{"title":"Toyota GR86 \u0026 Subaru BRZ","description":"\u003cp\u003eShop Toyota GR86 and Subaru BRZ graphics, trim, lighting, protection, and styling accessories.\u003c\/p\u003e","products":[{"product_id":"rear-bumper-sti-style-pinstripe-2013-2020-scion-fr-s-subaru-brz-toyota-86","title":"Rear Bumper STI Style Pinstripe - 2013-2020 Scion FR-S \/ Subaru BRZ \/ Toyota 86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eRear Bumper STI Style Pinstripe\u003c\/h2\u003e\n\u003cp\u003eThese pinstripes are custom cut to fit the bottom of the bumper. Beware of other sellers selling strips of vinyl that are not contoured to fit the bumper properly. This material is durable and will last for years.\u003c\/p\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eClean the surface of the bumper. The easiest way to apply this is to wet the back of the vinyl. You can even use a little soap. This will allow you to slide the vinyl around, but will make it harder to stick. You will have to wait until it dries completely to complete a wet installation. Start at one corner and slowly apply the stripe to the bumper. Continue until you reach the other corner. Please look carefully at the pictures to see where the pin installs. Comes with 2 stripes. 1 is for backup and will be the same color as the other.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Blue","offer_id":53986891333932,"sku":"SF13BRZSTIRB-BL","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986891366700,"sku":"SF13BRZSTIRB-GD","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986891399468,"sku":"SF13BRZSTIRB-GN","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986891432236,"sku":"SF13BRZSTIRB-OR","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986891465004,"sku":"SF13BRZSTIRB-PI","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986891497772,"sku":"SF13BRZSTIRB-PR","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986891530540,"sku":"SF13BRZSTIRB-SI","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986891563308,"sku":"SF13BRZSTIRB-GY","price":28.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986891596076,"sku":"SF13BRZSTRB-WH","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986891628844,"sku":"SF13BRZSTIRB-RD","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986891661612,"sku":"SF13BRZSTIRB-HB","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986891694380,"sku":"SF13BRZSTIRB-HY","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rear-bumper-sti-style-pinstripe-2013-2020-scion-fr-s-subaru-brz-toyota-86-stickerfab-1.jpg?v=1787932939"},{"product_id":"front-bumper-sti-ts-style-pinstripe-2013-2021-brz","title":"Front Bumper STI TS Style Pinstripe - 2013-2021 BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eTS Style Front Bumper Pinstripe\u003c\/h2\u003e\n\u003cp\u003eWelcome to my Veteran Owned shop! These pinstripes are custom cut to fit the bottom of the bumper. Beware of other sellers selling strips of vinyl that are not contoured to fit the bumper properly. This material is durable and will last for years. Please visit my store if you are looking for other BRZ products or products for a different model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLATION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the surface of the bumper. The easiest way to apply this is to wet the back of the vinyl. You can even use a little soap. This will allow you to slide the vinyl around, but will make it harder to stick. You will have to wait until it dries completely to complete a wet installation. Start at one corner and slowly apply the stripe to the bumper. Continue until you reach the other corner.\u003c\/p\u003e\n\u003cp\u003ePlease look carefully at the pictures to see where the pin installs. Comes with 2 stripes. 1 is for backup and will be the same color as the other.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Blue","offer_id":53986891956524,"sku":"13BRZSTIFB-BL","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986891989292,"sku":"13BRZSTIFB-GD","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986892022060,"sku":"13BRZSTIFB-GR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986892054828,"sku":"13BRZSTIFB-OR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986892087596,"sku":"13BRZSTIFB-PI","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986892120364,"sku":"13BRZSTIFB-PR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986892153132,"sku":"13BRZSTIFB-SI","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986892185900,"sku":"13BRZSTIFB-GY","price":18.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986892218668,"sku":"13BRZSTIFB-WH","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986892251436,"sku":"13BRZSTIFB-RD","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986892284204,"sku":"13BRZSTIFB-HB","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986892316972,"sku":"13BRZSTIFB-HY","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/front-bumper-sti-ts-style-pinstripe-2013-2021-brz-stickerfab-1.jpg?v=1787932942"},{"product_id":"jdm-style-rear-view-mirror-stripes-2013-2021-fr-s-brz-86","title":"JDM Style Rear View Mirror Stripes - 2013-2021 FR-S \/ BRZ \/ 86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eJDM Style Rear View Mirror Pinstripes\u003c\/h2\u003e\n\u003cp\u003eThese door mirror stripes will give your vehicle a unique appearance. They install over your mirror covers in a matter of seconds. This material is durable and will last for years. Please browse our store if you are looking for other 2013-2020 FR-S \/ BRZ ? 86 products or products for a different model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLATION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the mirror cover and wet the pinstripe overlay. This allows it to be moved into position with ease. The material is forgiving in general if it needs to be lifted again so that you can apply more water or a soapy water mixture. The hair dryer can be used to encourage adhesion. Test the overlay with small amounts of heat and then use more. General rules for heating the material are if you wouldn't heat your hand to that temperature, don't heat the material to that temperature. INSTALLATION IS SIMPLE!\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Blue","offer_id":53986905227564,"sku":"13FTMIRPINBL","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986905260332,"sku":"13FTMIRPINGD","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986905293100,"sku":"13FTMIRPINGR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986905325868,"sku":"13FTMIRPINOR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986905358636,"sku":"13FTMIRPINPI","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986905391404,"sku":"13FTMIRPINPR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986905424172,"sku":"13FTMIRPINSI","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986905456940,"sku":"13FTMIRPINGY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986905489708,"sku":"13FTMIRPINWH","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986905522476,"sku":"13FTMIRPINRD","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986905555244,"sku":"13FTMIRPINHB","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986905588012,"sku":"13FTMIRPINFY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986905620780,"sku":"13FTMIRPIN3DCF","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/jdm-style-rear-view-mirror-stripes-2013-2021-fr-s-brz-86-stickerfab-1.jpg?v=1787933239"},{"product_id":"smoked-tail-light-overlays-dark-light-red-or-yellow-2017-2021-toyota-86-subaru-brz","title":"Smoked Tail Light Overlays (Dark, Light, Red, or Yellow) - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eSmoked Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp. Available in dark smoke, light smoke, red, and yellow.  Special Edition material are available in another listing.\u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. Dark smoke is what is seen in the pictures. Light smoke is about half the darkness of this.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3.5 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986907423020,"sku":"SF-1786TL-DS","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986907455788,"sku":"SF-1786TL-LS","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986907488556,"sku":"SF-1786TL-RD","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986907521324,"sku":"SF-1786TL-YL","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/smoked-tail-light-overlays-dark-light-red-or-yellow-2017-2021-toyota-86-subaru-brz-stickerfab-1.jpg?v=1787933249"},{"product_id":"special-edition-dark-smoke-galaxy-tail-light-overlays-2017-2021-toyota-86-subaru-brz","title":"Special Edition Dark Smoke Galaxy Tail Light Overlays - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eDark Smoke Galaxy Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp.\u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. \u003c\/p\u003e\n\u003cp\u003eThis special edition material is made in the USA and extremely high quality.  You won't see many people making precut vinyls with it because it is expensive to stock and harder to cut.  However, we really like how unique it is and have spent the money to offer it to you.  Air egress channels allow for easier installation.  They prevent much of the bubbling you encounter trying to install normal materials.\u003cbr\u003e\u003cbr\u003eGalaxy material has a high pearlescent flake effect. Light shined onto the material reflects a variety of colors.\u003cbr\u003e\u003cbr\u003e\u003cem data-mce-fragment=\"1\"\u003eAlso fits\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOLM\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOE Plus Linear style lamps.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003cbr\u003e\u003cbr\u003eSince this special edition material does have air egress channels it is possible to do a dry install.  We did for our stock photos, but it will increase the application time for novices.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986907750700,"sku":"1786TLDSG","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-dark-smoke-galaxy-tail-light-overlays-2017-2021-toyota-86-subaru-brz-stickerfab-1.jpg?v=1787933251"},{"product_id":"special-edition-dark-smoke-carbon-fiber-tail-light-overlays-2017-2021-toyota-86-subaru-brz","title":"Special Edition Dark Smoke Carbon Fiber Tail Light Overlays - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eDark Smoke Carbon Fiber Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp.\u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. \u003c\/p\u003e\n\u003cp\u003eThis special edition material is made in the USA and extremely high quality.  You won't see many people making precut vinyls with it because it is expensive to stock and harder to cut.  However, we really like how unique it is and have spent the money to offer it to you.  Air egress channels allow for easier installation.  They prevent much of the bubbling you encounter trying to install normal materials.\u003cbr\u003e\u003cbr\u003eCarbon fiber material has effect on lights.   