{"title":"DV8 Offroad","description":"\u003cp\u003eShop DV8 Offroad lighting, protection, mounts and vehicle-specific accessories available from Lee Mods. Verify vehicle fitment before ordering.\u003c\/p\u003e","products":[{"product_id":"elite-white-amber-push-button-dome-light","title":"Elite White\/Amber Push Button Dome Light","description":"\u003cp\u003eThe Elite White\/Amber Push Button Dome Light offers two colors and three brightness modes from a single push button. The dome light switches between clear and amber light and steps through low, medium, and high brightness. A sealed aluminum housing carries an IP67 rating and Deutsch waterproof plugs, so this dual color dome light stands up to water and dust. The UNWH-03 Wiring Harness runs a single dome light, and the UNWH-01 and UNWH-02 Wiring Harnesses run up to four lights. The DV8 Elite Dome Light works for interior cabin, outdoor scene, and rock lighting, or mounts on a roof rack. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual color white and amber LED dome light with single push button control \u003c\/li\u003e\n\u003cli\u003eWhite output: 423 \/ 273 \/ 192 lumens (high \/ medium \/ low) \u003c\/li\u003e\n\u003cli\u003eAmber output: 283 \/ 184 \/ 130 lumens (high \/ medium \/ low) \u003c\/li\u003e\n\u003cli\u003eWattage: 5.3W \/ 3.5W \/ 2.7W (high \/ medium \/ low) \u003c\/li\u003e\n\u003cli\u003e3 LEDs per color \u003c\/li\u003e\n\u003cli\u003eAmber mode preserves night vision \u0026amp; cuts through dust in exterior applications \u003c\/li\u003e\n\u003cli\u003eIP67 rated with Deutsch waterproof plugs for water and dust resistance \u003c\/li\u003e\n\u003cli\u003eAluminum housing with a micro texture finish \u003c\/li\u003e\n\u003cli\u003eBolt-on installation \u003c\/li\u003e\n\u003cli\u003eUniversal fitment for interior, scene light, rock light, and roof rack use \u003c\/li\u003e\n\u003cli\u003eWorks with DV8 UNWH Wiring Harnesses, sold separately (UNWH-03 for a single light, UNWH-1 with UNWH-02 for up to four lights) \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Mixed\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040169906476,"sku":"BE1EDM-A","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/BE1EDM-A-elite-white-amber-push-button-dome-light-Offtruck-2.jpg?v=1789105270"},{"product_id":"elite-white-push-button-dome-light","title":"Elite White Push Button Dome Light","description":"\u003cp\u003eThe Elite White Push Button Dome Light puts out bright white light across three brightness modes from a single push button, bright enough to flood the cabin on the highest setting or drop to low when less light is needed. A sealed aluminum housing carries an IP67 rating and Deutsch waterproof plugs, so this off road utility light stands up to water and dust. The UNWH-03 Wiring Harness runs a single dome light, and the UNWH-01 and UNWH-02 Wiring Harnesses run up to four lights. The DV8 Elite Dome Light works for interior cabin, outdoor scene, and rock lighting, or mounts on a roof rack. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBright white LED dome light with single push button control \u003c\/li\u003e\n\u003cli\u003eThree brightness modes (hold the button to cycle high, medium, and low) \u003c\/li\u003e\n\u003cli\u003eWhite output: 623 \/ 425 \/ 217 lumens (high \/ medium \/ low) \u003c\/li\u003e\n\u003cli\u003eWattage: 6.2W \/ 4.2W \/ 2.2W (high \/ medium \/ low) \u003c\/li\u003e\n\u003cli\u003e3 white LEDs \u003c\/li\u003e\n\u003cli\u003eIP67 rated with Deutsch waterproof plugs for water and dust resistance \u003c\/li\u003e\n\u003cli\u003eAluminum housing with a micro texture finish \u003c\/li\u003e\n\u003cli\u003eBolt on installation, no cutting or drilling \u003c\/li\u003e\n\u003cli\u003eUniversal fitment for interior, scene light, and rock light use \u003c\/li\u003e\n\u003cli\u003ePart of the DV8 Elite Series lighting lineup \u003c\/li\u003e\n\u003cli\u003eWorks with DV8 UNWH Wiring Harnesses, sold separately (UNWH-03 for a single light, UNWH-1 with UNWH-02 for up to four lights) \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Mixed\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040176329004,"sku":"BE1EDM-W","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/BE1EDM-W-elite-white-push-button-dome-light-Offtruck-4.jpg?v=1789105270"},{"product_id":"2023-ford-f-250-f-350-acc-relocation-bracket","title":"2023+ Ford F-250\/F-350 | ACC Relocation Bracket","description":"\u003cp\u003eThe 2023+ Ford Super Duty F-250\/F-350 ACC Relocation Bracket moves the factory radar module behind the grille so you keep adaptive cruise control and Pre-Collision Assist after installing an aftermarket front bumper. The bracket fits most aftermarket bumpers, including DV8's 2023+ Ford F-250\/350 Spec Series Front Bumper. Minor drilling is required for installation. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRetains factory adaptive cruise control and Pre-Collision Assist after an aftermarket front bumper install \u003c\/li\u003e\n\u003cli\u003ePositions the sensor to help prevent dashboard errors \u003c\/li\u003e\n\u003cli\u003eFits most aftermarket bumper brands \u003c\/li\u003e\n\u003cli\u003eFormed from 3.5mm steel with a micro texture finish for corrosion resistance \u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware \u003c\/li\u003e\n\u003cli\u003eInstalls in about 2.5 hours with only minor drilling, no cutting or welding \u003c\/li\u003e\n\u003cli\u003eFits 2023 and newer Ford Super Duty F-250, F-350, and F-450 models with factory adaptive cruise control \u003c\/li\u003e\n\u003cli\u003eFits ACC equipped models only \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 2.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2023–2026 Ford F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003e2023–2026 Ford F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003e2023–2026 Ford F-450 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040193106220,"sku":"ABFF-03","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/ABBR-03-F250-F350-F450-adaptive-cruise-control-bracket-Offtruck-1.jpg?v=1789105271"},{"product_id":"universal-molle-adjustable-antenna-whip-mount","title":"Universal Molle Adjustable Antenna \u0026 Whip Mount","description":"\u003cp\u003eOur Molle Mount secures to our molle panels for attaching antennas, whip flags, lights, and other accessories. The mount features a highly adjustable design that can be configured in 13 different positions. Our molle mount accepts 1\/2-inch diameter bolts that are a minimum of 1-inch long, so you don’t require an insert for securing your accessories. The mount includes a specifically designed insert that accommodates standard 1\/4-inch fiberglass whips. Our mount is made from aluminum and finished in a gloss black coating with a gloss red mounting plate. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSecurely Mounts Antennas, Whips, Lights, \u0026amp; Other Accessories \u003c\/li\u003e\n\u003cli\u003e13 Positions Available for an Adjustable Design \u003c\/li\u003e\n\u003cli\u003eAccepts 1\/2“ Diameter Bolts (Minimum 1” Long) Without Requiring an Insert \u003c\/li\u003e\n\u003cli\u003eInsert Designed to Accommodate Standard 1\/4“ Fiberglass Whips \u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Aluminum Construction \u003c\/li\u003e\n\u003cli\u003eGloss Black Finish w\/ Gloss Red Mounting Plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment Notes: Bolt-On\u003c\/li\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): .5 hrs\u003c\/li\u003e\n\u003cli\u003eProduct Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Satin Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040205754668,"sku":"UNMM-02","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/UNMM-02-universal-molle-antenna-whip-mount-36.jpg?v=1789105271"},{"product_id":"hpag-dv8-rbtt2-05","title":"2022-2026 Toyota Tundra Spec Series Rear Bumper","description":"\u003cp\u003eOur Rear Bumper provides a mid-width construction that offers rear-end protection, and it offers two 3\/4-inch D-ring mounts. A pair of integrated 3-inch pod light mounts allow for enhanced visibility. Our bumper is made from steel that is finished in a micro-texture black powder coat. The bumper retains the factory sensors and blind spot monitoring, as well as the factory license plate and reverse lights. Our bumper is fully bolt-on for a straightforward install process, and the welded-in zip tie tabs allow for clean wire management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSleek Mid-Width Design\u003c\/li\u003e\n\u003cli\u003e(2) 3\/4“ D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003ePair of 3” Pod Light Mounts\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensors and Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Factory License Plate and Reverse Lights\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Design\u003c\/li\u003e\n\u003cli\u003eOEM Hitch Required for Installation\u003c\/li\u003e\n\u003cli\u003eDurable Steel Design\u003c\/li\u003e\n\u003cli\u003eResilient Micro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment notes:\u003c\/strong\u003e Bolt-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation level:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation time:\u003c\/strong\u003e 3.5 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/texture:\u003c\/strong\u003e Micro Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty unit:\u003c\/strong\u003e YR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e CN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping lead time:\u003c\/strong\u003e 1 Day\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/RBTT2-05_Installation_Guide_Final.pdf?v=1784316626\" target=\"_blank\" rel=\"noopener\"\u003eInstallation guide\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040373854508,"sku":"RBTT2-05","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/RBTT2-05-tundra-spec-series-rear-bumper-5.jpg?v=1789105681"},{"product_id":"hpag-dv8-abbr-05","title":"2021-2026 Ford Bronco \u0026 Bronco Raptor Tube Front Bumper Camera Relocation Bracket","description":"\u003cp\u003eOur Camera Relocation Bracket allows you to retain usability of your front camera when running the push bar on our Bronco Tube Front Bumpers, as well as 360 view. The bracket includes an extended camera optical cable, and the spray hose line can be used to clean up a dusty or muddy lens. You can adjust the bracket to retain compatibility with different light setups. Our bracket is made from steel finished in a micro-texture black powder coat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelocates Front Camera for Full Visibility w\/ Tube Front Bumper\u003c\/li\u003e\n\u003cli\u003eCorrects 360 View when Running the Push Bar\u003c\/li\u003e\n\u003cli\u003eOnly Compatible w\/ DV8 Bronco Tube Bumpers\u003c\/li\u003e\n\u003cli\u003eIncludes Extended Camera Optical Cable\u003c\/li\u003e\n\u003cli\u003eSpray Hose Line Can Be Used to Clean a Dusty or Muddy Lens\u003c\/li\u003e\n\u003cli\u003eAdjustable for Different Light Setups\u003c\/li\u003e\n\u003cli\u003eDurable Steel Design\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1.5 hrs\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040374378796,"sku":"ABBR-05","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/ABBR-05-ford-bronco-tube-front-bumper-camer-relocation-bracket.jpg?v=1789105680"},{"product_id":"hpag-dv8-rrlb-01l","title":"Baja Designs Linkable Lightbar Mount for DV8 Roof Rack Light Option","description":"\u003cp\u003eOur Light Mount allows you to secure the Baja Designs XL Linkable Light Bar to the DV8 Spec Series Roof Racks with Light Option. The light mount is made from 5mm steel that is finished in a micro-texture black powder coat. Our light mount is straightforward to install with the included stainless hardware and fully bolt-on design.