{"title":"Toyota Supra","description":"\u003cp\u003eShop Toyota Supra graphics, interior trim, lighting, protection, emblems, and styling accessories.\u003c\/p\u003e","products":[{"product_id":"3d-carbon-door-trim-overlay-garnish-protector-2020-supra","title":"3D Carbon Door Trim Overlay \/ Garnish \/ Protector - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet-install friendly\u003c\/strong\u003e — reposition with StickerFab fluid, then set with light heat for a bubble-free finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Door Trim Overlay \/ Garnish \/ Protector - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-trim-overlay-garnish-protector-2020-supra-stickerfab-1.jpg?v=1758047585\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Door Trim Overlay \/ Garnish \/ Protector - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-trim-overlay-garnish-protector-2020-supra-stickerfab-2.jpg?v=1758047586\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. A \u003cstrong\u003ewet install\u003c\/strong\u003e is recommended: spray the surface and the back of the vinyl with StickerFab fluid so you can slide it into place, work out the fluid from the center outward, then set the adhesive with light heat from a hair dryer or heat gun. Work up the heat slowly — if it would burn you, it can burn the material.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003cp style=\"margin: 10px 0 0; color: #444;\"\u003e\u003cstrong\u003eRecommended items:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"margin: 8px 0 0;\"\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.stickerfab.com\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application Fluid\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eIt's a forgiving wet install — reposition with StickerFab fluid, work out the fluid, then set it with light heat.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986889531692,"sku":"SFBA90EXDRTRM3DBK","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-door-trim-overlay-garnish-protector-2020-supra-stickerfab-1.jpg?v=1787932937"},{"product_id":"gr-supra-emblem-inserts-for-weathertech-floor-mats-single-2020-supra","title":"GR Supra Emblem Inserts for Weathertech Floor Mats (Single) - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces the stock Weathertech logo\u003c\/strong\u003e with a GR Supra-specific emblem insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 styles:\u003c\/strong\u003e Full Color, Red on Black Acrylic, Silver on Black Acrylic, Black Acrylic, Metal Etched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — most owners buy 2 for front mats, 3 to include trunk liner\u003c\/li\u003e\n\u003cli\u003ePre-applied adhesive — presses directly onto the factory logo location\u003c\/li\u003e\n\u003cli\u003eInstall in 70°F+ weather, bond builds over 24 hours\u003c\/li\u003e\n\u003cli\u003eFits any Weathertech FloorLiner with the standard logo cutout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\n\u003ch2 style=\"text-align:center;\"\u003eGR Supra Emblem Inserts for Weathertech Floor Mats — 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align:center;color:#555;margin-bottom:32px;\"\u003eSwap the generic Weathertech logo for a GR Supra emblem that actually belongs in your car.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/DSC00669.jpg?v=1769779481\" alt=\"GR Supra Weathertech floor mat emblem inserts installed\" style=\"width:100%;border-radius:6px;display:block;margin-bottom:24px;\"\u003e\n\n\u003ch3 style=\"margin:0 0 12px;\"\u003eThe Detail That Finishes the Interior\u003c\/h3\u003e\n\u003cp\u003eWeathertech FloorLiners are the go-to floor mat for Supra owners who actually care about their interior — but the stock Weathertech logo isn't exactly on-brand for a GR Supra. These emblem inserts press right into the existing logo cutout and replace the generic badge with a GR Supra-specific design that matches your car.\u003c\/p\u003e\n\u003cp\u003eSold individually. Most owners pick up two for the front mats. If you have a trunk liner with the logo cutout, grab three to cover the full set. Pre-applied adhesive, clean install — no tools, no mess.\u003c\/p\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin-bottom:40px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width:50%;padding:0 8px 0 0;vertical-align:top;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/DSC00454.jpg?v=1769779481\" alt=\"GR Supra Weathertech emblem close up\" style=\"width:100%;border-radius:6px;display:block;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;padding:0 0 0 8px;vertical-align:top;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/DSC00668.jpg?v=1769779481\" alt=\"GR Supra floor mat emblem installed\" style=\"width:100%;border-radius:6px;display:block;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin-bottom:40px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width:50%;vertical-align:middle;padding:0 24px 0 0;\"\u003e\n  \u003ch3 style=\"margin:0 0 12px;\"\u003e5 Style Options\u003c\/h3\u003e\n  \u003cul style=\"margin:0;padding-left:20px;color:#333;\"\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n\u003cstrong\u003eFull