It really gives them a completely different look.  When the lights are off it just looks like a stealthy, dark carbon fiber.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAlso fits OLM OE Plus Linear style lamps.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003cbr\u003e\u003cbr\u003eSince this special edition material does have air egress channels it is possible to do a dry install.  We did for our stock photos, but it will increase the application time for novices.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986912600364,"sku":"1786TLDSCF","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-dark-smoke-carbon-fiber-tail-light-overlays-2017-2021-toyota-86-subaru-brz-stickerfab-1-34437260476735.jpg?v=1787933301"},{"product_id":"special-edition-dark-smoke-honeycomb-tail-light-overlays-2017-2021-toyota-86-subaru-brz","title":"Special Edition Dark Smoke Honeycomb Tail Light Overlays - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eDark Smoke Honeycomb Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp.\u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. \u003c\/p\u003e\n\u003cp\u003eThis special edition material is made in the USA and extremely high quality.  You won't see many people making precut vinyls with it because it is expensive to stock and harder to cut.  However, we really like how unique it is and have spent the money to offer it to you.  Air egress channels allow for easier installation.  They prevent much of the bubbling you encounter trying to install normal materials.\u003cbr\u003e\u003cbr\u003eHoneycomb material has a unique pattern when light is emitted behind it.  When unlit you can barely see the honeycomb pattern.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAlso fits\u003cspan\u003e \u003c\/span\u003eOLM\u003cspan\u003e \u003c\/span\u003eOE Plus Linear style lamps.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003cbr\u003e\u003cbr\u003eSince this special edition material does have air egress channels it is possible to do a dry install.  We did for our stock photos, but it will increase the application time for novices.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986912665900,"sku":"1786TLDSHC","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-dark-smoke-honeycomb-tail-light-overlays-2017-2021-toyota-86-subaru-brz-stickerfab-1-34437260509503.jpg?v=1787933301"},{"product_id":"olm-oe-plus-linear-style-sequential-tail-light-overlays-dark-light-red-or-yellow-2017-2021-toyota-86-subaru-brz","title":"OLM OE Plus Linear Style Sequential Tail Light Overlays (Dark, Light, Red, or Yellow) - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eSmoked Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp. Available in dark smoke, light smoke, red, and yellow.  Special Edition material are available in another listing.\u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. Dark smoke is what is seen in the pictures. Light smoke is about half the darkness of this.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3.5 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986912993580,"sku":"SF-1786TL-DS","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986913026348,"sku":"SF-1786TL-LS","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986913059116,"sku":"SF-1786TL-RD","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986913091884,"sku":"SF-1786TL-YL","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/olm-oe-plus-linear-style-sequential-tail-light-overlays-dark-light-red-or-yellow-2017-2021-toyota-86-subaru-brz-stickerfab-1-34437263622463.jpg?v=1787933301"},{"product_id":"special-edition-dark-smoke-stealth-tail-light-overlays-2017-2021-toyota-86-subaru-brz","title":"Special Edition Dark Smoke Stealth Tail Light Overlays - 2017-2021 Toyota 86 \/ Subaru BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eDark Smoked Stealth Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is an overlay and we am not selling tail lights. These cover the center of the lamp. \u003c\/p\u003e\n\u003cp\u003eVinyl can really change the look of your vehicle. You can tastefully take your vehicle to looking stock to not without breaking the bank. Style your OEM tail lights by installing these tail light overlays.\u003c\/p\u003e\n\u003cp\u003eComes with a pair of overlays (left \/ right). Please look at the pictures closely to see how they are installed and follow the instructions below. \u003c\/p\u003e\n\u003cp\u003eThis special edition material is made in the USA and extremely high quality.  You won't see many people making precut vinyls with it because it is expensive to stock and harder to cut.  However, we really like how unique it is and have spent the money to offer it to you.  Air egress channels allow for easier installation.  They prevent much of the bubbling you encounter trying to install normal materials.\u003c\/p\u003e\n\u003cp\u003eStealth material has a unique matte finish to it.\u003cbr\u003e\u003cbr\u003e\u003cem data-mce-fragment=\"1\"\u003eAlso fits\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOLM\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eOE Plus Linear style lamps.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eINSTALLATION\u003c\/h3\u003e\n\u003cp\u003eDifficulty 3 of 5\u003c\/p\u003e\n\u003cp\u003eRecommended Tool(s): Heat Gun or Hair Dryer, soapy water\u003c\/p\u003e\n\u003cp\u003eClean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. It is recommended you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out any creases with your fingers. You may have to pull up sections and reapply if many creases begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.\u003cbr\u003e\u003cbr\u003eSince this special edition material does have air egress channels it is possible to do a dry install.  We did for our stock photos, but it will increase the application time for novices.\u003c\/p\u003e\n\u003cp\u003ePlease check out the FTSpeed video on this installation.  If you're an FTSpeed customer, try adding this item to your cart there and check out the other items they offer!\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yggj8kHiJQQ?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986913747244,"sku":"1786TLDSST","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-dark-smoke-stealth-tail-light-overlays-2017-2021-toyota-86-subaru-brz-stickerfab-1-34437260443967.jpg?v=1787933302"},{"product_id":"c-cut-tail-light-overlays-2022-brz-gr86","title":"C-cut Tail Light Overlays - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eC-Cut Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003eThis is a variation of the original version 1.0 tail light overlays.  It's a little more unique when it comes to design.  We definitely like the way it turned out.\u003c\/p\u003e\n\u003cp\u003eWe imported parts from Japan just to jump on this new platform!\u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003edark smoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003eSoapy Water \u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/75OLv6dImj8?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986954182956,"sku":"22BRZ86TLCCUT-DS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986954215724,"sku":"22BRZ86TLCCUT-LS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986954248492,"sku":"22BRZ86TLCCUT-ST","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986954281260,"sku":"22BRZ86TLCCUT-GY","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986954314028,"sku":"22BRZ86TLCCUT-HC","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986954346796,"sku":"22BRZ86TLCCUT-CB","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986954379564,"sku":"22BRZ86TLCCUT-LX","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986954412332,"sku":"22BRZ86TLCCUT-RD","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986954445100,"sku":"22BRZ86TLCCUT-YL","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/c-cut-tail-light-overlays-2022-brz-gr86-stickerfab-1-34437331583295.jpg?v=1787933424"},{"product_id":"front-oem-sidemarker-overlays-2022-brz-gr86","title":"Front OEM Sidemarker Overlays - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\" class=\"product-single__title\" itemprop=\"name\"\u003eFront OEM Sidemarker Overlays\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eKnock out that orange OEM sidemarker with our little overlays.  Available in a variety of materials, there is something to help you get a theme going with your vehicle or continue one.  \u003c\/p\u003e\n\u003cp\u003eLooks great in the light and even better at night.  \u003c\/p\u003e\n\u003cp\u003eSold as a \u003cstrong\u003epair\u003c\/strong\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStickerFab Application Fluid\u003c\/a\u003e (or 1 drop of dish soap mixed with 1 cup of water)\u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/XvNnJHWFxNM?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986953953580,"sku":"22BRZ86FSM-DS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986953986348,"sku":"22BRZ86FSM-LS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986954019116,"sku":"22BRZ86FSM-ST","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986954051884,"sku":"22BRZ86FSM-GY","price":12.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986954084652,"sku":"22BRZ86FSM-HC","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986954117420,"sku":"22BRZ86FSM-CB","price":15.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986954150188,"sku":"22BRZ86FSM-LX","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/front-oem-sidemarker-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933424"},{"product_id":"version-1-0-tail-light-overlays-fits-2022-brz-gr86","title":"Version 1.0 Tail Light Overlays fits 2022+ BRZ \/ GR86","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n    \u003cli\u003eUnique look\u003c\/li\u003e\n    \u003cli\u003eEasy to install\u003c\/li\u003e\n    \u003cli\u003eInstallation video available.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eVersion 1.0 Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003eThese are going to be the gold standard in tail light overlays for 2022+ Subaru BRZ and Toyota 86 vehicles.  This simple overlay changes up the look of your rear end and blends in the dark trunk trim with the tail lights.\u003c\/p\u003e\n\u003cp\u003eWe imported parts from Japan just to jump on this new platform!