stance beyond the factory ducktail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Motorsport-influenced wing design completes the R8 silhouette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Dry carbon construction delivers a dominant visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Precision-molded to sit flush on the factory trunk lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 GT Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation facelift R8 (Type 4S) Coupe factory trunk lid only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Dry Carbon Fiber High Rear Wing Spoiler\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAdhesive tape is supplied for installation. Thoroughly clean, degrease, and dry the trunk lid surface first for maximum adhesion, and ensure the wing is centered and symmetrically aligned before final fitment. \u003cstrong\u003eImportant:\u003c\/strong\u003e for a high-rise wing, screw-mount reinforcement in addition to the adhesive tape is strongly recommended for sustained high-speed driving. Professional installation is recommended for correct positioning, secure mounting, and finish quality.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the wing and confirm the carbon weave, finish, and fitment before installation. This wing is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556743980,"sku":"1601026803117","price":1989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_88200ed3-c72f-4df6-8ecb-e5bcdccd7db6.jpg?v=1789519240"},{"product_id":"audi-r8-v10-coupe-4s-gen-2-facelift-prepreg-dry-carbon-fiber-rear-bumper-fins-canards-2019-2023","title":"Audi R8 V10 Coupe 4S Gen 2 Facelift Prepreg Dry Carbon Fiber Rear Bumper Fins Canards 2019 - 2023","description":"\u003cp\u003e\nAdd a sharp, track-inspired aerodynamic detail to the rear bumper of your Audi R8 V10 Coupe Gen 2 Facelift with these premium prepreg dry carbon fiber rear bumper fins canards, precision manufactured using a 3D design and CNC moulding process with full autoclave curing. Supplied as a pair and designed specifically for the second generation facelift R8 V10 Coupe factory rear bumper, these rear fins introduce a purposeful aerodynamic visual element to the lower rear bumper corners — visually widening the rear stance and delivering a more aggressive, motorsport-inspired rear-end presence. Prepreg dry carbon fiber construction offers the highest tier of carbon material quality, with pre-impregnated resin systems delivering optimal fiber-to-resin ratios, superior strength-to-weight performance, and the most refined weave consistency available. The high-gloss epoxy polished surface in carbon black maintains the deep gloss prepreg dry carbon finish over long-term outdoor and driving exposure. Flexible installation with adhesive tape or mounting screws for a clean, secure fit.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePremium prepreg dry carbon fiber construction – the highest tier of carbon material quality, with pre-impregnated resin systems delivering optimal fiber-to-resin ratios and superior structural integrity\u003c\/li\u003e\n\u003cli\u003eAutoclave cured manufacturing – using 3D design, CNC moulding, and vacuum molding for the most refined weave consistency available in carbon fiber bodywork\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy polished surface finish in carbon black – maintains the deep gloss prepreg dry carbon appearance over sustained outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired rear bumper fins canard profile – adds a sharp, track-inspired aerodynamic visual element to the lower rear bumper corners of the R8 V10 Coupe\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair (Left \u0026amp; Right) for a complete and symmetrical rear fins installation\u003c\/li\u003e\n\u003cli\u003ePrecision-molded fitment – engineered specifically for the second generation facelift Audi R8 V10 Coupe factory rear bumper for a seamless OEM-style integration\u003c\/li\u003e\n\u003cli\u003eFlexible installation options – adhesive tape or mounting screws supported for a clean, secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Rear