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAllows You to Mount the Baja Designs XL Linkable Light Bar Onto the DV8 Roof Rack Light Option \u003c\/li\u003e\n\u003cli\u003eDurable 5mm Steel Design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040375722284,"sku":"RRLB-01L","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Baja-Designs-Linkable-Lightbar-Mount-for-DV8-Roof-Rack-Light-Option-2.jpg?v=1789105682"},{"product_id":"hpag-dv8-fbff2-07","title":"2017-2022 Ford F-250\/350 Spec Series Front Bumper","description":"\u003cp\u003eOur Spec Series Front Bumper maximizes approach angles and improves clearance for oversized tires and wheels. The bumper features a low-profile winch mount and frame-mounted D-ring recovery points. Our bumper provides a center mount for running a 20-inch light bar while each wing features a pair of 3-inch pod light mounts. The bumper is compatible with our Bull Bar (LBUN-01). The bumper is made from steel that is finished in a black powder coat with satin black accent panels and an aluminum backed logo. The bumper retains the factory parking sensors, and trucks equipped with adaptive cruise control can retain full functionality with our ACC Relocation Bracket (ABFF-02). The welded-in zip tie tabs allow for clean wire management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Design for Maximizing Approach Angles \u0026amp; Clearance for Oversized Tires\u003c\/li\u003e\n\u003cli\u003eFrame-Mounted D-Ring Recovery Points\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Winch Mount That Fits Up to a 12,000lb Winch (Max Dims: 24.25”L x 10.52”H x 7.15”W)\u003c\/li\u003e\n\u003cli\u003eIntegrated 20” Center Light Bar Mount\u003c\/li\u003e\n\u003cli\u003e(2) 3” Pod Light Mounts Per Wing for a Total of 4 Mounts\u003c\/li\u003e\n\u003cli\u003eRetains Factory Parking Sensors in Equipped Vehicles\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs Allow for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish w\/ Satin Black Accents\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation w\/ Minor Trimming of Inner Fenders Required\u003c\/li\u003e\n\u003cli\u003eDoes Not Retain Factory Fog Lights\u003c\/li\u003e\n\u003cli\u003eRequires Adaptive Cruise Control Relocation Bracket (ABFF-02) for Equipped Vehicles\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Our Bull Bar (LBUN-01) For Added Lighting Options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2017–2022 Ford F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003e2017–2022 Ford F-350 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040377000236,"sku":"FBFF2-07","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2017-2022-ford-super-duty-spec-series-front-bumper.jpg?v=1789105681"},{"product_id":"hpag-dv8-fbcs2-04","title":"2024-2026 Chevy Silverado 2500\/3500 Spec Series Front Bumper","description":"\u003cp\u003eOur Spec Series Front Bumper provides improved clearance for larger tires and trail obstacles. The bumper provides frame-mounted recovery points for D-rings and a low-profile winch mount. It also offers one 20” light bar mount and a pair of 3” pod light mounts on each wing. The bumper provides welded-in zip tie tabs for clean wire management. Additionally, our bumper retains the OEM parking sensors and adaptive cruise control in equipped vehicles. Our bumper is made from steel and finished in a black powder coat with satin black accent panels and an aluminum-backed logo.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Design for Maximizing Approach Angles \u0026amp; Clearance for Oversized Tires\u003c\/li\u003e\n\u003cli\u003eFrame-Mounted D-Ring Recovery Points\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Winch Mount That Fits Up to a 12,000lb Winch (Max Dims: 24.25”L x 10.52”H x 7.15”W)\u003c\/li\u003e\n\u003cli\u003eIntegrated 20” Center Light Bar Mount\u003c\/li\u003e\n\u003cli\u003e(2) 3” Pod Light Mounts Per Wing for a Total of 4 Mounts\u003c\/li\u003e\n\u003cli\u003eRetains Factory Parking Sensors in Equipped Vehicles\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Factory Adaptive Cruise Control\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs Allow for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish w\/ Satin Black Accents\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation w\/ Minor Trimming of Inner Fenders Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2024–2026 Chevrolet Silverado 2500 HD\u003c\/li\u003e\n\u003cli\u003e2024–2026 Chevrolet Silverado 3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040377491756,"sku":"FBCS2-04","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2024-2026-Chevy-Silverado-2500-3500-Spec-Series-Front-Bumper-1.jpg?v=1789105682"},{"product_id":"hpag-dv8-fbff2-06","title":"2023-2026 Ford F-250\/350 Spec Series Front Bumper","description":"\u003cp\u003eThe 2023+ Ford F-250\/350 Spec Series Front Bumper combines aggressive styling with off-road functionality in a sleek, low-profile design that follows the factory body lines of the truck. It improves approach angles and clearance for oversized tires while providing integrated recovery and lighting capabilities. The bumper features frame-mounted D-ring mounts for added strength and includes a built-in winch mount that fits up to a 12,000 lb. winch. Integrated lighting options include mounts for a 20\" center light bar and up to four pod lights. Welded-in zip tie tabs help keep wiring clean and organized. Designed to retain factory front parking sensors on equipped models, the bumper is finished in a durable micro-texture black powder coat with satin black accent panels and an aluminum backed logo. Installation is fully bolt-on, though inner fender trimming is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMatches Factory Body Lines While Maximizing Approach Angles and Clearance for Oversized Tires\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts Bolt Directly to the Frame for Maximum Strength and Even Load Distribution\u003c\/li\u003e\n\u003cli\u003eFits up to 12,000 lb. Winch (Max Dims: 24.25”L x 10.52”H x 7.15”W) in a Sleek, Low Profile Mount\u003c\/li\u003e\n\u003cli\u003eBuilt-In Mounts for (4) Pod Lights and Accepts a 20\" Center Light Bar\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs Keep Your Winch and Lighting Wires Organized and Protected\u003c\/li\u003e\n\u003cli\u003eDesigned to Retain Your Factory Front Parking Sensors (if Equipped)\u003c\/li\u003e\n\u003cli\u003eProtected by a Micro-Texture Black Powder Coat, Featuring Satin Black Accent Panels and an Aluminum Backed Logo\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003cli\u003eInner Fender Requires Trimming for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 4\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2023–2026 Ford F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003e2023–2026 Ford F-350 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040379097388,"sku":"FBFF2-06","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2023-2026-Ford-Super-Duty-Spec-Series-Front-Bumper-1.jpg?v=1789105683"},{"product_id":"hpag-dv8-infend-08rb","title":"2021-2025 Ford Bronco Rear Inner Fenders","description":"\u003cp\u003eThe DV8 Offroad Rear Inner Fender Liners for the 6th Gen Ford Bronco add protection and a finished look to the rear wheel wells while maintaining clearance for larger tires and upgraded suspension systems. The lightweight aluminum construction features a satin black powder coat finish with raw paintable mesh accents for a customizable appearance. Designed to clear up to 37\" tires with a 2.5-3\" lift and accommodate remote reservoir shocks. Simple bolt-on installation with minor drilling required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder-Coat Finish with Raw Paintable Mesh Accents\u003c\/li\u003e\n\u003cli\u003eImproved \u0026amp; Simplified Design\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Design to Accept Factory or Aftermarket Suspensions\u003c\/li\u003e\n\u003cli\u003eCan Clear 37\" Tires with 2.5-3\" Lift\u003c\/li\u003e\n\u003cli\u003eCan Accept 35\" Tires with Factory Sasquatch or 2-3\" Lift if Non-Sasquatch\u003c\/li\u003e\n\u003cli\u003eDesigned to Accommodate Remote Reservoir Shocks\u003c\/li\u003e\n\u003cli\u003eDrilling Required for a Simple Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eNot Compatible with Bronco Raptor, Heritage, or Everglades Trims\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 2.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Satin Black Powder\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2025 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040379654444,"sku":"INFEND-08RB","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/6th-Gen-Bronco-Rear-Inner-Fenders-Main-Render.jpg?v=1789105683"},{"product_id":"hpag-dv8-fbcs2-03","title":"2020-2023 Chevy Silverado 2500\/3500 Spec Series Front Bumper","description":"\u003cp\u003eLow-profile Spec Series front bumper for the 2020-2023 Chevy Silverado 2500\/3500 with a design that follows factory body lines while adding strength and functionality. Features a center mount for a 20-inch light bar and dual 3-inch pod light mounts on each wing for expanded lighting options. Compatible with the optional Bull Bar (PN# LBUN-01) for additional lighting capability.Includes a built-in winch mount that supports up to a 12,000 lb winch within specified dimensions. D-ring mounts tie directly into the frame for added recovery strength. Retains factory parking sensors when equipped. Welded zip tie tabs help keep wiring clean and organized. Finished in a micro-texture black powder coat with satin black Spec Series accent panels and an aluminum-backed logo. Fully bolt-on installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged Yet Sleek Design Tailored to the Body Lines of the Truck\u003c\/li\u003e\n\u003cli\u003eFits a 20” Light Bar at the Center of the Bumper\u003c\/li\u003e\n\u003cli\u003eFits Dual 3” Pod Lights at the Wings of the Bumper (4 Total)\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts Mounted Directly to the Frame with Ties to the Bumper for Even Distribution and Added Strength\u003c\/li\u003e\n\u003cli\u003eDesigned to Accept Factory Parking Sensors if Equipped\u003c\/li\u003e\n\u003cli\u003eLow Profile Yet Still Built to Accept up to a 12,000lb Winch (24.25” x 10.52” x 7.15”)\u003c\/li\u003e\n\u003cli\u003eExpandable with our Bull Bar (PN# LBUN-01) that can mount a 13\" light bar.