\u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003cp\u003eSold as a \u003cstrong\u003epair\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n    \u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n    \u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n    \u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e\u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e\u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n    \u003cdiv class=\"leftColumn\"\u003e\n        \u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n        \u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003eMicrofiber\u003c\/li\u003e\n            \u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n            \u003cli\u003e\n\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStickerFab Installation Fluid\u003c\/a\u003e \/ Soapy Water in a pinch\u003c\/li\u003e\n            \u003cli\u003e\n\u003ca href=\"products\/mini-heat-gun-for-vinyl-application\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHeat Gun\u003c\/a\u003e or Hair Dryer (optional)\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"rightColumn\"\u003e\u003ciframe width=\"2560\" height=\"1321\" src=\"https:\/\/www.youtube.com\/embed\/75OLv6dImj8\" title=\"Version 1.0 and C-cut Tail Light Overlays - 2022 BRZ \/ 86\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986954477868,"sku":"22BRZ86TL1-DS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986954510636,"sku":"22BRZ86TL1-LS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986954543404,"sku":"22BRZ86TL1-ST","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986954576172,"sku":"22BRZ86TL1-GY","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986954608940,"sku":"22BRZ86TL1-HC","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986954641708,"sku":"22BRZ86TL1-CB","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986954674476,"sku":"22BRZ86TL1-LX","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke LX+","offer_id":53986954707244,"sku":"22BRZ86TL1-LLX","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986954740012,"sku":"22BRZ86TL1-RD","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":53986954772780,"sku":"22BRZ86TL1-AM","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986954805548,"sku":"22BRZ86TL1-YL","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/version-1-0-tail-light-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933424"},{"product_id":"rear-sidemarker-overlays-fits-2022-brz-gr86","title":"Rear Sidemarker Overlays fits 2022+ BRZ \/ GR86","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n    \u003cli class=\"product-single__title\" style=\"text-align: left;\" itemprop=\"name\"\u003eEasy to install\u003c\/li\u003e\n    \u003cli style=\"text-align: left;\"\u003eInstallation video available below\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eRear Sidemarker Overlays\u003c\/h2\u003e\n\u003cp\u003eThe OEM tail lights for the 2022 BRZ and GR86 have bright red reflectors.  We can knock a little of the red out and blend it with the rest of the tail light with ease.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe imported parts from Japan just to jump on this new platform!\u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n    \u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n    \u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n    \u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e\u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e\u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n    \u003cdiv class=\"leftColumn\"\u003e\n        \u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n        \u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003eMicrofiber\u003c\/li\u003e\n            \u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n            \u003cli\u003eSoapy Water \u003c\/li\u003e\n            \u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"rightColumn\"\u003e\n        \u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hJt1GMMH_pg?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986955460908,"sku":"22BRZ86RSM-DS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986955493676,"sku":"22BRZ86RSM-LS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986955526444,"sku":"22BRZ86RSM-LX","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke LX+","offer_id":53986955559212,"sku":"22BRZ86RSM-LLX","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986955591980,"sku":"22BRZ86RSM-ST","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986955624748,"sku":"22BRZ86RSM-GY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986955657516,"sku":"22BRZ86RSM-HC","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986955690284,"sku":"22BRZ86RSM-CB","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rear-sidemarker-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933424"},{"product_id":"front-bumper-sti-ts-style-pinstripe-fits-2022-brz","title":"Front Bumper STI TS Style Pinstripe fits 2022+ BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003etS Style Front Bumper Pinstripe\u003c\/h2\u003e\n\u003cp\u003eDon't be surprised if we see another authentic Subaru tS stripe with this generation of new BRZs.  To get out ahead of even the OEM Subaru part, we've created our own which is available right now.\u003c\/p\u003e\n\n\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003cp\u003e\u003cspan face=\"Trebuchet MS\"\u003e\u003cstrong\u003eINSTALLATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClean the surface of the bumper.  Often you will see us talk about wet installations.  With this pinstripe, we recommend a dry installation in 70-80 degree weather.  Given those conditions, still park you vehicle in the shade.\u003c\/p\u003e\n\u003cp\u003eWe have included photos that show the initial target placement of the stripe in one corner.  Slowly work your way to the other corner like in our video and guide the pinstripe along the way.  Push down little 1-2 inch sections at a time, readjusting your alignment as needed.  You should finish in the opposite corner of the bumper.\u003c\/p\u003e\n\u003cp\u003eComes with 2 stripes. 1 is for backup and will be the same color as the other.\u003c\/p\u003e\n\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cdCESn4eA8Y?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Blue","offer_id":53986955723052,"sku":"22BRZSTIFB-BL","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986955755820,"sku":"22BRZSTIFB-GD","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986955788588,"sku":"22BRZSTIFB-GR","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986955821356,"sku":"22BRZSTIFB-OR","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986955854124,"sku":"22BRZSTIFB-PI","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986955886892,"sku":"22BRZSTIFB-PR","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986955919660,"sku":"22BRZSTIFB-SI","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986955952428,"sku":"22BRZSTIFB-GY","price":22.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986955985196,"sku":"22BRZSTIFB-WH","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986956017964,"sku":"22BRZSTIFB-RD","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986956050732,"sku":"22BRZSTIFB-HB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986956083500,"sku":"22BRZSTIFB-HY","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/front-bumper-sti-ts-style-pinstripe-2022-brz-stickerfab-1.jpg?v=1787933424"},{"product_id":"ez-install-vinyl-door-cup-protectors-2013-2022-fr-s-brz-gr86","title":"EZ Install Vinyl Door Cup Protectors - 2013-2022 FR-S \/ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eEZ Install Vinyl Door Cup Protectors\u003c\/h2\u003e\n\u003cp\u003eThese pre-cut vinyl protection stickers install in the door cup behind your door handles. They protect your existing paint \/ clearcoat from scratches and give it a textured appearance.\u003cbr\u003e\u003cbr\u003eThis EZ Install version is smaller than the original and does not have relief cuts.  Installation is slightly easier.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePhotos are currently shown for the WRX \/ STI but should be updated soon.\u003c\/p\u003e\n\u003cp\u003eSOLD AS A SET OF 4. Only 2 are required per vehicle.  Extra are shipped so there is room for error during installation as you become more familiar with the material.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:  \u003c\/strong\u003eDoes not include door handle overlays.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot All Materials are Created Equally \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen purchasing vinyl overlays, keep in mind that not all materials are created equally. I use premium vinyl which has high initial costs, but are the industry standards for high quality materials. Also made in the USA. Dragon Wrap™ Carbon Fiber Films (3D Carbon) is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application. Minimum application temperature is 40 degrees Fahrenheit. Up to 5 year durability outdoors. Rated EXCELLENT for WATER RESISTANCE, HUMIDITY RESISTANCE, and SOLVENT RESISTANCE. \u003cbr\u003e\u003cbr\u003eMatte black and clear materials are also sourced from the US and are of much higher than average quality.\u003c\/p\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003ePlease follow these guidelines for the best results. Clean the painted surface behind the door handles. \u003cbr\u003e\u003cbr\u003eFor the carbon fiber version, there are air egress channels so I recommend using a dry application method.  Just align the item and press down the center, working your way outward.  Hold the ends up and press the material down, stretching it so that it doesn't crease.\u003c\/p\u003e\n\u003cp\u003eFor matte black and clear versions, use a slightly soapy, wet application.  The water will allow you to remove air from behind the material, preventing bubbles.  You will use the same technique though.  Press down in the center after aligning the material.  Work your ways towards the corners.  Do not press down on the corners first.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yPeb9OKzM2w\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986961588524,"sku":"22BRZDCPEZ-3DB","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":53986961621292,"sku":"22BRZDCPEZ-MB","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Clear (Rock Guard)","offer_id":53986961654060,"sku":"22BRZDCPEZ-RG","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/ez-install-vinyl-door-cup-protectors-2013-2022-fr-s-brz-gr86-stickerfab-1.jpg?v=1787933427"},{"product_id":"front-jdm-sidemarker-overlays-2022-brz-gr86","title":"Front JDM Sidemarker Overlays - 2022+ BRZ \/ GR86","description":"\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for JDM sidemarkers\u003c\/li\u003e\n\u003cli\u003eCustom look\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eInstallation video available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eFront JDM Sidemarker Overlays\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eIf you want to go above and beyond the white JDM sidemarkers, here you go.  Available in a variety of materials, there is something to help you get a theme going with your vehicle or continue one.  \u003c\/p\u003e\n\u003cp\u003eLooks great in the light and even better at night.  \u003c\/p\u003e\n\u003cp\u003eSold as a pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e  This is not for the USDM orange sidemarkers.  It goes on top of the white JDM sidemarkers (not included).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003eSoapy Water \u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Zdi9Yv3w1uc?