Bumper Fins \/ Splitter Canards\u003c\/li\u003e\n\u003cli\u003eDeck Configuration: Double Deck\u003c\/li\u003e\n\u003cli\u003eMaterial: Prepreg Dry Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eColor: Carbon Black\u003c\/li\u003e\n\u003cli\u003eSurface Finish: High-Gloss Epoxy Polished\u003c\/li\u003e\n\u003cli\u003eManufacturing Process: 3D Design · CNC Moulding · Vacuum Molding · Autoclave Cured\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces per set (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eInstallation Method: Adhesive Tape or Mounting Screws\u003c\/li\u003e\n\u003cli\u003ePosition: Rear Bumper\u003c\/li\u003e\n\u003cli\u003eFitment: Audi R8 V10 Coupe Gen 2 Facelift (4S) Factory Rear Bumper Only\u003c\/li\u003e\n\u003cli\u003ePurpose: Retrofit \/ Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eFitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi R8 V10 Coupe Gen 2 Facelift \/ 4S (2019 – 2023)\u003c\/li\u003e\n\u003cli\u003eAudi R8 V10 Performance Coupe Gen 2 Facelift \/ 4S (2019 – 2023)\u003c\/li\u003e\n\u003cli\u003eAudi R8 V10 GT Coupe Gen 2 Facelift \/ 4S (2022 – 2023)\u003c\/li\u003e\n\u003cli\u003eCompatible with second generation facelift R8 (Type 4S) Coupe factory rear bumper only – not compatible with first generation R8 (Type 42, 2008-2015), pre-facelift Gen 2 (2016-2018), Spyder, or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eCoupe 2-door body style only – confirm body style, engine variant, and generation before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e2x Prepreg Dry Carbon Fiber Rear Bumper Fins Canards (Left \u0026amp; Right)\u003c\/li\u003e\n\u003cli\u003eAdhesive Tape for installation included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eBenefits:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003ePrepreg dry carbon fiber represents the pinnacle of carbon material quality – the same material grade used in Formula 1, aerospace, and OEM supercar bodywork applications\u003c\/li\u003e\n\u003cli\u003ePre-impregnated resin systems deliver optimal fiber-to-resin ratios for superior strength, stiffness, and weight savings compared to wet carbon or standard dry carbon alternatives\u003c\/li\u003e\n\u003cli\u003eHigh-gloss epoxy finish maintains the premium prepreg dry carbon surface appearance over prolonged outdoor and driving exposure without fading or yellowing\u003c\/li\u003e\n\u003cli\u003eSport-inspired fins canard profile visually widens the rear stance of the R8 Gen 2 Facelift Coupe for a more aggressive, track-inspired rear-end presence\u003c\/li\u003e\n\u003cli\u003eLightweight prepreg construction adds a meaningful visual upgrade with the lowest possible weight impact – critical for a performance-oriented supercar\u003c\/li\u003e\n\u003cli\u003eFlexible installation options – choose between adhesive tape for a reversible fit or mounting screws for a more permanent, secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eInstallation Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesive tape supplied – thoroughly clean, degrease, and dry the factory rear bumper surface at the intended fin positions before installation to ensure maximum adhesion strength\u003c\/li\u003e\n\u003cli\u003eMounting screw installation available for a more permanent, secure fit – professional installation recommended if using screw fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with second generation facelift R8 (Type 4S) Coupe factory rear bumper only – will not fit first generation R8 (Type 42, 2008-2015), pre-facelift Gen 2 (2016-2018), Spyder, or aftermarket configurations\u003c\/li\u003e\n\u003cli\u003eEnsure correct left and right orientation before fitting – rear fins canards are handed and must be installed on the correct side\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended for optimal fin positioning, symmetrical alignment, and finish quality\u003c\/li\u003e\n\u003cli\u003eIf unsure about compatibility with your specific R8 variant or generation, contact our team with your year, model, engine variant, and chassis code (Type 42 \/ Type 4S Pre-Facelift \/ Type 4S