\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eAluminum Backed Logo\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Spec Series Accent Panels\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 4\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020–2023 Chevrolet Silverado 2500 HD\u003c\/li\u003e\n\u003cli\u003e2020–2023 Chevrolet Silverado 3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040380113196,"sku":"FBCS2-03","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2020-2023-Chevy-Silverado-HD-Spec-Series-Front-Bumper-1.jpg?v=1789105700"},{"product_id":"hpag-dv8-fbgc2-02","title":"2024-2026 GMC Sierra 2500\/3500 Spec Series Front Bumper","description":"\u003cp\u003eLow profile Spec Series front bumper designed to match the body lines of the GMC Sierra 2500 and 3500. Accepts a 20 inch light bar in the center and dual 3 inch pod lights in the wings.Built for strength with frame-mounted D-ring recovery points and a winch mount that fits most winches up to 12,000 lbs. Retains factory parking sensors on equipped models.Includes welded zip tie tabs for clean wire management, aluminum backed logo, and a durable micro-texture black powder coat finish with satin black accent panels. Direct bolt-on installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged Yet Sleek Design Tailored to the Body Lines of the Truck\u003c\/li\u003e\n\u003cli\u003eFits a 20” Light Bar at the Center of the Bumper\u003c\/li\u003e\n\u003cli\u003eFits Dual 3” Pod Lights at the Wings of the Bumper\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts Mounted Directly to the Frame with Ties to the Bumper for Even Distribution and Added Strength\u003c\/li\u003e\n\u003cli\u003eDesigned to Accept Factory Parking Sensors if Equipped\u003c\/li\u003e\n\u003cli\u003eLow Profile Yet Still Built to Accept up to a 12,000lb Winch (24.25” x 10.52” x 7.15”)\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eAluminum Backed Logo\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Spec Series Accent Panels\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 4\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2024–2026 GMC Sierra 2500 HD\u003c\/li\u003e\n\u003cli\u003e2024–2026 GMC Sierra 3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040380342572,"sku":"FBGC2-02","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2024-up-GMC-Sierra-HD-Spec-Series-Front-Bumper-1.jpg?v=1789105700"},{"product_id":"hpag-dv8-sptt1-11","title":"2024-2026 Toyota Tacoma Rear Differential Skid Plate","description":"\u003cp\u003eProtect your Tacoma’s rear differential from rocks and trail damage with this bolt-on skid plate. The pinion skid helps prevent hang-ups and reduces the risk of leaks caused by scraping and impact. Built with five mounting points for added strength, it also helps protect the axle housing and pumpkin from permanent damage. An integrated access hole allows for easy oil changes, while built-in drain holes prevent water and mud buildup. Finished in a micro-texture black powder coat with a paintable aluminum logo plate for a customizable look.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFive Mounting Points for Added Durability\u003c\/li\u003e\n\u003cli\u003ePrevents Rear Diff from Leaking from Rock Scrapes (the Pressure of the Rocks Scraping Will Pull on the Differential Cover Allowing Oil to Leak)\u003c\/li\u003e\n\u003cli\u003ePrevents Permanent Damage to the Rear Axle and Pumpkin\u003c\/li\u003e\n\u003cli\u003eFeatures an Access Hole to Drain Oil\u003c\/li\u003e\n\u003cli\u003eIncludes Drain Holes to Prevent Water\/Mud Build-Up\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum Logo Plate to Match Your Other Accessories\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2024–2026 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040381849900,"sku":"SPTT1-11","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/4th-gen-Tacoma-Rear-Diff-Skid-Plate-1.jpg?v=1789105703"},{"product_id":"hpag-dv8-fbdr2-05","title":"2019-2026 Ram 2500\/3500 Spec Series Front Bumper","description":"\u003cp\u003eLow-profile front bumper designed to match the body lines of the 2019–2026 Ram 2500\/3500. Accepts up to a 12,000 lb winch and features D-ring mounts tied directly to the frame for added strength. Retains factory parking sensors on equipped models. The center of the bumper features a light mount for 20” single or dual row light bars, and each wing can mount a single 3” light pod. Includes welded zip tie tabs for clean wire management. Finished in a micro-texture black powder coat with satin black Spec Series accent panels and an aluminum backed logo. Direct bolt-on installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged and Sleek Design Tailored to the Body Lines of the Truck\u003c\/li\u003e\n\u003cli\u003e20” Light Bar Mount at Center of Bumper\u003c\/li\u003e\n\u003cli\u003e(1) 3” Light Pod Mounts in Each Wing of the Bumper\u003c\/li\u003e\n\u003cli\u003e1\" Thick D-Ring Mounts Tie Directly to the Frame and Bumper for Even Distribution and Added Strength\u003c\/li\u003e\n\u003cli\u003eDesigned to Accept Factory Parking Sensors if Equipped\u003c\/li\u003e\n\u003cli\u003eLow Profile Design Able to Accept up to a 12,000lb Winch (24.25” L x 10.52” H x 7.15” W)\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eAluminum Backed Logo\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Spec Series Accent Panels\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2019–2026 Ram 2500\u003c\/li\u003e\n\u003cli\u003e2019–2026 Ram 3500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040381882668,"sku":"FBDR2-05","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2019-up-Ram-2500-3500-Spec-Series-Front-Bumper-1.jpg?v=1789105703"},{"product_id":"hpag-dv8-fbgc2-01","title":"2020-2023 GMC Sierra 2500\/3500 Spec Series Front Bumper","description":"\u003cp\u003eSpec Series Front Bumper for the GMC Sierra 2500\/3500 with a low-profile design that follows factory body lines while improving clearance for oversized tires and suspension upgrades. Features an integrated winch mount rated for up to a 12,000 lb winch and 1\" thick D-ring mounts that tie into both the bumper and frame for added recovery strength.Includes a center mount for a 20\" light bar behind the mesh panel and (4) 3\" pod light mounts in the wings. Compatible with an optional bull bar with additional lighting. Retains adaptive cruise control, parking sensors, and the factory front camera with minor wiring required.Constructed from steel with a micro-texture black powder coat and satin black accents. Welded zip-tie tabs provide clean wire management. Direct fit with a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged, sleek design that conforms to your truck’s body lines\u003c\/li\u003e\n\u003cli\u003e20” light bar mount set behind mesh accent panel\u003c\/li\u003e\n\u003cli\u003e(2) 3” pod light mounts per wing (4 total)\u003c\/li\u003e\n\u003cli\u003eLow-profile fitment for improved ground clearance\u003c\/li\u003e\n\u003cli\u003eIntegrated winch mount that can accept up to a 12,000lbs winch\u003c\/li\u003e\n\u003cli\u003eWinch mount dimensions: 24.25” x 10.52” x 7.15”\u003c\/li\u003e\n\u003cli\u003e(2) 1” thick D-ring mounts that bolt-on to the frame\u003c\/li\u003e\n\u003cli\u003eExpandable with our Bull Bar (PN# LBUN-01) for added utility\u003c\/li\u003e\n\u003cli\u003eRetains OEM front camera, but will partially obscure view if running the optional add-on bull bar\u003c\/li\u003e\n\u003cli\u003eCompatible with factory parking sensors and adaptive cruise control in equipped vehicles\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for clean wire management\u003c\/li\u003e\n\u003cli\u003eAluminum backed DV8 logo\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coated finish w\/ satin black accent panels\u003c\/li\u003e\n\u003cli\u003eDurable steel construction\u003c\/li\u003e\n\u003cli\u003eMinor wiring required for models equipped with parking sensors\u003c\/li\u003e\n\u003cli\u003eTrimming of inner fenders required for installation\u003c\/li\u003e\n\u003cli\u003eDoes not retain factory fog lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020–2023 GMC Sierra 2500 HD\u003c\/li\u003e\n\u003cli\u003e2020–2023 GMC Sierra 3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040382669100,"sku":"FBGC2-01","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2020-2023-GMC-Sierra-2500-3500-Spec-Series-Front-Bumper-Render.jpg?v=1789105703"},{"product_id":"hpag-dv8-mpjk-02","title":"2007-2018 Wrangler JK 4-Door Pocketed Rear Window Molle Panels","description":"\u003cp\u003ePocketed rear window molle panels for Jeep Wrangler JK. Provides additional interior storage with versatile mounting for molle bags, tools, radios, and other gear. Direct-fit design contours to the rear windows for a clean, integrated look. Multiple mounting points ensure a strong, rigid installation. Compatible with hardtop models only and does not require removal for hardtop removal. Bolt-on installation. Finished in a durable micro-texture black powder coat. Sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQuick and easy installation\u003c\/li\u003e\n\u003cli\u003eVersatile mounting options for molle bags, knives, radios, phones, holsters, medical kits, and more\u003c\/li\u003e\n\u003cli\u003eDirect-fit design contours to your vehicle for a sleek, finished look\u003c\/li\u003e\n\u003cli\u003eMultiple mounting points provide a strong, rigid fit\u003c\/li\u003e\n\u003cli\u003eCompatible with or without a hardtop; no need to remove molle panels for hardtop removal\u003c\/li\u003e\n\u003cli\u003eSold as a driver \u0026amp; passenger side pair\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for 4-door models only\u003c\/li\u003e\n\u003cli\u003eNot compatible with soft tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007–2018 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040383095084,"sku":"MPJK-02","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Jeep-Wrangler-JK-4-Door-Pocketed-Rear-Window-Molle-Panels-1.jpg?v=1789105704"},{"product_id":"hpag-dv8-spjk-12","title":"2007-2018 Jeep Wrangler JK Dana 44 Front Differential Skid Plate","description":"\u003cp\u003eDana 44 front differential skid plate for the Jeep Wrangler JK. Protects the front differential and pinion from rocks and trail impacts, helping prevent oil leaks and axle housing damage, and reduces hang-ups on obstacles.Features six mounting points for added strength and durability. Bolt-on installation with no drilling required. Includes a paintable aluminum logo plate for customization. Finished in a micro-texture black powder coat.Fits D44 front axles only. Not compatible with Dana 30 models or aftermarket differential covers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePinion skid plate helps prevent hangups on rocks and trail obstacles\u003c\/li\u003e\n\u003cli\u003eProtects the front differential from rock impacts that can cause oil leaks\u003c\/li\u003e\n\u003cli\u003eHelps prevent permanent damage to the axle housing\u003c\/li\u003e\n\u003cli\u003eSix mounting points for increased strength and durability during off-road use\u003c\/li\u003e\n\u003cli\u003ePaintable aluminum logo plate for easy customization to match your build\u003c\/li\u003e\n\u003cli\u003eCompatible with D44 front axles only (Rubicon)\u003c\/li\u003e\n\u003cli\u003eNot compatible with D30 front axles (Sport, Sahara, Willy’s)\u003c\/li\u003e\n\u003cli\u003eNot compatible with aftermarket differential covers\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007–2018 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040383389996,"sku":"SPJK-12","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Jeep-Wrangler-JK-Dana-44-Front-Differential-Skid-Plate-1.jpg?v=1789105705"},{"product_id":"hpag-dv8-fbff1-13","title":"2021-2023 Ford F-150 Tube Front Bumper","description":"\u003cp\u003eTube front bumper for the 2021-2023 F-150 featuring an ultra high-clearance prerunner design for improved off-road performance and reduced hang-ups. Includes a full skid plate for front-end protection and integrated high-strength recovery points.Supports multiple lighting options with a center mount for a 20\" light bar or up to (6) 3\" pods, plus side mounts for (1) pod per side. Optional push bar adds additional lighting capacity for a 20\" bar, (4) round lights, or up to (8) pods.Retains factory parking sensors. Built-in wire management with welded zip-tie tabs for clean installation. Finished in a micro-texture black powder coat with gray skid plate accents.Note: Optional push bar may obstruct front camera. ABFF-01 bracket required to retain adaptive cruise control on equipped models.