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986962014508,"sku":"22BRZ86FSMJDM-DS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986962047276,"sku":"22BRZ86FSMJDM-LS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986962080044,"sku":"22BRZ86FSMJDM-ST","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986962112812,"sku":"22BRZ86FSMJDM-GY","price":12.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986962145580,"sku":"22BRZ86FSMJDM-HC","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986962178348,"sku":"22BRZ86FSMJDM-CB","price":15.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986962211116,"sku":"22BRZ86FSMJDM-LX","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/front-jdm-sidemarker-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933428"},{"product_id":"version-2-0-tail-light-overlays-2022-brz-gr86","title":"Version 2.0 Tail Light Overlays - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\" class=\"product-single__title\" itemprop=\"name\"\u003eVersion 2.0 Tail Light Overlays\u003c\/h2\u003e\n\u003cp\u003eVersion 2.0 tail light overlays can be combined with the 1.0 or C-cut tail light overlays and rear sidemarker overlays.  You can also run them alone.  This covers the higher portion of the lens.  \u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e In the photos these are photo'd with the 1.0 overlays and rear sidemarker overlays.  The first photo points to the area you will be receiving.\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003eSoapy Water \u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/1bRgcZbIEvA?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986962243884,"sku":"22BRZ86TL2-DS","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986962276652,"sku":"22BRZ86TL2-LS","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986962309420,"sku":"22BRZ86TL2-ST","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986962342188,"sku":"22BRZ86TL2-GY","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986962374956,"sku":"22BRZ86TL2-HC","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986962407724,"sku":"22BRZ86TL2-CB","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986962440492,"sku":"22BRZ86TL2-LX","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986962473260,"sku":"22BRZ86TL2-RD","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986962506028,"sku":"22BRZ86TL2-YL","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/version-2-0-tail-light-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933428"},{"product_id":"reverse-lamp-overlay-2022-brz-gr86","title":"Reverse Lamp Overlay - 2022+ BRZ \/ GR86","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eVarious unique options\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eInstallation video below\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\" class=\"product-single__title\" itemprop=\"name\"\u003eReverse Lamp Overlay\u003c\/h2\u003e\n\u003cp\u003eWe're continuing to knock out more templates so that you can achieve a certain theme with your vehicle.  From dark smoke options to ultra unique patterns, there's a lot of choices when it comes to styling your vehicle.\u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003eSoapy Water \u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003cbr\u003e\u003cbr\u003eYou can push pull the trim back or push your lamp inwards and this will allow the vinyl to slip behind the trim.  This makes that installation simple and easier to achieve full coverage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Z6o20Tj06j8?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986965651756,"sku":"22BRZ86RL-DS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986965684524,"sku":"22BRZ86RL-LS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986965717292,"sku":"22BRZ86RL-ST","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986965750060,"sku":"22BRZ86RL-GY","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986965782828,"sku":"22BRZ86RL-HC","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986965815596,"sku":"22BRZ86RL-CB","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986965848364,"sku":"22BRZ86RL-LX","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke LX+","offer_id":53986965881132,"sku":"22BRZ86RL-LSLX","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986965913900,"sku":"22BRZ86RL-RD","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986965946668,"sku":"22BRZ86RL-YL","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/reverse-lamp-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933431"},{"product_id":"tow-hook-cover-overlay-2022-brz","title":"Tow Hook Cover Overlay - 2022 BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eTow Hook Cover Overlay\u003c\/h2\u003e\n\u003cp\u003ePutting all jokes aside from towing a Subaru around, this little accent is neat.  It just looks good on your vehicle.  A small customization anyone can do.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSold as a pair.  Only one is needed.  Keep the other around as a backup.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003cp\u003e\u003cspan face=\"Trebuchet MS\"\u003e\u003cstrong\u003eINSTALLATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClean the surface of the bumper.  We recommend a dry installation in 70-80 degree weather.  Given those conditions, still park you vehicle in the shade.  You will want to keep a microfiber and detailer around to clean the surface before installation.\u003c\/p\u003e\nPlease watch our video for the full installation, tips, tricks, and more.\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Cz-CKk4E7VU?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Red","offer_id":53986968699180,"sku":"22BRZTOW-RD","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53986968731948,"sku":"22BRZTOW-BL","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986968764716,"sku":"22BRZTOW-GD","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986968797484,"sku":"22BRZTOW-GR","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986968830252,"sku":"22BRZTOW-OR","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986968863020,"sku":"22BRZTOW-PI","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986968895788,"sku":"22BRZTOW-PR","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986968928556,"sku":"22BRZTOW-SI","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986968961324,"sku":"22BRZTOW-GY","price":4.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986968994092,"sku":"22BRZTOW-WH","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986969026860,"sku":"22BRZTOW-HB","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986969059628,"sku":"22BRZTOW-HY","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black (Matte)","offer_id":53986969092396,"sku":"22BRZTOW-MB","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black (Gloss)","offer_id":53986969125164,"sku":"22BRZTOW-GB","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986969157932,"sku":"22BRZTOW-3DB","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/tow-hook-cover-overlay-2022-brz-stickerfab-1.jpg?v=1787933435"},{"product_id":"headlight-accent-overlays-2022-brz-gr86","title":"Headlight Accent Overlays - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eHeadlight Accent Overlays\u003c\/h2\u003e\n\u003cp\u003eThe area around the headlights of the new BRZ \/ GR86 caught our eyes immediately along with all the customers we surveyed.  Adding a headlight accent brings more attention to these beautiful lights and they can even be seen from the sides.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003cp\u003e\u003cspan face=\"Trebuchet MS\"\u003e\u003cstrong\u003eINSTALLATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClean the surface of the bumper.  We recommend a wet installation in 70-80 degree weather.  Given those conditions, still park you vehicle in the shade.  You will want to keep some soapy water around along with items to clean the area.\u003c\/p\u003e\nPlease watch our video for the full installation, tips, tricks, and more.\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/imbKopSkA6o?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Black (Matte)","offer_id":53986969420076,"sku":"22BRZHLACC-MB","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Black (Gloss)","offer_id":53986969452844,"sku":"22BRZHLACC-GB","price":18.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986969485612,"sku":"22BRZHLACC-3DB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53986969518380,"sku":"22BRZHLACC-BL","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986969551148,"sku":"22BRZHLACC-GD","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986969583916,"sku":"22BRZHLACC-GR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986969616684,"sku":"22BRZHLACC-OR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986969649452,"sku":"22BRZHLACC-PI","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986969682220,"sku":"22BRZHLACC-PR","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986969714988,"sku":"22BRZHLACC-SI","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986969747756,"sku":"22BRZHLACC-GY","price":18.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986969780524,"sku":"22BRZHLACC-WH","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986969813292,"sku":"22BRZHLACC-RD","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986969846060,"sku":"22BRZHLACC-HB","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986969878828,"sku":"22BRZHLACC-HY","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/headlight-accent-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933435"},{"product_id":"tow-hook-cover-overlay-with-tow-logo-2022-brz","title":"Tow Hook Cover Overlay with \"TOW\" Logo - 2022 BRZ","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eTow Hook Cover Overlay with \"TOW\" Logo\u003c\/h2\u003e\n\u003cp\u003ePutting all jokes aside from towing a Subaru around, this little accent is neat.  It just looks good on your vehicle.  A small customization anyone can do.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes cutout with the word \"TOW\".  Sold as a pair.  Only one is needed.  Keep the other around as a backup.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003cp\u003e\u003cspan face=\"Trebuchet MS\"\u003e\u003cstrong\u003eINSTALLATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eClean the surface of the bumper.  We recommend a dry installation in 70-80 degree weather.  Given those conditions, still park you vehicle in the shade.  You will want to keep a microfiber and detailer around to clean the surface before installation.\u003c\/p\u003e\nPlease watch our video for the full installation, tips, tricks, and more.\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Cz-CKk4E7VU?