Color\u003c\/strong\u003e — vibrant printed GR Supra logo, closest to OEM badge appearance\u003c\/li\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n\u003cstrong\u003eRed on Black Acrylic (Matte)\u003c\/strong\u003e — red GR Supra lettering on matte black acrylic base\u003c\/li\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n\u003cstrong\u003eSilver on Black Acrylic (Matte)\u003c\/strong\u003e — silver lettering on matte black base, understated and clean\u003c\/li\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n\u003cstrong\u003eBlack Acrylic\u003c\/strong\u003e — all-black for a stealth blacked-out interior look\u003c\/li\u003e\n    \u003cli style=\"margin-bottom:0;\"\u003e\n\u003cstrong\u003eMetal Etched\u003c\/strong\u003e — premium etched metal finish for a high-end OEM+ appearance\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;vertical-align:middle;padding:0 0 0 8px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/DSC09589_450b2793-f2f0-4bec-a6f5-eb03bfaaa3da.jpg?v=1769779481\" alt=\"GR Supra Weathertech emblem style options\" style=\"width:100%;border-radius:6px;display:block;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin-bottom:40px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width:50%;padding:0 8px 0 0;vertical-align:top;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/DSC00192.jpg?v=1769779481\" alt=\"GR Supra emblem on Weathertech mat front\" style=\"width:100%;border-radius:6px;display:block;\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;padding:0 0 0 8px;vertical-align:top;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/47D96A8C-46A4-43B1-BC19-0608F5FEF8E6.png?v=1769779481\" alt=\"GR Supra Weathertech emblem detail\" style=\"width:100%;border-radius:6px;display:block;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\n\n\n\n\n\u003chr style=\"margin:40px 0;border:none;border-top:1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align:center;margin-bottom:24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 24px 20px 0;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e\u003cbr\u003eMost owners buy 2 for the front floor mats. If you have a Weathertech trunk liner with a logo cutout, pick up 3 to cover the full set. Rear floor mats typically don't have a logo slot.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 0 20px 8px;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWill this fit my Weathertech FloorLiners?\u003c\/strong\u003e\u003cbr\u003eYes — these are designed to fit the standard Weathertech FloorLiner logo cutout. Works with any Weathertech mat that has the logo slot, across all Supra model years (2020+).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 24px 20px 0;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eCan I remove it later?\u003c\/strong\u003e\u003cbr\u003eYes — the emblem uses adhesive designed for the logo slot surface. It can be removed, though the Weathertech logo underneath may show some adhesive residue depending on how long it was installed.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 0 20px 8px;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWhich style looks the most OEM?\u003c\/strong\u003e\u003cbr\u003eFull Color is the closest to an OEM badge appearance. Metal Etched gives the most premium, high-end look. Red on Black is the most popular for owners who want contrast with a dark mat.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 24px 0 0;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDoes it work on Weathertech trunk liners?\u003c\/strong\u003e\u003cbr\u003eYes — if your trunk liner has the standard Weathertech logo cutout, this emblem fits it. Most owners with a trunk liner buy one emblem specifically for it.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width:50%;vertical-align:top;padding:0 0 0 8px;\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWhy install at 70°F+?\u003c\/strong\u003e\u003cbr\u003eThe pre-applied adhesive bonds best in warm conditions. Cold temperatures slow the cure time and can weaken the initial bond. Give it 24 hours to fully set before putting the mat through regular use.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Full Color","offer_id":53986889629996,"sku":"A90WTMATLOGO","price":8.5,"currency_code":"USD","in_stock":true},{"title":"Red on Black Acrylic (Matte)","offer_id":53986889662764,"sku":"A90WTMATLOGO-RD","price":8.5,"currency_code":"USD","in_stock":true},{"title":"Silver on Black Acrylic (Matte)","offer_id":53986889695532,"sku":"A90WTMATLOGO-SI","price":8.5,"currency_code":"USD","in_stock":true},{"title":"Black Acrylic","offer_id":53986889728300,"sku":"A90WTMATLOGO-BK","price":8.5,"currency_code":"USD","in_stock":true},{"title":"Metal Etched","offer_id":53986889761068,"sku":"A90WTMATLOGO-ME","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/DSC00669.jpg?v=1787932938"},{"product_id":"real-carbon-supra-steering-wheel-trim-overlay-lower-2020-supra","title":"Real Carbon \"Supra\" Steering Wheel Trim Overlay (Lower) - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n  \u003cli\u003eReal carbon fiber lower steering wheel trim overlay