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUltra high clearance prerunner design\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2023 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040383979820,"sku":"FBFF1-13","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2021-2023-Ford-F-150-Tube-Front-Bumper-1.jpg?v=1789105704"},{"product_id":"hpag-dv8-rbff1-06","title":"2021-2026 Ford F-150 Tube Rear Bumper","description":"\u003cp\u003eTube rear bumper for 2021-2026 Ford F-150 with a low-profile prerunner design that maintains a lightweight, clean look. Direct bolt-on installation with no cutting or drilling required. Includes (2) 3\" pod light mounts and welded zip-tie tabs for clean wire management. Retains OEM hitch, license plate lights, and is compatible with both 4 and 6 sensor configurations.Features CNC-cut logo end caps. Finished in a durable micro-texture black powder coat. Designed for single exhaust models only. Not compatible with dual exhaust or Raptor trim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated zip-tie tabs keep wiring clean and organized\u003c\/li\u003e\n\u003cli\u003eWorks with your OEM hitch, no changes needed\u003c\/li\u003e\n\u003cli\u003eCNC cut logo end caps\u003c\/li\u003e\n\u003cli\u003e(2) 3\" Pod Light Mounts\u003c\/li\u003e\n\u003cli\u003eDesigned for trucks with a single exhaust setup\u003c\/li\u003e\n\u003cli\u003eRetains factory license plate light\u003c\/li\u003e\n\u003cli\u003eWorks with 4 and 6 sensor models\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eDirect-fit with no cutting or drilling required\u003c\/li\u003e\n\u003cli\u003eNot compatible with dual exhaust or Raptor trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 4\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2026 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040384143660,"sku":"RBFF1-06","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2021-up-Ford-F-150-Tube-Rear-Bumper-1.jpg?v=1789105705"},{"product_id":"hpag-dv8-cmtf3-01","title":"2025-2026 Toyota 4Runner i-Force MAX Compressor Mount","description":"\u003cp\u003e2025-2026 Toyota 4Runner i-Force MAX Compressor Mount\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Hybrid i-Force MAX models only\u003c\/li\u003e\n\u003cli\u003eCompatible with Single or Dual, Brushed or Brushless ARB Compressors\u003c\/li\u003e\n\u003cli\u003eSecurely mounts your ARB compressor inside the rear cargo area away from the elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040386273580,"sku":"CMTF3-01","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/6th-Gen-4Runner-iForce-MAX-Air-Compressor-Mount-1.jpg?v=1789105747"},{"product_id":"hpag-dv8-fbcs3-04","title":"2023-2026 Chevy Colorado ZR2 Tube Front Bumper","description":"\u003cp\u003eHigh-clearance tube front bumper designed for the 2023-2026 Chevy Colorado ZR2, built for a balance of desert performance and rock crawling. Features a full skid plate system with prerunner-style gray accent plates for added front-end protection. The center light mount supports a 20” dual row light bar or up to (6) 3” pods, with additional side wing mounts for (1) 3” pod per side. An optional push bar adds expanded lighting options, including a 20” light bar, (4) 7” lights, or up to (8) 3” pods.\u003c\/p\u003e\u003cp\u003eIncludes integrated steel recovery points for reliable recovery use and welded zip-tie tabs for clean wire management. Finished in a durable micro-texture black powder coat with gray accent skid plates.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh profile sleek designed for a balance between desert and rock crawling.\u003c\/li\u003e\n\u003cli\u003eCenter light mount for either 20” dual row light bar or up to (6) 3” light pods\u003c\/li\u003e\n\u003cli\u003eSide wing light mount for a single 3” light pod on each side\u003c\/li\u003e\n\u003cli\u003eOptional push bar light mount for 20” light bar, (4) 7” lights, or up to (8) 3” light pods\u003c\/li\u003e\n\u003cli\u003ePrerunner style gray accent skid plates\u003c\/li\u003e\n\u003cli\u003eFull skid plate to offer offroad protection in the dirt and rocks.\u003c\/li\u003e\n\u003cli\u003eUltra high clearance design to prevent getting hung up on rocks.\u003c\/li\u003e\n\u003cli\u003eSolid steel recovery points included to prevent you from losing front recovery points like many tube bumpers do.\u003c\/li\u003e\n\u003cli\u003eWelded Zip-Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture black powder coat with gray accent skid plates.\u003c\/li\u003e\n\u003cli\u003eCutting required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 5\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 6.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2023–2026 Chevrolet Colorado\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040387322156,"sku":"FBCS3-04","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2023-up-Chevy-Colorado-ZR2-Tube-Front-Bumper-Studio-1.jpg?v=1789105748"},{"product_id":"hpag-dv8-rbcs3-04","title":"2023-2026 GMC Canyon \u0026 Chevy Colorado Tube Rear Bumper","description":"\u003cp\u003eTube rear bumper with a sleek prerunner-inspired design for GMC Canyon and Chevy Colorado. Lightweight, low-profile construction maintains factory styling while improving rear protection and clearance.\u003c\/p\u003e\u003cp\u003eIncludes mounts for (2) 3” pod lights and retains full functionality of factory hitch, license plate lights, parking sensors, and blind spot monitoring (if equipped). Features welded zip-tie tabs for clean wire management.\u003c\/p\u003e\u003cp\u003eDirect bolt-on installation with minor trimming required. Finished in a durable micro-texture black powder coat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSleek prerunner tube-inspired design\u003c\/li\u003e\n\u003cli\u003e2 (3”) pod light mounts\u003c\/li\u003e\n\u003cli\u003eLow profile lightweight construction that complements the factory look of the truck\u003c\/li\u003e\n\u003cli\u003eCompatible with factory hitch\u003c\/li\u003e\n\u003cli\u003eUtilizes factory license plate lights\u003c\/li\u003e\n\u003cli\u003eCompatible with parking sensors and BSM (if equipped)\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for clean wire management\u003c\/li\u003e\n\u003cli\u003eDirect fit\/bolt-on design\u003c\/li\u003e\n\u003cli\u003eMinor trimming required for installation\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2023–2026 Chevrolet Colorado\u003c\/li\u003e\n\u003cli\u003e2023–2026 GMC Canyon\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040387584300,"sku":"RBCS3-04","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2023-up-GMC-Canyon-and-Chevy-Colorado-Tube-Rear-Bumper-1.jpg?v=1789105748"},{"product_id":"hpag-dv8-fbfr1-01","title":"2017-2020 Ford F-150 Raptor Tube Front Bumper","description":"\u003cp\u003eThe DV8 Offroad Tube Front Bumper for the 2nd Gen Raptor combines a high-profile prerunner design with high clearance and a full skid plate for serious off-road protection. The central light mount accepts a 20\" dual row light bar or up to six 3\" pod lights, with additional 3\" pod mounts on each side for flexible lighting configurations. An optional prerunner-style push bar adds more mounting points and that classic desert truck look.\u003c\/p\u003e\u003cp\u003eThis bumper retains adaptive cruise compatibility with the DV8 Relocation Bracket (ABFF-02). Included solid steel recovery points to prevent you from losing front recovery options. Welded zip-tie tabs provide clean wire management throughout. Finished in micro-texture black powder coat with gray powder coated skid plates and panels, the bumper is a complete bolt-on installation with no cutting or welding required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh Profile Sleek Design Ideal To Give Your Raptor That Iconic Prerunner Look\u003c\/li\u003e\n\u003cli\u003eFull Skid Plate To Offer Offroad Protection In The Dirt And Rocks\u003c\/li\u003e\n\u003cli\u003eCentral Light Mount For 20” Dual Row, Or (6) 3” Pod Lights\u003c\/li\u003e\n\u003cli\u003eSide Light Mounts For a 3” Pod Light on Each Side\u003c\/li\u003e\n\u003cli\u003eUltra High Clearance Design To Prevent Getting Hung Up On Rocks, Ruts, Or Whoops\u003c\/li\u003e\n\u003cli\u003eMultiple Lighting Arrangements To Accept Many Variations Of Setups\u003c\/li\u003e\n\u003cli\u003ePrerunner Style Push Bar With Light Mounts Included (Optional)\u003c\/li\u003e\n\u003cli\u003eOptional Push Bar Partially Obstructs Front Camera\u003c\/li\u003e\n\u003cli\u003eIncluded Solid Steel Recovery Points\u003c\/li\u003e\n\u003cli\u003eRetains Adaptive Cruise With The Use Of Our Relocation Bracket (ABFF-02)\u003c\/li\u003e\n\u003cli\u003eWelded Zip-Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eGray Powder Coated Skid Plates And Panels\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003cli\u003eNo Raptor Tax!!!!\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2017–2020 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040390566188,"sku":"FBFR1-01","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2017-2020-Ford-F-150-Raptor-Tube-Front-Bumper-3.jpg?v=1789105751"},{"product_id":"hpag-dv8-spff1-01","title":"2015-2020 Ford F-150 \u0026 Raptor Front Differential Skid Plate","description":"\u003cp\u003eThe DV8 Offroad Front Differential Skid Plate is a direct replacement for the factory diff skid on 2015-2020 Ford F-150 and 2017-2020 Raptor models. Most aftermarket front bumpers require cutting or removing the stock skid plate, leaving the front differential unprotected. This skid plate solves that with a flush-mounting design that works alongside aftermarket bumper installations.