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Red","offer_id":53986970206508,"sku":"22BRZTOWTOW-RD","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53986970239276,"sku":"22BRZTOWTOW-BL","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986970272044,"sku":"22BRZTOWTOW-GD","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":53986970304812,"sku":"22BRZTOWTOW-GR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986970337580,"sku":"22BRZTOWTOW-OR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":53986970370348,"sku":"22BRZTOWTOW-PI","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986970403116,"sku":"22BRZTOWTOW-PR","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986970435884,"sku":"22BRZTOWTOW-SI","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":53986970468652,"sku":"22BRZTOWTOW-GY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986970501420,"sku":"22BRZTOWTOW-WH","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986970534188,"sku":"22BRZTOWTOW-HB","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986970566956,"sku":"22BRZTOWTOW-HY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Black (Matte)","offer_id":53986970599724,"sku":"22BRZTOWTOW-MB","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Black (Gloss)","offer_id":53986970632492,"sku":"22BRZTOWTOW-GB","price":9.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986970665260,"sku":"22BRZTOWTOW-3DB","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/tow-hook-cover-overlay-with-tow-logo-2022-brz-stickerfab-1.jpg?v=1787933437"},{"product_id":"third-brake-lamp-overlay-2022-brz-gr86","title":"Third Brake Lamp Overlay - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 class=\"product-single__title\" style=\"text-align: center;\" itemprop=\"name\"\u003eThird Brake Lamp Overlay\u003c\/h2\u003e\n\u003cp\u003eContinuing with our smoked out overlays we have made one for the third brake lamp.  This knocks out more red and keeps with the dark theme of other trim pieces at the rear of the vehicle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe imported parts from Japan just to jump on this new platform!\u003cbr\u003e\u003cbr\u003eIt's a great upgrade if you want to transform the rear end of your vehicle.  Looks great in the light and even better at night.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n\u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n\u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e \u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e \u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n\u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrofiber\u003c\/li\u003e\n\u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n\u003cli\u003eSoapy Water \u003c\/li\u003e\n\u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JZTyeuERdmc?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986972467500,"sku":"22BRZ86THIRDBL-DS","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986972500268,"sku":"22BRZ86THIRDBL-LS","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986972533036,"sku":"22BRZ86THIRDBL-ST","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986972565804,"sku":"22BRZ86THIRDBL-GY","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986972598572,"sku":"22BRZ86THIRDBL-HC","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53986972631340,"sku":"22BRZ86THIRDBL-CB","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53986972664108,"sku":"22BRZ86THIRDBL-LX","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/third-brake-lamp-overlay-2022-brz-gr86-stickerfab-1-34437355569471.jpg?v=1787933437"},{"product_id":"seatbelt-trim-protector-3d-carbon-overlays-2022-brz-gr86","title":"Seatbelt Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022 BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSeatbelt Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/seatbelt-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758049926\" alt=\"3D carbon fiber vinyl overlay — Seatbelt Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/seatbelt-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758049927\" alt=\"3D carbon fiber vinyl texture close-up — 2022 BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qWLBwQUTAqo?start=0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986974794028,"sku":"22BRZSBELT-3DB","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/seatbelt-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933486"},{"product_id":"3d-carbon-door-sill-overlay-part-2-upper-2022-brz-gr86","title":"3D Carbon Door Sill Overlay Part 2 (Upper) - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Door Sill Overlay Part 2 (Upper) - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-sill-overlay-part-2-upper-2022-brz-gr86-stickerfab-1.jpg?v=1758050319\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Door Sill Overlay Part 2 (Upper) - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-sill-overlay-part-2-upper-2022-brz-gr86-stickerfab-2.jpg?v=1758050320\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ORcrillfeFM?start=0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986974859564,"sku":"22BRZGR86DSOPT2-3DB","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-door-sill-overlay-part-2-upper-2022-brz-gr86-stickerfab-1.jpg?v=1787933486"},{"product_id":"lower-console-trim-3d-carbon-overlay-2022-brz-gr86","title":"Lower Console Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dimensional carbon-fiber look\u003c\/strong\u003e — an easy styling upgrade that makes the piece stand out from stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eLower Console Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eGive the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e a deep, dimensional carbon-fiber look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/lower-console-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1-34437441978687.jpg?v=1758049933\" alt=\"3D carbon fiber vinyl overlay — Lower Console Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and added protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eA Simple Upgrade With Real Presence\u003c\/h3\u003e\n\u003cp\u003eA little vinyl in the right place makes the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e stand out from any stock car. The 3D Carbon finish has a dimensional, woven carbon look — not a flat printed film — so the piece looks the part up close.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/lower-console-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-2-34437442371903.jpg?v=1758049934\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Manual \/ LHD (US \/ Canada)","offer_id":53986975482156,"sku":"22BRZLWCONLHDMT-3DB","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Manual \/ RHD (Japan \/ UK \/ Australia)","offer_id":53986975514924,"sku":"22BRZLWCONRHDMT-3DB","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Automatic \/ LHD (US \/ Canada)","offer_id":53986975547692,"sku":"22BRZLWCONLHDAT-3DB","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Automatic \/ RHD (Japan \/ UK \/ Australia)","offer_id":53986975580460,"sku":"22BRZLWCONRHDAT-3DB","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/lower-console-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1-34437441978687.jpg?v=1787933486"},{"product_id":"2023-special-edition-style-rear-stripes-fits-2022-brz-gr86","title":"2023 Special Edition Style Rear Stripes fits 2022+ BRZ \/ GR86","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n    \u003cli\u003eEasy to install\u003c\/li\u003e\n    \u003cli\u003eInstructions and installation video available below\u003c\/li\u003e\n    \u003cli\u003eSold as a full driver and passenger side set\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e2023 Special Edition Style Rear Stripes\u003c\/h2\u003e\n\u003cp\u003eWe have sold special edition stripes for the A91 Supra and thought they would look good on the new BRZ \/ GR86 as well.  The proportions of the vehicles are different and when Toyota made the official announcement, we knew we had to try it.\u003c\/p\u003e\n\u003cp\u003eOver 15 tries at it and we found what seems to be the most aesthetically pleasing design in terms of complimenting the natural body lines of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e Sold as a set.  4 total stripes.  2 for driver's side and 2 for passenger side.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eMATERIAL DETAILS\u003c\/h4\u003e\n\u003cp\u003e3D Carbon Dragon Wrap™ Carbon Fiber Film is a 5.6 mil calendared vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.\u003c\/p\u003e\n\u003cp\u003eLasts up to 5 years outdoors.\u003c\/p\u003e\n\u003cp\u003eOther materials are sourced in the USA as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Details:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003eConcept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n    \u003cdiv class=\"leftColumn\"\u003e\n        \u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n        \u003cp\u003eRecommended tools:\u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003e\u003ca href=\"\/products\/felt-lined-squeegee-for-vinyl-application\"\u003eFelt tip squeegee\u003c\/a\u003e\u003c\/li\u003e\n            \u003cli\u003e\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application fluid\u003c\/a\u003e\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eClean the application area and have soapy water available.  Use a drop of dish soap mixed with a full cup of water.  We favor our\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003e StickerFab Application fluid\u003c\/a\u003e even more than soapy water though.\u003c\/p\u003e\n        \u003cp\u003eIdeal installation temperature is 70-80 degrees and not in direct sunlight or wind.  The sunlight may heat up the body panels and\/or vinyl too much.  This causes it to become flimsy and the shape to change easily.\u003c\/p\u003e\n        \u003cp\u003eApply some of the soapy water to the bottom of the vinyl.  It will allow you to slide the vinyl around until you find the proper placement.  It will also aide in removing air bubbles.  \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"rightColumn\"\u003e\n        \u003cdiv class=\"video-container\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/R-E5FanJXsc\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eYou want to get the alignment of the piece so that it contours the fenders.  Start with the larger piece and use the defroster lines on the rear window as a point of reference.  You will want to align the front edge of the larger piece at approximately the sixth defroster lines.  Please see the photos.\u003cbr\u003e\u003cbr\u003eOnce you have to aligned, use your fingers (or a squeegee \/ credit card wrapped in microfiber) to push out the air and water.  To speed up the process of drying you can use light heat from a heat gun or hair dryer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the first piece is aligned, begin to apply the smaller piece.  It will sit behind the larger stripe by approximately 1 5\/16\" (or two fingers).\u003cbr\u003e\u003cbr\u003eRepeat for the other side.\u003c\/span\u003e\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Black (Gloss)","offer_id":53986975777068,"sku":"22GRSESTRIPE-GB","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Black (Matte)","offer_id":53986975809836,"sku":"22GRSESTRIPE-MB","price":28.99,"currency_code":"USD","in_stock":true},{"title":"TRD Style","offer_id":53986975842604,"sku":"22GRSESTRIPE-TRD","price":33.