Facelift) before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eShipping Information:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing Time:\u003c\/strong\u003e 2-5 business days for warehouse stock items\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade-to-Order:\u003c\/strong\u003e Please allow 2-4 weeks for shipping if product requires custom manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074556809516,"sku":"1600993834694","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/H1977afcb968b47d2900a78455626f64ej.webp?v=1789519240"},{"product_id":"2019-2023-audi-r8-v10-coupe-rear-bumper-diffuser-lip-prepreg-dry-carbon-fiber","title":"2019–2023 Audi R8 V10 Coupe Rear Bumper Diffuser Lip – Prepreg Dry Carbon Fiber","description":"\u003ch2\u003e2019–2023 Audi R8 V10 Coupe Rear Bumper Diffuser Lip – Prepreg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePrepreg dry carbon fiber rear bumper diffuser lip for the second-generation facelift Audi R8 V10 Coupe (Type 4S). A double-deck, sport-inspired profile that visually widens and lowers the rear stance, engineered for a seamless OEM-style fit with flexible adhesive or screw mounting.\u003c\/p\u003e\n\u003ch3\u003eBuild\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Prepreg dry carbon fiber with an optimal fiber-to-resin ratio for a strong, lightweight build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3D design, CNC moulding, and autoclave curing for consistent weave quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss epoxy polished surface in carbon black that resists fading and yellowing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Double-deck diffuser lip profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Precision-molded for the factory rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign \u0026amp; Aerodynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Rear Stance:\u003c\/strong\u003e Sport-inspired profile visually widens and lowers the rear end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Inspired Presence:\u003c\/strong\u003e Diffuser styling adds a purposeful, motorsport-influenced look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e Prepreg construction delivers a bold visual upgrade with minimal weight impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Designed to sit flush against the factory rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2019–2023 Audi R8 V10 Performance Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003cli\u003e2022–2023 Audi R8 V10 GT Coupe (Gen 2 Facelift \/ Type 4S)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits the second-generation facelift R8 (Type 4S) Coupe factory rear bumper only. Not compatible with the first-generation R8 (Type 42, 2008–2015), pre-facelift Gen 2 (2016–2018), Spyder, or aftermarket configurations. Coupe 2-door body style only — please confirm your body style, engine variant, and chassis code before ordering.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Prepreg Dry Carbon Fiber Rear Bumper Diffuser Lip\u003c\/li\u003e\n\u003cli\u003eAdhesive tape for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFlexible installation using the included adhesive tape for a clean, reversible fit, or mounting screws for a more permanent, secure hold. Thoroughly clean, degrease, and dry the bumper surface first for maximum adhesion, and ensure the diffuser is centered and symmetrically aligned before final fitment. Professional installation is recommended — especially for screw fitment — for the best positioning, panel gaps, and finish.\u003c\/p\u003e\n\u003ch3\u003eBefore You Install\u003c\/h3\u003e\n\u003cp\u003ePlease inspect the diffuser and confirm the carbon weave, finish, and fitment before installation. This diffuser is backed by a 12-month warranty from the date of purchase. If you have a fitment question, contact us with your year, model, and chassis code and we'll help confirm compatibility.