\u003c\/p\u003e\u003cp\u003eBuilt from 4mm thick steel with a micro-texture black powder coat finish, it delivers solid front diff protection without sacrificing ground clearance. The low-profile design maintains maximum clearance, and built-in vents allow dirt and debris to wash out rather than build up over time. Straightforward bolt-on installation with no modification required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2015-2020 F-150s And The 2nd Gen 2017-2020 Raptor\u003c\/li\u003e\n\u003cli\u003e4mm Thick Skid Plate Specifically Designed To Protect The Front Diff\u003c\/li\u003e\n\u003cli\u003eMost Aftermarket Bumpers Require You To Cut The Factory Diff Skid, Ours Replaces It With A Flush Mounting Design\u003c\/li\u003e\n\u003cli\u003eVented For Dirt And Debris To Easily Wash Out\u003c\/li\u003e\n\u003cli\u003eLow Profile Design To Offer Maximum Clearance\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015–2020 Ford F-150\u003c\/li\u003e\n\u003cli\u003e2017–2020 Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040390795564,"sku":"SPFF1-01","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2015-2020-Ford-F-150-and-Raptor-Front-Differential-Skid-Plate-1.jpg?v=1789105751"},{"product_id":"hpag-dv8-fbfr-02","title":"2022+ Ford Bronco Raptor Tube Front Bumper","description":"\u003cp\u003eThe DV8 Offroad Tube Front Bumper for the Ford Bronco Raptor features a high-clearance prerunner-style design built for both high-speed desert driving and technical rock crawling. A full skid plate provides added protection from rocks and trail debris, while the tube construction helps maintain a lightweight yet durable front-end upgrade.\u003c\/p\u003e\u003cp\u003eThe integrated center light mount supports either a 20\" dual row light bar with two side 3\" pod lights, or six 3\" pod lights in center with two side 3” pods. An optional prerunner push bar adds additional lighting capability and can mount a 20\" light bar, four 7\" round lights, or eight 3\" pod lights. Solid steel recovery points maintain reliable front recovery capability when needed.\u003c\/p\u003e\u003cp\u003eAdditional features include welded zip-tie tabs for clean wire management, retention of factory parking sensors, and CNC logo end caps for added styling. The bumper is finished in a micro-texture black powder coat with gray accent skid plates and an orange “R” accent panel that complements the Bronco Raptor’s factory look.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh profile sleek design for a balance between high speed desert and rock crawling.\u003c\/li\u003e\n\u003cli\u003eFull skid plate to offer offroad protection in the dirt and rocks.\u003c\/li\u003e\n\u003cli\u003eUltra high clearance design to prevent getting hung up on rocks.\u003c\/li\u003e\n\u003cli\u003eCentral light mount takes a 20” dual row plus a pair of 3” pods, OR (6) 3” pods\u003c\/li\u003e\n\u003cli\u003eSide light mounts can take a 3” light pod on each side\u003c\/li\u003e\n\u003cli\u003ePrerunner style push bar with light mounting capabilities included (optional)\u003c\/li\u003e\n\u003cli\u003eIncluded solid steel recovery points to prevent you from losing front recovery options\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eRetains Factory Parking Sensors\u003c\/li\u003e\n\u003cli\u003eCNC logo in tube ends\u003c\/li\u003e\n\u003cli\u003eOrange \"R\" in front accent panel\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eGray powder coated skid plates to accent the bumper in an iconic prerunner style\u003c\/li\u003e\n\u003cli\u003eNeeds ACC Relocation Bracket (ABBR-01) to keep ACC compatibility\u003c\/li\u003e\n\u003cli\u003ePartially obstructs front camera. Relocation bracket is coming soon\u003c\/li\u003e\n\u003cli\u003ePUSH BAR LIGHTING OPTIONS:\u003c\/li\u003e\n\u003cli\u003e20\" bar (single or dual) or (4) 7\" rounds or (8) 3\" pods\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040392466732,"sku":"FBFR-02","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Bronco-Raptor-Tube-Front-Bumper-Render.jpg?v=1789105803"},{"product_id":"hpag-dv8-rbtt2-07","title":"2014-2021 Toyota Tundra Tube Rear Bumper","description":"\u003cp\u003eThe DV8 Offroad Tube Rear Bumper for the 2014-2021 Toyota Tundra features a sleek prerunner-style tube design that provides rear protection while maintaining a lightweight, low-profile appearance that complements the factory look of the truck.\u003c\/p\u003e\u003cp\u003eThe bumper includes mounts for two 3-inch pod lights for rear-facing trail lighting and welded-in zip tie tabs to help keep wiring clean and organized. It is compatible with the factory hitch and reuses the OEM license plate lights for a seamless installation.\u003c\/p\u003e\u003cp\u003eDesigned as a direct bolt-on replacement, the bumper installs using factory mounting points and is compatible with Blind Spot Monitoring on 2018-2021 models. It is finished in a durable micro-texture black powder coat and features CNC logo end caps for a clean finishing touch.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSleek prerunner tube design\u003c\/li\u003e\n\u003cli\u003eLow profile lightweight design that complements the look and feel of the truck\u003c\/li\u003e\n\u003cli\u003e(2) 3\" pod light mounts\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for clean wire management\u003c\/li\u003e\n\u003cli\u003eCompatible with factory hitch\u003c\/li\u003e\n\u003cli\u003eUtilize factory license plate lights\u003c\/li\u003e\n\u003cli\u003eWorks with Blind Spot Monitoring (2018-2021)\u003c\/li\u003e\n\u003cli\u003eDirect fit\/bolt on design\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040392958252,"sku":"RBTT2-07","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2014-2021-Toyota-Tundra-Tube-Rear-Bumper-1.jpg?v=1789105803"},{"product_id":"hpag-dv8-abbr-04","title":"2021-2025 Ford Bronco Frame Horn Reinforcement Brackets","description":"\u003cp\u003eThe DV8 Offroad Frame Horn Reinforcement Brackets for the 2021+ Ford Bronco \u0026amp; Bronco Raptor strengthen the factory frame horn mounts to help prevent damage during winching or recovery situations. Designed for use with winch-capable or recovery point integrated bumpers, these brackets reinforce the failure-prone OEM mounting area and help distribute recovery loads more effectively.\u003c\/p\u003e\u003cp\u003eThe brackets feature a bolt-on installation and include longer bumper mounting hardware when required for proper fitment. Finished in a durable micro-texture black powder coat, they provide added strength while maintaining a clean, factory-style appearance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for use with winch capable or recovery point integrated bumpers\u003c\/li\u003e\n\u003cli\u003eReinforces the failure prone OEM frame horn mounts\u003c\/li\u003e\n\u003cli\u003eIncludes longer bumper mounting hardware (if needed)\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040393220396,"sku":"ABBR-04","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Ford-Bronco-Frame-Horn-Reinforcement-Brackets-1.jpg?v=1789105804"},{"product_id":"hpag-dv8-rbcs2-03","title":"2020-2026 Chevy \u0026 GMC 2500\/3500 Spec Series Rear Bumper","description":"\u003cp\u003eThe DV8 Offroad Spec Series Rear Bumper for 2020-2023 Chevy Silverado and GMC Sierra 2500\/3500 HD trucks provides full-width rear protection with a clean, factory-style fit. Designed as a direct bolt-on upgrade, installation requires no cutting and retains full use of factory features.\u003c\/p\u003e\u003cp\u003eThe bumper includes mounting provisions for two 3\" rear-facing pod lights and welded-in zip tie tabs for clean wire management. It remains fully compatible with the factory hitch, OEM parking sensors, license plate lights, and Blind Spot Monitoring systems. Block-off plates are included for vehicles not equipped with BSM.\u003c\/p\u003e\u003cp\u003eFinished in a durable micro-texture black powder coat with satin black aluminum accent plates, this bumper delivers added protection and functionality while maintaining an OEM-integrated appearance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLight mounting options for (2) 3\" pods for rear facing lighting on the trail\u003c\/li\u003e\n\u003cli\u003eFull width design for protection and full coverage off-road\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for easy wire management\u003c\/li\u003e\n\u003cli\u003eSatin black aluminum accent plates\u003c\/li\u003e\n\u003cli\u003eFactory hitch compatible\u003c\/li\u003e\n\u003cli\u003eUtilizes factory sensors and license plate lights\u003c\/li\u003e\n\u003cli\u003eBolt-on design (No cutting required)\u003c\/li\u003e\n\u003cli\u003eMicro-Texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eBlind Spot Monitoring compatible (block-off plates included if vehicle is not equipped)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2020–2023 Chevrolet Silverado 2500 HD\u003c\/li\u003e\n\u003cli\u003e2020–2023 GMC Sierra 3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040393351468,"sku":"RBCS2-03","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2020-2023-Chevy-_-GMC-2500_3500-Spec-Series-Rear-Bumper-1.jpg?v=1789105803"},{"product_id":"hpag-dv8-rbdr2-05","title":"2019-2026 Ram 2500\/3500 Spec Series Rear Bumper","description":"\u003cp\u003eThe DV8 Offroad 2019-2026 Ram 1500 Rear Tube Bumper offers a sleek prerunner-style design with a lightweight, low-profile build. It installs as a direct bolt-on using factory mounting points and remains compatible with the OEM hitch.\u003c\/p\u003e\u003cp\u003eThe bumper works with single or dual-tip exhaust, supports 4- and 6-sensor models, and reuses factory license plate lights. It includes mounts for two 3\" pod lights, welded zip tie tabs for wire management, a CNC-cut logo, and a durable micro-texture black powder coat finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLight mounting options for (2) 3\" pods for rear facing lighting on the trail\u003c\/li\u003e\n\u003cli\u003eFull width design for protection and full coverage off-road\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for easy wire management\u003c\/li\u003e\n\u003cli\u003eFactory hitch compatible\u003c\/li\u003e\n\u003cli\u003eUtilizes factory sensors and license plate lights\u003c\/li\u003e\n\u003cli\u003eBolt-on design (No cutting required)\u003c\/li\u003e\n\u003cli\u003eMicro-Texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eSatin black aluminum accent plates\u003c\/li\u003e\n\u003cli\u003eIf the vehicle is equipped with backup sensors, we recommend purchasing DV8 Part # MPRSNSR-01 sensor bezels for ease of installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 3.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2019–2026 Ram 2500\u003c\/li\u003e\n\u003cli\u003e2019–2026 Ram 3500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040393777452,"sku":"RBDR2-05","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2019-up-Ram-2500-3500-Spec-Series-Rear-Bumper-1.jpg?v=1789105804"},{"product_id":"hpag-dv8-tcbr-04","title":"2021-2025 Ford Bronco Tailgate Reinforcement Molle Panel","description":"\u003cp\u003eThe DV8 Offroad Tailgate Reinforcement Molle Panel for the Ford Bronco strengthens the factory rear door while adding versatile gear mounting capability. Designed to help distribute weight evenly across the tailgate, it provides added support when running larger spare tires, including 35” setups.