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986975875372,"sku":"22GRSESTRIPE-3DB","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986975908140,"sku":"22GRSESTRIPE-RD","price":28.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986975940908,"sku":"22GRSESTRIPE-WH","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53986975973676,"sku":"22GRSESTRIPE-BL","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986976006444,"sku":"22GRSESTRIPE-OR","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986976039212,"sku":"22GRSESTRIPE-PR","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53986976071980,"sku":"22GRSESTRIPE-YL","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986976104748,"sku":"22GRSESTRIPE-HY","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986976137516,"sku":"22GRSESTRIPE-SI","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Cherry Blossom Pink","offer_id":53986976170284,"sku":"22GRSESTRIPE-CBP","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/2023-special-edition-style-rear-stripes-2022-brz-gr86-stickerfab-1.jpg?v=1787933487"},{"product_id":"fuel-door-3d-carbon-overlay-2022-brz-gr86","title":"Fuel Door 3D Carbon Overlay - 2022 BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dimensional carbon-fiber look\u003c\/strong\u003e — an easy styling upgrade that makes the piece stand out from stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet-install friendly\u003c\/strong\u003e — reposition with StickerFab fluid, then set with light heat for a bubble-free finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022 BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFuel Door 3D Carbon Overlay - 2022 BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eGive the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e a deep, dimensional carbon-fiber look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/fuel-door-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1758049923\" alt=\"3D carbon fiber vinyl overlay — Fuel Door 3D Carbon Overlay - 2022 BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and added protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eA Simple Upgrade With Real Presence\u003c\/h3\u003e\n\u003cp\u003eA little vinyl in the right place makes the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e stand out from any stock car. The 3D Carbon finish has a dimensional, woven carbon look — not a flat printed film — so the piece looks the part up close.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/fuel-door-3d-carbon-overlay-2022-brz-gr86-stickerfab-2.jpg?v=1758049924\" alt=\"3D carbon fiber vinyl texture close-up — 2022 BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. A \u003cstrong\u003ewet install\u003c\/strong\u003e is recommended: spray the surface and the back of the vinyl with StickerFab fluid so you can slide it into place, work out the fluid from the center outward, then set the adhesive with light heat from a hair dryer or heat gun. Work up the heat slowly — if it would burn you, it can burn the material.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003cp style=\"margin: 10px 0 0; color: #444;\"\u003e\u003cstrong\u003eRecommended items:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"margin: 8px 0 0;\"\u003e\u003cli\u003e\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eapplication fluid\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/kJLop9Iqybs?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eIt's a forgiving wet install — reposition with StickerFab fluid, work out the fluid, then set it with light heat.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986976235820,"sku":"22BRZFUEL-3DB","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/fuel-door-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933487"},{"product_id":"push-to-start-trim-3d-carbon-overlay-2022-brz-gr86","title":"Push to Start Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dimensional carbon-fiber look\u003c\/strong\u003e — an easy styling upgrade that makes the piece stand out from stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003ePush to Start Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eGive the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e a deep, dimensional carbon-fiber look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/push-to-start-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1758049919\" alt=\"3D carbon fiber vinyl overlay — Push to Start Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and added protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eA Simple Upgrade With Real Presence\u003c\/h3\u003e\n\u003cp\u003eA little vinyl in the right place makes the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e stand out from any stock car. The 3D Carbon finish has a dimensional, woven carbon look — not a flat printed film — so the piece looks the part up close.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/push-to-start-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-2.jpg?v=1758049920\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/X7O1D_e1FRk?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986976629036,"sku":"22BRZPTS-3DB","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/push-to-start-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933487"},{"product_id":"defroster-vent-3d-carbon-overlays-2022-brz-gr86","title":"Defroster Vent 3D Carbon Overlays - 2022 BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dimensional carbon-fiber look\u003c\/strong\u003e — an easy styling upgrade that makes the piece stand out from stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022 BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDefroster Vent 3D Carbon Overlays - 2022 BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eGive the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e a deep, dimensional carbon-fiber look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/defroster-vent-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758049930\" alt=\"3D carbon fiber vinyl overlay — Defroster Vent 3D Carbon Overlays - 2022 BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and added protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eA Simple Upgrade With Real Presence\u003c\/h3\u003e\n\u003cp\u003eA little vinyl in the right place makes the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e stand out from any stock car. The 3D Carbon finish has a dimensional, woven carbon look — not a flat printed film — so the piece looks the part up close.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/defroster-vent-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758049932\" alt=\"3D carbon fiber vinyl texture close-up — 2022 BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/gy4sxeNwT2I?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986976268588,"sku":"22BRZDEFROSTER-3DB","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/defroster-vent-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933487"},{"product_id":"rear-seat-access-3d-carbon-overlays-left-right-pair-2022-brz-gr86","title":"Rear Seat Access 3D Carbon Overlays (Left \/ Right Pair) - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eRear Seat Access 3D Carbon Overlays (Left \/ Right Pair) - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/rear-seat-access-3d-carbon-overlays-left-right-pair-2022-brz-gr86-stickerfab-1.jpg?v=1758051419\" alt=\"3D carbon fiber vinyl overlay — Rear Seat Access 3D Carbon Overlays (Left \/ Right Pair) - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/rear-seat-access-3d-carbon-overlays-left-right-pair-2022-brz-gr86-stickerfab-2.jpg?v=1758051421\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986980823340,"sku":"22BRZREARACC-3DB","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rear-seat-access-3d-carbon-overlays-left-right-pair-2022-brz-gr86-stickerfab-1.jpg?v=1787933490"},{"product_id":"steering-wheel-controls-lower-spoke-3d-carbon-overlays-2022-brz-gr86","title":"Steering Wheel Controls + Lower Spoke 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSteering Wheel Controls + Lower Spoke 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/steering-wheel-controls-lower-spoke-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758051410\" alt=\"3D carbon fiber vinyl overlay — Steering Wheel Controls + Lower Spoke 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/steering-wheel-controls-lower-spoke-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758051412\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QWG0-TQ0eIc?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986981314860,"sku":"22BRZSTRCNTLWR-3DB","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/steering-wheel-controls-lower-spoke-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933491"},{"product_id":"lower-steering-wheel-spoke-3d-carbon-overlay-2022-brz-gr86","title":"Lower Steering Wheel Spoke 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eLower Steering Wheel Spoke 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/lower-steering-wheel-spoke-3d-carbon-overlay-2022-brz-gr86-stickerfab.jpg?v=1758051408\" alt=\"3D carbon fiber vinyl overlay — Lower Steering Wheel Spoke 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/QWG0-TQ0eIc?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986982297900,"sku":"22BRZGR86LWSPK-3DB","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/lower-steering-wheel-spoke-3d-carbon-overlay-2022-brz-gr86-stickerfab.jpg?v=1787933494"},{"product_id":"rtv-inside-sticker-2022-brz-gr86","title":"RTV Inside Sticker - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eRTV Inside Sticker\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eSo the new platform may have a little issue that has gained a lot of Internet recognition.  If you like stickers, why no mount this one for a little laugh?\u003c\/p\u003e\n\u003cp\u003e4.5\" Sticker\u003cbr\u003eMain width (edge of blue) - 4.5\"\u003cbr\u003eOverall width ~4 3\/4\"\u003c\/p\u003e\n\u003cp\u003e3\" Sticker\u003cbr\u003eMain width (edge of blue) - 2.8\"\u003cbr\u003eOverall width ~ 3\"\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"4.5\"","offer_id":53986982330668,"sku":"rtvinside45","price":1.99,"currency_code":"USD","in_stock":true},{"title":"3\"","offer_id":53986982363436,"sku":"rtvinside30","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rtv-inside-sticker-2022-brz-gr86-stickerfab-34438195609919.png?v=1787933494"},{"product_id":"3d-carbon-door-sill-overlay-part-1-lower-2022-brz-gr86","title":"3D Carbon Door Sill Overlay Part 1 (Lower) - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet-install friendly\u003c\/strong\u003e — reposition with StickerFab fluid, then set with light heat for a bubble-free finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Door Sill Overlay Part 1 (Lower) - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-sill-overlay-part-1-lower-2022-brz-gr86-stickerfab-1.jpg?v=1758050204\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Door Sill Overlay Part 1 (Lower) - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-sill-overlay-part-1-lower-2022-brz-gr86-stickerfab-2.jpg?v=1758050206\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. A \u003cstrong\u003ewet install\u003c\/strong\u003e is recommended: spray the surface and the back of the vinyl with StickerFab fluid so you can slide it into place, work out the fluid from the center outward, then set the adhesive with light heat from a hair dryer or heat gun. Work up the heat slowly — if it would burn you, it can burn the material.