\u003c\/p\u003e","brand":"K2 Industries","offers":[{"title":"Default Title","offer_id":54074557399340,"sku":"1600961399600","price":2099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1_485a5492-33c1-4d3e-b534-ee6d88c9a38c.jpg?v=1789519241"},{"product_id":"vw-audi-1-8t-20v-to-2-0-tfsi-r8-coilpack-adapter-plate-set-billet-aluminum-frosted-silver-for-a3-s3-a4-a6-tt-mk1-golf-mk4-gti-jetta-beetle-passat-1996-2011","title":"VW \/ Audi 1.8T 20V to 2.0 TFSI \/ R8 Coilpack Adapter Plate Set Billet Aluminum (Frosted Silver) for A3 \/ S3 \/ A4 \/ A6 \/ TT MK1 \/ Golf MK4 \/ GTI \/ Jetta \/ Beetle \/ Passat 1996 - 2011","description":"\u003cp\u003e\nUpgrade your 1.8T 20V coilpacks to the newer 2.0 TFSI \/ R8 coilpacks with this in-house CNC machined billet aluminum adapter plate set. The adapters bolt down to the factory 20V 1.8T valve cover allowing you to run the longer coilpacks found on 2.0T FSI, TSI, and R8 engines. Upgrading to FSI \/ R8 coilpacks allows you to run a larger spark plug gap while maintaining strong spark output, with proven benefits including longer coilpack life, smoother idle, increased off-boost power, and in some cases improved fuel economy.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAllows upgrade to newer 2.0 TFSI VW \/ Audi coilpacks\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined billet aluminum adapters\u003c\/li\u003e\n\u003cli\u003eLooks great in your engine bay\u003c\/li\u003e\n\u003cli\u003eDirect fit for all 1.8T 20V engines\u003c\/li\u003e\n\u003cli\u003eComplete set with stainless steel bolts\u003c\/li\u003e\n\u003cli\u003eFrosted silver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWhy Upgrade Your 1.8T Coilpacks to 2.0 TFSI:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLonger coilpack life\u003c\/li\u003e\n\u003cli\u003eSmoother idle\u003c\/li\u003e\n\u003cli\u003eIncreased off-boost power\u003c\/li\u003e\n\u003cli\u003eImproved fuel economy in some cases\u003c\/li\u003e\n\u003cli\u003eLarger spark plug gap capability while maintaining strong spark output\u003c\/li\u003e\n\u003cli\u003eIncreased reliability with newer coilpack technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Coilpack Adapter Plate Set\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC Machined\u003c\/li\u003e\n\u003cli\u003eSurface Finish: Frosted Silver\u003c\/li\u003e\n\u003cli\u003eHardware: Stainless Steel Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eAudi Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 B5 \/ B5.5 1.8T 20V (1996 – 2001)\u003c\/li\u003e\n\u003cli\u003eAudi A4 B6 1.8T 20V (2002 – 2005)\u003c\/li\u003e\n\u003cli\u003eAudi A6 C5 1.8T 20V (1998 – 2004)\u003c\/li\u003e\n\u003cli\u003eAudi A6 Allroad C5 1.8T 20V (1998 – 2004)\u003c\/li\u003e\n\u003cli\u003eAudi TT MK1 8N 1.8T 20V (2000 – 2006)\u003c\/li\u003e\n\u003cli\u003eAudi A3 MK1 8L 1.8T 20V (1996 – 2003)\u003c\/li\u003e\n\u003cli\u003eAudi S3 MK1 8L 1.8T 20V (1996 – 2003)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eVolkswagen Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW GTI MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW Jetta \u0026amp; Jetta GLI MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW Beetle 1C \/ 9C \/ 1Y 1.8T 20V (1998 – 2011)\u003c\/li\u003e\n\u003cli\u003eVW Passat B5 \/ B5.5 1.8T 20V (1998 – 2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation instructions are not included – professional installation is highly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e4x Adapter Plates\u003c\/li\u003e\n\u003cli\u003e10x Stainless Steel Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Silver","offer_id":54074563232044,"sku":"1005006305218865-Silver","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":54074563264812,"sku":"1005006305218865-Blue","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54074563297580,"sku":"1005006305218865-black","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":54074563330348,"sku":"1005006305218865-Red","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/S83866bc489d54cfb9996237e48bb8b2ff.webp?v=1789519389"},{"product_id":"vw-audi-1-8t-20v-to-2-0-tfsi-r8-coilpack-adapter-plate-set-billet-aluminum-silver-for-a3-s3-a4-a6-tt-mk1-golf-mk4-gti-jetta-beetle-passat-1996-2011","title":"VW \/ Audi 1.8T 20V to 2.0 TFSI \/ R8 Coilpack Adapter