\u003c\/p\u003e\u003cp\u003eThe panel features evenly spaced 1\/4\" mounting holes and a molle-compatible pattern for attaching tools, recovery gear, antennas, lights, and other accessories. It is compatible with DV8 quick-release molle panel tool mounts (UNMM-01 \u0026amp; UNRM-01).\u003c\/p\u003e\u003cp\u003eFinished in a durable micro-texture black powder coat, the panel also includes a paintable aluminum logo backing plate for customization.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDistributes weight more evenly across the entire door\u003c\/li\u003e\n\u003cli\u003eProvides additional support when running a 35” spare tire\u003c\/li\u003e\n\u003cli\u003e1\/4\" mounting holes evenly spaced out for additional mounting options\u003c\/li\u003e\n\u003cli\u003ePerfect for tools, accessories, trail recovery, chase lights, and universal antenna mounts\u003c\/li\u003e\n\u003cli\u003eCompatible with molle accessories\u003c\/li\u003e\n\u003cli\u003eWorks with DV8 quick-release molle panel tool mounts (UNMM-01 \u0026amp; UNRM-01)\u003c\/li\u003e\n\u003cli\u003eCompatible with RotopaX Tanks \u0026amp; Mounts in Conjunction with the RotopaX L-Bracket.\u003c\/li\u003e\n\u003cli\u003ePaintable aluminum logo backing plate\u003c\/li\u003e\n\u003cli\u003eMicro-Texture black powder coat finish\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM HD tire carrier or any other aftermarket carrier.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Bronco Raptor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040396857644,"sku":"TCBR-04","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Ford-Bronco-Tailgate-Reinforcement-Molle-Panel-1.jpg?v=1789105806"},{"product_id":"hpag-dv8-rbcs1-04","title":"2019-2025 Chevy Silverado \u0026 GMC Sierra 1500 Tube Rear Bumper","description":"\u003cp\u003eThe 2019-2025 Chevy Silverado and GMC Sierra 1500 Tube Rear Bumper features a lightweight, low profile prerunner style design that complements the factory appearance while improving rear clearance. The bumper installs using factory mounting points and remains fully compatible with the OEM hitch.\u003c\/p\u003e\u003cp\u003eThe bumper includes welded zip tie tabs for clean wire management, integrated mounts for two 3\" pod lights, and reuses factory license plate lights for simple installation. Compatible with both single and dual exhaust models, the bumper can be installed with or without the included dual exhaust tip covers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSleek prerunner tube based design\u003c\/li\u003e\n\u003cli\u003eLow profile, lightweight design that complements the factory look of the truck\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip tie tabs for clean wire management\u003c\/li\u003e\n\u003cli\u003eCompatible with factory hitch\u003c\/li\u003e\n\u003cli\u003eMicro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003e(2) 3\" pod light mounts\u003c\/li\u003e\n\u003cli\u003eUtilizes factory license plate lights \u0026amp; sensors\u003c\/li\u003e\n\u003cli\u003eCNC logo on end caps\u003c\/li\u003e\n\u003cli\u003eCompatible with single or dual tip exhaust models (can be used with or without provided dual exhaust tip covers)\u003c\/li\u003e\n\u003cli\u003eDirect fit\/bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2019–2025 Chevrolet Silverado 1500\u003c\/li\u003e\n\u003cli\u003e2019–2025 GMC Sierra 1500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040397447468,"sku":"RBCS1-04","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2019-up-Silverado-and-Sierra-1500-Tube-Rear-Bumper-1.jpg?v=1789105806"},{"product_id":"hpag-dv8-infend-10fb","title":"2007-2018 Jeep Wrangler JK Front Inner Fenders","description":"\u003cp\u003eFront inner fenders for 2007-2018 Jeep Wrangler JK models designed to help protect engine bay components from trail debris while improving airflow. Constructed from lightweight aluminum with a perforated panel for heat dissipation and finished in a satin black powder coat. Paintable mesh insert allows for customization. Sold as a front left and right pair with bolt-on installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProtects engine components from debris when on the trail\u003c\/li\u003e\n\u003cli\u003eSold as a front pair (Left\/Right)\u003c\/li\u003e\n\u003cli\u003eAluminum perforated panel allows for excess heat to easily dissipate\u003c\/li\u003e\n\u003cli\u003eOur new optimized design\u003c\/li\u003e\n\u003cli\u003ePaintable mesh panel for customization options\u003c\/li\u003e\n\u003cli\u003eBolt-on Installation\u003c\/li\u003e\n\u003cli\u003eMade from lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eNot compatible with some piggyback shocks\u003c\/li\u003e\n\u003cli\u003eNot recommended to use with factory fender flares. Will require significant modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 2.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Satin Black Powder\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007–2018 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040397480236,"sku":"INFEND-10FB","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Jeep-Wrangler-JK-Front-Inner-Fenders-1.jpg?v=1789105807"},{"product_id":"hpag-dv8-srjk-07","title":"2007-2018 Jeep Wrangler JK 4-Door Rock Sliders","description":"\u003cp\u003eBolt-on rock sliders designed for 2007-2018 Jeep Wrangler JK 4-Door models. Built from heavy-duty .160 wall dual 2\" steel tubing to protect rocker panels during off-road use. High-clearance design improves trail capability while three frame-mounted attachment points provide strong, secure support. Finished in a durable micro-texture black powder coat.\u003c\/p\u003e\u003cp\u003eNo drilling or cutting required for installation. Not compatible with factory side steps or OEM sliders.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProtects side rocker panels\u003c\/li\u003e\n\u003cli\u003e.160 wall tube for protection against all those pesky rocks.\u003c\/li\u003e\n\u003cli\u003eHigh clearance design for improved off-road capability\u003c\/li\u003e\n\u003cli\u003eThree frame mounted attachment points for all the rigidity you need when off-roading\u003c\/li\u003e\n\u003cli\u003eDual 2\" tube design with boxed ends\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory side steps\/sliders\u003c\/li\u003e\n\u003cli\u003eNo drilling or cutting required, strictly bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2007–2018 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040397578540,"sku":"SRJK-07","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Jeep-Wrangler-JK-4-Door-Rock-Sliders-1.jpg?v=1789105807"},{"product_id":"hpag-dv8-d-jlbljnt-01","title":"2018-2026 Jeep JL Replacement Ball Joint Kit | Dana 30 or Dana 44","description":"\u003cp\u003eDV8 Offroad’s Wrangler JL Replacement Ball Joint Kit is a heavy-duty upgrade designed for Dana 30 and Dana 44 axles. Featuring SAE 4140 chromoly studs with rolled threads and an SAE 1045 knurled housing, this kit delivers increased strength and durability over factory components.\u003c\/p\u003e\u003cp\u003eBoth flush and standard grease zerks are included for compatibility with factory and aftermarket axle setups. Greaseable, serviceable boots help extend ball joint life in high-heat and demanding driving conditions. Finished in DV8’s signature green with a laser-etched logo.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSAE4140 Chromoly studs with rolled threads\u003c\/li\u003e\n\u003cli\u003eSAE1045 ultra strong knurled green housing\u003c\/li\u003e\n\u003cli\u003eFlush and standard grease zerk included for those who run aftermarket larger axles\u003c\/li\u003e\n\u003cli\u003eLaser-etched logo within the iconic DV8 green\u003c\/li\u003e\n\u003cli\u003eGreaseable and serviceable boots to help extend the life of the ball joints in high temp and use environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 4\u003c\/li\u003e\n\u003cli\u003eProduct Material: 4140 Chromoly and 1045 Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Anodized Green\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2018–2026 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040397775148,"sku":"D-JLBLJNT-01","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Jeep-Wrangler-JL-Replacement-Ball-Joint-Kit-1.jpg?v=1789105807"},{"product_id":"hpag-dv8-unwh-04","title":"40 AMP DT 4-Pin Halo Light Harness","description":"\u003cp\u003ePower your DV8 halo lighting using the 40 AMP DT 4-Pin Halo Light Harness. Built with durable 14-gauge wiring, this harness is designed to deliver consistent, reliable power. A dual-switch system allows independent control of both the primary light and the accent halo. The round, easy-to-install switches let you toggle the halo between OFF, WHITE, or AMBER, giving you flexible lighting options to match driving conditions or styling preferences.\u003c\/p\u003e\u003cp\u003eThe harness utilizes a 40-amp fuse paired with a 40-amp relay to help protect your electrical system while ensuring stable power delivery. A 10-foot wire lead with a 4-pin male Deutsch connector provides a secure connection, while the 8-foot lead routes cleanly to the housing switch. One-foot power and ground leads include an in-line fuse and ring terminals for straightforward battery hookup. It offers true plug-and-play compatibility with the DV8 7-Inch Halo Elite Round Light with Accent Halo and the DV8 20-Inch Halo Elite Single Row Light Bar with Accent Light.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14-gauge wire build\u003c\/li\u003e\n\u003cli\u003eDual switch to power the light and halo\u003c\/li\u003e\n\u003cli\u003eEasy to install round switches\u003c\/li\u003e\n\u003cli\u003eSwitch halo from OFF\/WHITE\/AMBER\u003c\/li\u003e\n\u003cli\u003eUtilizes a 40-amp fuse with a 40-amp relay\u003c\/li\u003e\n\u003cli\u003e10-foot wire lead with 4-pin male Deutsch connector plug\u003c\/li\u003e\n\u003cli\u003e8-foot wire lead with a round housing switch\u003c\/li\u003e\n\u003cli\u003e1-foot power and ground leads with an in-line fuse and ring terminals\u003c\/li\u003e\n\u003cli\u003eDesigned to power one light only\u003c\/li\u003e\n\u003cli\u003eDesigned to work with DV8 lights equipped with accent halo\/ accent lights\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play with the DV8 7-Inch Halo Elite Round Light w\/ Accent Halo\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play with the DV8 20-Inch Halo Elite Single Row Light Bar with Accent Light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Copper\/Rubber\u003c\/li\u003e\n\u003cli\u003eProduct Texture: PVC-wrapped\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040398299436,"sku":"UNWH-04","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/UNWH-04_Graphic.jpg?v=1789105808"},{"product_id":"hpag-dv8-unwh-05","title":"40 AMP DTP 4-Pin Halo Light Harness","description":"\u003cp\u003eThis 40 AMP DTP 4-Pin Halo Light Harness is designed to power a single DV8 halo-equipped light with a clean, reliable wiring solution. Built with durable 14-gauge wire, it features a 40-amp fuse and 40-amp relay to ensure consistent performance and protection. The dual round switches allow independent control of the main light and the accent halo. The halo switch cycles through OFF, WHITE, and AMBER, giving you flexible lighting options from the cab. Both switches are housed in easy-to-install round mounts for a clean interior setup.