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003cp style=\"margin: 10px 0 0; color: #444;\"\u003e\u003cstrong\u003eRecommended items:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"margin: 8px 0 0;\"\u003e\u003cli\u003e\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application Fluid\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NOawgSRotNs?start=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eIt's a forgiving wet install — reposition with StickerFab fluid, work out the fluid, then set it with light heat.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black) \/ 3D Carbon","offer_id":53986983018796,"sku":"22BRZGR86DSOPT1-3DB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ GR86 Neptune","offer_id":53986983051564,"sku":"22GR86DSOPT1-NPT","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ GR86 Red","offer_id":53986983084332,"sku":"22GR86DSOPT1-RD","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ GR86 Track bRed","offer_id":53986983117100,"sku":"22GR86DSOPT1-TBRD","price":22.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ GR86 Orange","offer_id":53986983149868,"sku":"22GR86DSOPT1-OR","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ GR86 White","offer_id":53986983182636,"sku":"22GR86DSOPT-WH","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ STI White","offer_id":53986983215404,"sku":"22STIDSOPT-WH","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ STI Red","offer_id":53986983248172,"sku":"22STIDSOPT-RD","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ BRZ White","offer_id":53986983280940,"sku":"22BRZDSOPT-WH","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black) \/ BRZ Red","offer_id":53986983313708,"sku":"22BRZDSOPT-RD","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-door-sill-overlay-part-1-lower-2022-brz-gr86-stickerfab-1.jpg?v=1787933496"},{"product_id":"outer-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86","title":"Outer AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eOuter AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/outer-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758051450\" alt=\"3D carbon fiber vinyl overlay — Outer AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/outer-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758051451\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987245868,"sku":"22BRZACOUTTRIM-3DB","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/outer-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933547"},{"product_id":"glove-box-3d-carbon-overlay-2022-brz-gr86","title":"Glove Box 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eGlove Box 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/glove-box-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1758051447\" alt=\"3D carbon fiber vinyl overlay — Glove Box 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/glove-box-3d-carbon-overlay-2022-brz-gr86-stickerfab-2.jpg?v=1758051448\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZAM9b_ggkGg?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Left Hand Drive (US and Canada)","offer_id":53986987409708,"sku":"22BRZGRGB3DB-US","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Right Hand Drive (Japan and Australia)","offer_id":53986987442476,"sku":"22BRZGRGB3DB-JAP","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/glove-box-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933547"},{"product_id":"toyota-gr86-emblems-for-weathertech-floor-mats-single","title":"Toyota \"GR86\" Emblems for Weathertech Floor Mats (Single)","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eToyota GR86 Weathertech Floor Mat Emblems\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e Sold\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eINDIVIDUALLY. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMost people will purchase two (2) for front mats.  Rear mats do not have a place for emblems.\u003c\/li\u003e\n\u003cli\u003eTrunk liner uses one (1) emblem.  Purchase three (3) to cover an entire vehicle that is equipped with at least front mats and a trunk liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe have a few vehicles and wanted to make our Weathertech All Weather \/ rubber mats look more at home inside the cars.\u003c\/p\u003e\n\u003cp\u003eThese domed emblems are easy to install. You can get both done in about 2 minutes! Adhesive backed and shipped with a protective layer on top. The look will be similar to the original, but with a much more OEM like logo.\u003c\/p\u003e\n\u003cp\u003eAs more ask for these, we'll start making them for other manufacturers as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFits All WeatherTech FloorLiner and NOT FloorLiner HP\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFloor Mats Sold Separately\u003c\/h3\u003e\n\u003cp\u003ePurchase floor mats \u003ca href=\"https:\/\/www.stickerfab.com\/products\/weathertech-floorliner-floor-mats-2022-subaru-brz-2022-toyota-gr86\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2022+ Toyota GR86\u003c\/span\u003e\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987376940,"sku":"WTGR86","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/toyota-gr86-emblems-for-weathertech-floor-mats-single-stickerfab-1.jpg?v=1787933546"},{"product_id":"manual-shifter-part-1-trim-3d-carbon-overlay-fits-2022-brz-gr86","title":"Manual Shifter Part 1 Trim 3D Carbon Overlay fits 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eManual Shifter Part 1 Trim 3D Carbon Overlay fits 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/manual-shifter-part-1-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1758051441\" alt=\"3D carbon fiber vinyl overlay — Manual Shifter Part 1 Trim 3D Carbon Overlay fits 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/manual-shifter-part-1-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-2.jpg?v=1758051442\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987213100,"sku":"22BRZMTTRIMPT1-3DB","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/manual-shifter-part-1-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933546"},{"product_id":"center-console-side-trim-protector-3d-carbon-overlays-2022-brz-gr86","title":"Center Console Side Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022 BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCenter Console Side Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-console-side-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758051621\" alt=\"3D carbon fiber vinyl overlay — Center Console Side Trim Protector 3D Carbon Overlays - 2022 BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-console-side-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758051623\" alt=\"3D carbon fiber vinyl texture close-up — 2022 BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/ChOxQE6pSVo?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"LHD (US \/ Canada)","offer_id":53986987311404,"sku":"22BRZGRCNTCNSLPT-3DBL","price":27.99,"currency_code":"USD","in_stock":true},{"title":"RHD (Japan \/ UK \/ Australia)","offer_id":53986987344172,"sku":"22BRZGRCNTCNSLPT-3DBR","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/center-console-side-trim-protector-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933546"},{"product_id":"center-cupholder-3d-carbon-overlays-2022-brz-gr86-mt-only","title":"Center Cupholder 3D Carbon Overlays - 2022+ BRZ \/ GR86 MT Only","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-piece set — enough for one vehicle\u003c\/strong\u003e — everything you need in one order, precision-cut to fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86 MT Only\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCenter Cupholder 3D Carbon Overlays - 2022+ BRZ \/ GR86 MT Only\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86 MT Only\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-cupholder-3d-carbon-overlays-2022-brz-gr86-mt-only-stickerfab-1.jpg?v=1758051416\" alt=\"3D carbon fiber vinyl overlay — Center Cupholder 3D Carbon Overlays - 2022+ BRZ \/ GR86 MT Only\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003cp\u003eSold as a 4-piece set — enough to do one whole vehicle.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-cupholder-3d-carbon-overlays-2022-brz-gr86-mt-only-stickerfab-2.jpg?v=1758051418\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86 MT Only\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/9EJnz4Xi6NY?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86 MT Only\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pieces come in the set?\u003c\/strong\u003e\u003cbr\u003e4. One 4-piece set is enough for a single vehicle.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"3D Carbon (Black)","offer_id":53986987573548,"sku":"22BRZCUPHOLDR-3DB","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/center-cupholder-3d-carbon-overlays-2022-brz-gr86-mt-only-stickerfab-1.jpg?v=1787933547"},{"product_id":"fuse-box-cover-3d-carbon-overlay-2022-brz-gr86","title":"Fuse Box Cover 3D Carbon Overlay - 2022 BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022 BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eFuse Box Cover 3D Carbon Overlay - 2022 BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/fuse-box-cover-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1758051637\" alt=\"3D carbon fiber vinyl overlay — Fuse Box Cover 3D Carbon Overlay - 2022 BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/fuse-box-cover-3d-carbon-overlay-2022-brz-gr86-stickerfab-2.jpg?v=1758051639\" alt=\"3D carbon fiber vinyl texture close-up — 2022 BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022 BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987475244,"sku":"22BRZGRFUSEUND-3DB","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/fuse-box-cover-3d-carbon-overlay-2022-brz-gr86-stickerfab-1.jpg?v=1787933546"},{"product_id":"dimmer-and-trunk-switch-trim-3d-carbon-overlays-2022-brz-gr86","title":"Dimmer and Trunk Switch Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes a backup set\u003c\/strong\u003e — every emblem order ships with two identical full sets, one as a spare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDimmer and Trunk Switch Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/dimmer-and-trunk-switch-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758051630\" alt=\"3D carbon fiber vinyl overlay — Dimmer and Trunk Switch Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/dimmer-and-trunk-switch-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758051632\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/tube.rvere.com\/embed?v=hsuLuKQv3JM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\n        \u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get a spare set?