Plate Set Billet Aluminum (Silver) for A3 \/ S3 \/ A4 \/ A6 \/ TT MK1 \/ Golf MK4 \/ GTI \/ Jetta \/ Beetle \/ Passat 1996 - 2011","description":"\u003cp\u003e\nUpgrade your 1.8T 20V coilpacks to the newer 2.0 TFSI \/ R8 coilpacks with this in-house CNC machined billet aluminum adapter plate set. The adapters bolt down to the factory 20V 1.8T valve cover allowing you to run the longer coilpacks found on 2.0T FSI, TSI, and R8 engines. Upgrading to FSI \/ R8 coilpacks allows you to run a larger spark plug gap while maintaining strong spark output, with proven benefits including longer coilpack life, smoother idle, increased off-boost power, and in some cases improved fuel economy.\n\u003c\/p\u003e\n\n\u003ch6\u003eFeatures:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAllows upgrade to newer 2.0 TFSI VW \/ Audi coilpacks\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined billet aluminum adapters\u003c\/li\u003e\n\u003cli\u003eLooks great in your engine bay\u003c\/li\u003e\n\u003cli\u003eDirect fit for all 1.8T 20V engines\u003c\/li\u003e\n\u003cli\u003eComplete set with stainless steel bolts\u003c\/li\u003e\n\u003cli\u003eSilver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWhy Upgrade Your 1.8T Coilpacks to 2.0 TFSI:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLonger coilpack life\u003c\/li\u003e\n\u003cli\u003eSmoother idle\u003c\/li\u003e\n\u003cli\u003eIncreased off-boost power\u003c\/li\u003e\n\u003cli\u003eImproved fuel economy in some cases\u003c\/li\u003e\n\u003cli\u003eLarger spark plug gap capability while maintaining strong spark output\u003c\/li\u003e\n\u003cli\u003eIncreased reliability with newer coilpack technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eSpecifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003c\/li\u003e\n\u003cli\u003eType: Coilpack Adapter Plate Set\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC Machined\u003c\/li\u003e\n\u003cli\u003eColor: Silver\u003c\/li\u003e\n\u003cli\u003eHardware: Stainless Steel Bolts\u003c\/li\u003e\n\u003cli\u003eItem Dimensions: 13 x 12 x 8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eAudi Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A4 B5 \/ B5.5 1.8T 20V (1996 – 2001)\u003c\/li\u003e\n\u003cli\u003eAudi A4 B6 1.8T 20V (2002 – 2005)\u003c\/li\u003e\n\u003cli\u003eAudi A6 C5 1.8T 20V (1998 – 2004)\u003c\/li\u003e\n\u003cli\u003eAudi A6 Allroad C5 1.8T 20V (1998 – 2004)\u003c\/li\u003e\n\u003cli\u003eAudi TT MK1 8N 1.8T 20V (2000 – 2006)\u003c\/li\u003e\n\u003cli\u003eAudi A3 MK1 8L 1.8T 20V (1996 – 2003)\u003c\/li\u003e\n\u003cli\u003eAudi S3 MK1 8L 1.8T 20V (1996 – 2003)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eVolkswagen Fitment:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW GTI MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW Jetta \u0026amp; Jetta GLI MK4 1.8T 20V (1999 – 2005)\u003c\/li\u003e\n\u003cli\u003eVW Beetle 1C \/ 9C \/ 1Y 1.8T 20V (1998 – 2011)\u003c\/li\u003e\n\u003cli\u003eVW Passat B5 \/ B5.5 1.8T 20V (1998 – 2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eImportant Notes:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation instructions are not included – professional installation is highly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eContents:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e4x Adapter Plates\u003c\/li\u003e\n\u003cli\u003e10x Stainless Steel Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch6\u003eWarranty:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e12-month standard warranty from date of purchase\u003c\/li\u003e\n\u003cli\u003eContact our support team for assistance with any issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K2 Industries","offers":[{"title":"Silver","offer_id":54074564509996,"sku":"1005010206732860-Silver","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":54074564542764,"sku":"1005010206732860-black","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Sa99aab73042f4065a7e1c852f6112e5bv.webp?v=1789519396"}],"url":"https:\/\/lee-mods.com\/collections\/audi-r8.oembed","provider":"Lee Mods inc.","version":"1.0","type":"link"}