\u003c\/p\u003e\u003cp\u003eThe harness includes a 10-foot lead with a 4-pin male Deutsch connector for direct connection to compatible DV8 lights, along with a 10-foot lead for the switch. A 1-foot power and ground lead with ring terminals and an in-line fuse makes battery connection straightforward.\u003c\/p\u003e\u003cp\u003eThis harness is plug-and-play with the DV8 20-Inch Halo Elite Dual Row Light Bar with Accent Light and is designed specifically for DV8 lights equipped with accent halo features.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14-gauge wire build\u003c\/li\u003e\n\u003cli\u003eDual switch to power the light and halo\u003c\/li\u003e\n\u003cli\u003eEasy to install round switches\u003c\/li\u003e\n\u003cli\u003eSwitch halo from OFF\/WHITE\/AMBER\u003c\/li\u003e\n\u003cli\u003eUtilizes a 40-amp fuse with a 40-amp relay\u003c\/li\u003e\n\u003cli\u003e10-foot wire lead with 4-pin male Deutsch plus connector plug\u003c\/li\u003e\n\u003cli\u003e10-foot wire lead with a round housing switch\u003c\/li\u003e\n\u003cli\u003e1-foot power and ground leads with an in-line fuse and ring terminals\u003c\/li\u003e\n\u003cli\u003eDesigned to power one light only\u003c\/li\u003e\n\u003cli\u003eDesigned to work with DV8 lights equipped with accent halo\/ accent lights\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play with the DV8 20-Inch Halo Elite Dual Row Light Bar w\/ Accent Light.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Copper\/Rubber\u003c\/li\u003e\n\u003cli\u003eProduct Texture: PVC-wrapped\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040398496044,"sku":"UNWH-05","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/UNWH-05_Graphic.jpg?v=1789105807"},{"product_id":"hpag-dv8-rbdr1-04","title":"2019-2026 Ram 1500 Rear Tube Bumper","description":"\u003cp\u003eThe DV8 Offroad 2019-2026 Ram 1500 Rear Tube Bumper offers a sleek prerunner-style design with a lightweight, low-profile build. It installs as a direct bolt-on using factory mounting points and remains compatible with the OEM hitch.\u003c\/p\u003e\u003cp\u003eThe bumper works with single or dual-tip exhaust, supports 4- and 6-sensor models, and reuses factory license plate lights. It includes mounts for two 3\" pod lights, welded zip tie tabs for wire management, a CNC-cut logo, and a durable micro-texture black powder coat finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSleek prerunner style design\u003c\/li\u003e\n\u003cli\u003eLow profile and lightweight\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eCompatible With Factory Hitch\u003c\/li\u003e\n\u003cli\u003eDirect Fit Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e(2) 3\" pod light mounts\u003c\/li\u003e\n\u003cli\u003eWorks with single or dual tip exhausts\u003c\/li\u003e\n\u003cli\u003eUtilize factory license plate lights\u003c\/li\u003e\n\u003cli\u003eWorks with 4 and 6 sensor models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2019–2026 Ram 1500\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040398889260,"sku":"RBDR1-04","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2019-2026-Ram-1500-Rear-Tube-Bumper-1.jpg?v=1789105884"},{"product_id":"hpag-dv8-rrhg-01","title":"DV8 Offroad Billet Utility Handle | Pair","description":"\u003cp\u003eBillet aluminum utility handles designed for use on DV8 roof racks and overhead MOLLE panels. Provides a solid grab handle for loading and unloading gear and functions as a cleat-style tie-down point for cargo rope or straps. CNC-machined with a laser-etched logo and includes 12.9-grade mounting hardware. An optional molle mounting plate is included for additional utility. Compatible with any M8 or M10 1.5\" long slot found on many roof racks and aftermarket mounting systems. Sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a strong handle while loading\/unloading gear on DV8 roof rack\u003c\/li\u003e\n\u003cli\u003eProvides a grab handle when installed on our overhead molle panels\u003c\/li\u003e\n\u003cli\u003eCleat-style design to offer a secure mounting point for cargo\u003c\/li\u003e\n\u003cli\u003eCNC Billet Design with laser-etched logo\u003c\/li\u003e\n\u003cli\u003eHook points for tie-down straps\u003c\/li\u003e\n\u003cli\u003eComes with 12.9 hardware for strong and secure mounting\u003c\/li\u003e\n\u003cli\u003eOptional molle mounting plate provided to be used to secure rope, hoses and other items similar to a boat cleat\u003c\/li\u003e\n\u003cli\u003eCan be mounted to any M8\/M10 1.5\" long slot found on many roof racks and other aftermarket products\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFinish: Satin\u003c\/li\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Satin Black\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040399085868,"sku":"RRHG-01","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Billet-Utility-Handle-Pair-4.jpg?v=1789105885"},{"product_id":"hpag-dv8-rrhg-02","title":"DV8 Offroad Roof Rack Handle | Pair","description":"\u003cp\u003eBolt-on grab handles designed for use with DV8 Offroad roof racks. Provides a secure handhold when loading or unloading gear. Each handle includes hook points for tie-down straps and M6 slots for accessory mounting. Accepts one Micro Elite Utility Light per handle for added side lighting (light not included). Finished in a durable micro-texture black powder coat. Sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with DV8 Offroad Roof Racks \u0026amp; other racks\u003c\/li\u003e\n\u003cli\u003eProvides a handle while loading\/unloading gear from DV8 roof racks\u003c\/li\u003e\n\u003cli\u003eAccepts (1) Micro Elite Utility Light per handle for side lighting (not included)\u003c\/li\u003e\n\u003cli\u003eProvided hook points for tie down straps\u003c\/li\u003e\n\u003cli\u003eLaser logo plate (optional)\u003c\/li\u003e\n\u003cli\u003eM6 slots on the handle face that can be used for mounting accessories\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040399249708,"sku":"RRHG-02","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/DV8-Offroad-Roof-Rack-Handle-Pair-1.jpg?v=1789105885"},{"product_id":"hpag-dv8-lbtf4-02","title":"2024-2026 Toyota Land Cruiser Brush Guard","description":"\u003cp\u003eBolt-on brush guard designed to work with the factory bumper and recovery points. Adds front-end protection against brush and light debris, and a rugged appearance while retaining full compatibility with all factory sensors and components. Accepts universal 2\" tube light brackets and reuses factory hardware for an easy DIY installation. Finished in a durable micro-texture black powder coat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorks with factory bumper \u0026amp; recovery points\u003c\/li\u003e\n\u003cli\u003eAdds an extra layer of brush protection while off-road\u003c\/li\u003e\n\u003cli\u003eProvides a rugged look\u003c\/li\u003e\n\u003cli\u003eEasy DIY install\u003c\/li\u003e\n\u003cli\u003eAccepts universal 2\" tube light brackets\u003c\/li\u003e\n\u003cli\u003eWorks with all factory sensors and components without issue\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eReuses Factory Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 1.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2024–2026 Toyota Land Cruiser\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040399839532,"sku":"LBTF4-02","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2024-up-Toyota-Land-Cruiser-Brush-Guard-1.jpg?v=1789105886"},{"product_id":"hpag-dv8-rtb1-02bk","title":"DV8 Xtract Traction Boards | Pair | Black","description":"\u003cp\u003eDurable traction boards designed to assist vehicle recovery in mud, sand, and snow. Tested to withstand up to 10 tons of compression. Stackable design for compact storage. Features molded carry handles, shovel functionality, and   multiple mounting holes for flexible mounting options. Sold as a pair. Available in Black, Orange, and Tan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in Black, Orange, \u0026amp; Tan\u003c\/li\u003e\n\u003cli\u003eTested to withstand 10 tons of compression\u003c\/li\u003e\n\u003cli\u003eStackable to save space on the trail\u003c\/li\u003e\n\u003cli\u003eErgonomic handles are intuitive and easy to use\u003c\/li\u003e\n\u003cli\u003eAdditional functionality as a shovel\u003c\/li\u003e\n\u003cli\u003eVarious holes throughout the boards allow multiple mounting options\u003c\/li\u003e\n\u003cli\u003eStorage Bag Included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040401019180,"sku":"RTB1-02BK","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Black-DV8-Xtract-Traction-Board-Pair-2.jpg?v=1789105886"},{"product_id":"hpag-dv8-rtb1-02or","title":"DV8 Xtract Traction Boards | Pair | Orange","description":"\u003cp\u003eDurable traction boards designed to assist vehicle recovery in mud, sand, and snow. Tested to withstand up to 10 tons of compression. Stackable design for compact storage. Features molded carry handles, shovel functionality, and   multiple mounting holes for flexible mounting options. Sold as a pair. Available in Black, Orange, and Tan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in Black, Orange, \u0026amp; Tan\u003c\/li\u003e\n\u003cli\u003eTested to withstand 10 tons of compression\u003c\/li\u003e\n\u003cli\u003eStackable to save space on the trail\u003c\/li\u003e\n\u003cli\u003eErgonomic handles are intuitive and easy to use\u003c\/li\u003e\n\u003cli\u003eAdditional functionality as a shovel\u003c\/li\u003e\n\u003cli\u003eVarious holes throughout the boards allow multiple mounting options\u003c\/li\u003e\n\u003cli\u003eStorage Bag Included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040401084716,"sku":"RTB1-02OR","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Orange-DV8-Xtract-Traction-Board-Pair-1.jpg?v=1789105886"},{"product_id":"hpag-dv8-rtb1-02tn","title":"DV8 Xtract Traction Boards | Pair | Tan","description":"\u003cp\u003eDurable traction boards designed to assist vehicle recovery in mud, sand, and snow. Tested to withstand up to 10 tons of compression. Stackable design for compact storage. Features molded carry handles, shovel functionality, and   multiple mounting holes for flexible mounting options. Sold as a pair. Available in Black, Orange, and Tan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in Black, Orange, \u0026amp; Tan\u003c\/li\u003e\n\u003cli\u003eTested to withstand 10 tons of compression\u003c\/li\u003e\n\u003cli\u003eStackable to save space on the trail\u003c\/li\u003e\n\u003cli\u003eErgonomic handles are intuitive and easy to use\u003c\/li\u003e\n\u003cli\u003eAdditional functionality as a shovel\u003c\/li\u003e\n\u003cli\u003eVarious holes throughout the boards allow