\u003c\/strong\u003e\u003cbr\u003eYes — every emblem order includes two identical full sets, one as a backup.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987606316,"sku":"22BRZGRDIMTRUNKSW-3DB","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/dimmer-and-trunk-switch-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933547"},{"product_id":"center-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86","title":"Center AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCenter AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1758051456\" alt=\"3D carbon fiber vinyl overlay — Center AC Vent Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/center-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-2.jpg?v=1758051457\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986987835692,"sku":"22BRZACCENTRIM-3DB","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/center-ac-vent-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1.jpg?v=1787933546"},{"product_id":"speedometer-cluster-3d-carbon-overlay-5-pieces-2022-brz-gr86","title":"Speedometer Cluster 3D Carbon Overlay (5 Pieces) - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSpeedometer Cluster 3D Carbon Overlay (5 Pieces) - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/speedometer-cluster-3d-carbon-overlay-5-pieces-2022-brz-gr86-stickerfab-1-34438456869183.jpg?v=1758053109\" alt=\"3D carbon fiber vinyl overlay — Speedometer Cluster 3D Carbon Overlay (5 Pieces) - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/speedometer-cluster-3d-carbon-overlay-5-pieces-2022-brz-gr86-stickerfab-2-34438457459007.jpg?v=1758053111\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"LHD (US \/ Canada)","offer_id":53986988687660,"sku":"22BRZSPEEDO-3DBL","price":16.99,"currency_code":"USD","in_stock":true},{"title":"RHD (Japan \/ UK \/ Australia)","offer_id":53986988720428,"sku":"22BRZSPEEDO-3DBR","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/speedometer-cluster-3d-carbon-overlay-5-pieces-2022-brz-gr86-stickerfab-1-34438456869183.jpg?v=1787933548"},{"product_id":"cup-holder-trim-3d-carbon-overlays-2022-brz-gr86","title":"Cup Holder Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dimensional carbon-fiber look\u003c\/strong\u003e — an easy styling upgrade that makes the piece stand out from stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCup Holder Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eGive the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e a deep, dimensional carbon-fiber look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/cup-holder-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1-34438500811071.png?v=1758053595\" alt=\"3D carbon fiber vinyl overlay — Cup Holder Trim 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and added protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eA Simple Upgrade With Real Presence\u003c\/h3\u003e\n\u003cp\u003eA little vinyl in the right place makes the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e stand out from any stock car. The 3D Carbon finish has a dimensional, woven carbon look — not a flat printed film — so the piece looks the part up close.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/cup-holder-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-2-34438501073215.png?v=1758053596\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" height=\"315\" width=\"560\" class=\"ui-droppable\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Manual \/ LHD (US \/ Canada)","offer_id":53986989474092,"sku":"22BRZCUPHLDRLHDMT-3DB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Manual \/ RHD (Japan \/ UK \/ Australia)","offer_id":53986989506860,"sku":"22BRZCUPHLDRRHDMT-3DB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Automatic \/ LHD (US \/ Canada)","offer_id":53986989539628,"sku":"22BRZCUPHLDRLHDAT-3DB","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Automatic \/ RHD (Japan \/ UK \/ Australia)","offer_id":53986989572396,"sku":"22BRZCUPHLDRRHDAT-3DB","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/cup-holder-trim-3d-carbon-overlays-2022-brz-gr86-stickerfab-1-34438500811071.jpg?v=1787933551"},{"product_id":"middle-trim-3d-carbon-overlay-2-pieces-2022-brz-gr86","title":"Middle Trim 3D Carbon Overlay (2 Pieces) - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eMiddle Trim 3D Carbon Overlay (2 Pieces) - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/middle-trim-3d-carbon-overlay-2-pieces-2022-brz-gr86-stickerfab-1-34438453985599.jpg?v=1758053102\" alt=\"3D carbon fiber vinyl overlay — Middle Trim 3D Carbon Overlay (2 Pieces) - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/middle-trim-3d-carbon-overlay-2-pieces-2022-brz-gr86-stickerfab-2-34438454509887.jpg?v=1758053104\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" class=\"ui-droppable\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"LHD (US \/ Canada)","offer_id":53986990489900,"sku":"22BRZSHIFT3-3DBL","price":15.99,"currency_code":"USD","in_stock":true},{"title":"RHD (Japan \/ UK \/ Australia)","offer_id":53986990522668,"sku":"22BRZSHIFT3-3DBR","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/middle-trim-3d-carbon-overlay-2-pieces-2022-brz-gr86-stickerfab-1-34438453985599.jpg?v=1787933553"},{"product_id":"outer-shifter-trim-3d-carbon-overlay-2022-brz-gr86","title":"Outer Shifter Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eOuter Shifter Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/outer-shifter-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1-34438388646207.jpg?v=1758052676\" alt=\"3D carbon fiber vinyl overlay — Outer Shifter Trim 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/outer-shifter-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-2-34438389236031.jpg?v=1758052678\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 70–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"LHD (US \/ Canada)","offer_id":53986991407404,"sku":"22BRZSHIFT2-3DBL","price":15.99,"currency_code":"USD","in_stock":true},{"title":"RHD (Japan \/ UK \/ Australia)","offer_id":53986991440172,"sku":"22BRZSHIFT2-3DBR","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/outer-shifter-trim-3d-carbon-overlay-2022-brz-gr86-stickerfab-1-34438388646207.jpg?v=1787933554"},{"product_id":"engine-cover-3d-carbon-overlays-2022-brz-gr86","title":"Engine Cover 3D Carbon Overlays - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eEngine Cover 3D Carbon Overlays - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/engine-cover-3d-carbon-overlays-2022-brz-gr86-stickerfab-1-34438456738111.jpg?v=1758053114\" alt=\"3D carbon fiber vinyl overlay — Engine Cover 3D Carbon Overlays - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/engine-cover-3d-carbon-overlays-2022-brz-gr86-stickerfab-2-34438457098559.jpg?v=1758053115\" alt=\"3D carbon fiber vinyl texture close-up — 2022+ BRZ \/ GR86\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in 75–80°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/hsuLuKQv3JM?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986992193836,"sku":"22BRZENGINE-3DBL","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/engine-cover-3d-carbon-overlays-2022-brz-gr86-stickerfab-1-34438456738111.jpg?v=1787933554"},{"product_id":"logo-overlay-for-trd-gr-aero-stabilizer-2022-brz-gr86","title":"Logo Overlay for TRD GR Aero Stabilizer - 2022+ BRZ \/ GR86","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eLogo Overlay for TRD GR Aero Stabilizer\u003c\/h2\u003e\n\u003cp\u003e This overlay allows you to customize your TRD GR Aero Stabilizer.  For BRZ owners this means changing the logo entirely to one that makes sense.  This product has a clear overlaminate to protect it against UV and light scratches.\u003c\/p\u003e\n\u003cp\u003ePlease \u003ca href=\"https:\/\/www.stickerfab.com\/pages\/contact-us\" target=\"_blank\"\u003econtact us\u003c\/a\u003e for other design requests.\u003c\/p\u003e\n\u003cp\u003eIf you need to purchase a TRD GR Aero Stabilizer, please visit our friends at \u003ca href=\"https:\/\/www.importimageracing.com\/products\/toyota-trd-gr-aero-stabilizer-2022-gr86\" target=\"_blank\"\u003eImport Image Racing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e Sold as a pair.  One for use and one for backup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n\u003cp\u003eRecommended tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application fluid\u003c\/a\u003e or soapy water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the application area and have soapy water available.  Use a drop of dish soap mixed with a full cup of water.  We favor our \u003ca href=\"\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application fluid\u003c\/a\u003e even more than soapy water though.\u003c\/p\u003e\n\u003cp\u003eIdeal installation temperature is 70-80 degrees and not in direct sunlight or wind.  The sunlight may heat up the body panels and\/or vinyl too much.  This causes it to become flimsy and the shape to change easily.\u003c\/p\u003e\n\u003cp\u003eApply some of the soapy water to the bottom of the vinyl.  It will allow you to slide the vinyl around until you find the proper placement.  It will also aide in removing air bubbles.   \u003c\/p\u003e\n\u003cp\u003ePush the remaining soapy water or application fluid out with your fingers.  Allow to dry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Black Background \/ Cherry Blossom \"STI\"","offer_id":53986992587052,"sku":"sfb22BRZAEROLG-STIBBCB","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/logo-overlay-for-trd-gr-aero-stabilizer-2022-brz-gr86-stickerfab-1.png?v=1787933556"},{"product_id":"rear-seat-center-console-3d-carbon-overlay-2022-brz-gr86","title":"Rear Seat Center Console 3D Carbon Overlay - 2022+ BRZ \/ GR86","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2022+ BRZ \/ GR86\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eRear Seat Center Console 3D Carbon Overlay - 2022+ BRZ \/ GR86\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/rear-seat-center-console-3d-carbon-overlay-2022-brz-gr86-stickerfab.jpg?v=1758051635\" alt=\"3D carbon fiber vinyl overlay — Rear Seat Center Console 3D Carbon Overlay - 2022+ BRZ \/ GR86\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe class=\"ui-droppable\" src=\"https:\/\/www.youtube.com\/embed\/ChOxQE6pSVo?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2022+ BRZ \/ GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986994192684,"sku":"22BRZGRRCNTCNSL-3DB","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rear-seat-center-console-3d-carbon-overlay-2022-brz-gr86-stickerfab.jpg?v=1787933559"}],"url":"https:\/\/lee-mods.com\/collections\/toyota-gr86-subaru-brz.oembed","provider":"Lee Mods inc.","version":"1.0","type":"link"}