multiple mounting options\u003c\/li\u003e\n\u003cli\u003eStorage Bag Included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040401117484,"sku":"RTB1-02TN","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Tan-DV8-Xtract-Traction-Board-Pair-2.jpg?v=1789105886"},{"product_id":"hpag-dv8-rtb2-02bk","title":"DV8 Xtract Mini Traction Board | Pair | Black","description":"\u003cp\u003eThe DV8 Xtract Mini Traction Boards provide reliable vehicle recovery in a compact, space-saving design. Despite their smaller size, they are tested to handle up to 10 tons of compression and deliver effective traction in sand, mud, and snow. These boards feature molded carry handles, stackable storage, and multiple mounting holes for flexible mounting options. They can also be used as a shovel for added utility on the trail. Available in black or orange and sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmaller size that’s just as effective as regular boards\u003c\/li\u003e\n\u003cli\u003eAvailable in Black \u0026amp; Orange\u003c\/li\u003e\n\u003cli\u003eTested to withstand 10 tons of compression\u003c\/li\u003e\n\u003cli\u003eStackable to save space on the trail\u003c\/li\u003e\n\u003cli\u003eErgonomic handles are intuitive and easy to use\u003c\/li\u003e\n\u003cli\u003eAdditional functionality as a shovel\u003c\/li\u003e\n\u003cli\u003eVarious holes throughout the boards allow multiple mounting options\u003c\/li\u003e\n\u003cli\u003eStorage Bag Included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040401281324,"sku":"RTB2-02BK","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Black-DV8-Xtract-Mini-Traction-Board-Pair-4.jpg?v=1789105886"},{"product_id":"hpag-dv8-rtb2-02or","title":"DV8 Xtract Mini Traction Board | Pair | Orange","description":"\u003cp\u003eThe DV8 Xtract Mini Traction Boards provide reliable vehicle recovery in a compact, space-saving design. Despite their smaller size, they are tested to handle up to 10 tons of compression and deliver effective traction in sand, mud, and snow. These boards feature molded carry handles, stackable storage, and multiple mounting holes for flexible mounting options. They can also be used as a shovel for added utility on the trail. Available in black or orange and sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmaller size that’s just as effective as regular boards\u003c\/li\u003e\n\u003cli\u003eAvailable in Black \u0026amp; Orange\u003c\/li\u003e\n\u003cli\u003eTested to withstand 10 tons of compression\u003c\/li\u003e\n\u003cli\u003eStackable to save space on the trail\u003c\/li\u003e\n\u003cli\u003eErgonomic handles are intuitive and easy to use\u003c\/li\u003e\n\u003cli\u003eAdditional functionality as a shovel\u003c\/li\u003e\n\u003cli\u003eVarious holes throughout the boards allow multiple mounting options\u003c\/li\u003e\n\u003cli\u003eStorage Bag Included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eProduct Material: Reinforced Nylon\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040401412396,"sku":"RTB2-02OR","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/Orange-DV8-Xtract-Mini-Traction-Board-Pair-Studio-3.jpg?v=1789105887"},{"product_id":"hpag-dv8-abff-02","title":"2015-2020 Ford F-150 \u0026 Raptor, 2017-2022 Super Duty ACC Relocation Bracket","description":"\u003cp\u003eRelocates the factory Adaptive Cruise Control module to retain ACC functionality when installing an aftermarket front bumper. Compatible with most bumper brands and works with both ACC module types. Features a durable Micro-Texture Black powder coat finish. Simple installation.\u003c\/p\u003e\u003cp\u003eFITMENT:\u003c\/p\u003e\u003cp\u003e2015-2020 Ford F-150\u003c\/p\u003e\u003cp\u003e2017-2020 F-150 Raptor\u003c\/p\u003e\u003cp\u003e2017-2026 Ford Super Duty\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeeps Adaptive Cruise capability even with aftermarket bumper\u003c\/li\u003e\n\u003cli\u003eWorks with most bumper brands\u003c\/li\u003e\n\u003cli\u003eSimple and easy install\u003c\/li\u003e\n\u003cli\u003eWorks with both ACC module types\u003c\/li\u003e\n\u003cli\u003eDoes not work with Platinum grilles or any grille with chrome\/metal\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 2.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015–2020 Ford F-150\u003c\/li\u003e\n\u003cli\u003e2017–2020 Ford F-150\u003c\/li\u003e\n\u003cli\u003e2017–2026 Ford F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003e2017–2026 Ford F-350 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040406163756,"sku":"ABFF-02","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/ABFF-02-2.jpg?v=1789105889"},{"product_id":"hpag-dv8-abgs-01","title":"2022-2025 GMC Sierra 1500 ACC Relocation Bracket (Super Cruise Models)","description":"\u003cp\u003eRepositions the factory ACC sensor to maintain proper Super Cruise and adaptive cruise functionality when installing an aftermarket front bumper. Finished in DV8 Micro-Texture Black Powder Coat for corrosion resistance. Drilling required for installation. Compatible only with 2022-2025 Sierra 1500 Super Cruise equipped trim levels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrilling required. Designed only for the GMC Sierra with the Super Cruise package\u003c\/li\u003e\n\u003cli\u003eAllows use of Super Cruise when running aftermarket front bumpers.\u003c\/li\u003e\n\u003cli\u003eDV8 Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eCompatible with all 2022-2025 refreshed trim levels equipped with the Super Cruise Package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 2\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 2.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eConfirm trim, engine, and installation requirements before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022–2025 GMC Sierra 1500\u003c\/li\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040406294828,"sku":"ABGS-01","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/GMC-Sierra-1500-ACC-Relocation-Bracket-Super-Cruise-Models-2.jpg?v=1789105889"},{"product_id":"hpag-dv8-wbpf-02","title":"DV8 Xtract Winch Fairlead | Closed System","description":"\u003cp\u003eThe DV8 Xtract Winch Fairlead is a durable, low-profile solution designed for synthetic winch rope applications. Featuring a 1-1\/4\" thick closed link and an 18,000 lb working load limit, it provides a strong and secure recovery connection.\u003c\/p\u003e\u003cp\u003eCNC-machined from aerospace-grade 7075 aluminum and finished in a black military-grade hard anodized coating, this fairlead offers excellent strength and corrosion resistance. The closed system includes a stainless steel heavy-duty pin and a Delrin rash guard to help reduce wear when the winch line is slack or cinched tight.\u003c\/p\u003e\u003cp\u003eIntegrated alignment nodules in the fairlead base plate keep the link centered and properly positioned when not in use. Designed for use with synthetic rope only, this fairlead is recommended to be paired with a soft shackle to help prevent damage during recovery operations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 1\/4\" thick closed link\u003c\/li\u003e\n\u003cli\u003eBlack military grade hard anodized finish\u003c\/li\u003e\n\u003cli\u003eWLL 18K lbs\u003c\/li\u003e\n\u003cli\u003eCNC machine from high quality aerospace aluminum 7075\u003c\/li\u003e\n\u003cli\u003eFor synthetic winch rope only\u003c\/li\u003e\n\u003cli\u003eReverse laser engraved etching\u003c\/li\u003e\n\u003cli\u003eStainless Steel Heavy Duty Pin\u003c\/li\u003e\n\u003cli\u003eDelrin rash guard on link to prevent damage to link when slack in line or when cinched up against fairlead base plate\u003c\/li\u003e\n\u003cli\u003eFairlead base plate has alignment nodules to keep the link in place and align it when not being used.\u003c\/li\u003e\n\u003cli\u003e***Recommend using with soft shackle on link to prevent damage**\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 1\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 0.5 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040409375020,"sku":"WBPF-02","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/DV8-Xtract-Winch-Fairlead-Closed-System-1.jpg?v=1789105913"},{"product_id":"hpag-dv8-rbff2-03","title":"2017-2025 Ford Super Duty Spec Series Rear Bumper","description":"\u003cp\u003eDV8 Offroad’s Super Duty Spec Series Rear Bumper delivers full-width rear protection for F250, F350, and F450 models. It supports two 3\" pod lights, retains factory sensors, license plate lights, and works with the OEM hitch. Features welded zip-tie tabs for clean wiring and satin Spec Series mesh inserts. Finished in micro-texture black powder coat. Bolt-on installation with very minor trimming required. Not compatible with drop-down side steps.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with F250\/F350\/F450 models\u003c\/li\u003e\n\u003cli\u003eFull width design for protection and full coverage offroad\u003c\/li\u003e\n\u003cli\u003eLight mounting options for (2) 3\" pods for additional lighting on the trail\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for wire management\u003c\/li\u003e\n\u003cli\u003eContains satin powder coated Spec Series mesh inserts\u003c\/li\u003e\n\u003cli\u003eFactory Hitch compatible\u003c\/li\u003e\n\u003cli\u003eRetains the use of factory sensors and license plate lights\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eVery Minor Trimming Required\u003c\/li\u003e\n\u003cli\u003eNot Compatible with Drop Down Side Step\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation Level - 1 = Easy,   5 = Hard: 3\u003c\/li\u003e\n\u003cli\u003eInstallation Time (hrs): 4 Hours\u003c\/li\u003e\n\u003cli\u003eProduct Material: Steel\u003c\/li\u003e\n\u003cli\u003eProduct Texture: Micro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Required (Y\/N): YES\u003c\/li\u003e\n\u003cli\u003eProp 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle application overview\u003c\/h3\u003e\u003cp\u003eManufacturer-confirmed applications for DV8 Offroad RBFF2-03:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2017–2026 Ford F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003e2017–2026 Ford F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003e2017–2026 Ford F-450 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot compatible with the drop-down side step.\u003c\/strong\u003e Minor trimming is required. Confirm your vehicle equipment before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/dv8offroad.com\/products\/super-duty-rear-bumper-spec\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer fitment information\u003c\/a\u003e · \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBFF2-03_installation_Guide.pdf?v=16952670004538540028\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer installation guide\u003c\/a\u003e\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":54040411668780,"sku":"RBFF2-03","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2017-2020-Ford-Super-Duty-Spec-Series-Rear-Bumper-1.jpg?v=1789105914"}],"url":"https:\/\/lee-mods.com\/collections\/dv8-offroad.oembed","provider":"Lee Mods inc.","version":"1.0","type":"link"}