for 2020+ Supra\u003c\/li\u003e\n  \u003cli\u003eReplaces the dull plastic \"Supra\" badge area with a high-gloss carbon piece\u003c\/li\u003e\n  \u003cli\u003ePre-shaped to match the factory contour — no fitment guesswork\u003c\/li\u003e\n  \u003cli\u003e3M automotive adhesive backing, no disassembly required\u003c\/li\u003e\n  \u003cli\u003eHigh-gloss UV-stable clear coat keeps the weave sharp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\n\u003ch2 style=\"text-align: center;\"\u003eReal Carbon Fiber Lower Steering Wheel Trim for 2020+ Toyota Supra\u003c\/h2\u003e\n\n\u003cp\u003eThe lower spoke \"Supra\" badge area on the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e wheel is one of the cheapest-feeling pieces in an otherwise serious cockpit. This real carbon fiber overlay drops directly over it and instantly lifts the whole interior.\u003c\/p\u003e\n\n\u003cp\u003eIt is real twill carbon fiber, hand-laid, with a high-gloss UV-stable clear coat — no hydro-dip, no print. The piece is pre-shaped to the factory contour and installs with 3M automotive adhesive, so you peel, align, and press without removing the airbag or any wheel components.\u003c\/p\u003e\n\n\u003cp\u003ePair it with our other Supra carbon trim pieces for a fully sorted interior. Fast US shipping from StickerFab.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaterial - Real 2x2 twill carbon fiber\u003cbr\u003e\nFinish - High-gloss UV-stable clear coat\u003cbr\u003e\nInstall - 3M adhesive overlay, no disassembly\u003cbr\u003e\nCoverage - Lower steering wheel \"Supra\" trim\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020+ Toyota GR Supra (A90 \/ A91)\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this easy to install?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Clean the area with alcohol, peel the backing, line up the piece, and press it firmly. About 5 minutes total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this damage my Supra steering wheel?\u003c\/strong\u003e\u003cbr\u003eA: No. It bonds to the existing trim and removes with mild heat if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is it real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eA: Yes — hand-laid 2x2 twill weave with a clearcoat. Not hydro-dip or vinyl.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will airbag deployment be affected?\u003c\/strong\u003e\u003cbr\u003eA: No. The overlay is on the lower spoke trim, not over or near the airbag area.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986903130412,"sku":"A90CFSTRWHL","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/real-carbon-supra-steering-wheel-trim-overlay-lower-2020-supra-stickerfab-1.jpg?v=1787933238"},{"product_id":"dark-smoke-sidemarker-overlays-2020-supra","title":"Dark Smoke Sidemarker Overlays - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eDark Smoke Sidemarker Overlays\u003c\/h2\u003e\n\u003cp\u003eSticker Fab has distributed over 20,000 vinyl products in the last few years! This new platform will be a great canvas for their accents and protection items.\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan\u003eSold as a set of four (left front \/ right front \/ left rear \/ right rear). \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eKnock out the orange and red sidemarker with some dark smoke overlays.  The material used to craft these is made in Germany and a standard across the industry for darkening headlights, tail lights, and other lamps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003cp\u003eNOTE: The longer sidemarker overlays are for the rear.\u003c\/p\u003e\n\u003cp\u003eClean the application area and make sure it is clear of any dirt, debris, and ideally wax. Having a hair dryer or heat gun handy can aide in installation, but we've been able to install this without either in the middle of winter. Start at the top of the sidemarker, align the vinyl there and work your way toward the bottom. You can use a wet installation if you want, however this is also not required. When you do not use a wet installation you need to be sure there is absolutely no dirt or it will get stuck in between the sidemarker and vinyl with no way out. The hair dryer or heat gun would be used to dry out the water after install. Just make sure that it is not too hot of air. If it can burn you it is probably too hot for drying out the vinyl.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/D3Tmdic53Hg?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986903916844,"sku":"SFBA90SMDS","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/dark-smoke-sidemarker-overlays-2020-supra-stickerfab-1.jpg?v=1787933237"},{"product_id":"clear-rock-guard-door-cup-protectors-2020-supra","title":"Clear Rock Guard Door Cup Protectors - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n  \u003cli\u003eClear urethane door cup protectors for the 2020+ Toyota Supra\u003c\/li\u003e\n  \u003cli\u003eStops paint damage from fingernails, rings, and key fobs at the door handle\u003c\/li\u003e\n  \u003cli\u003ePre-cut to the exact Supra door cup geometry — no trimming\u003c\/li\u003e\n  \u003cli\u003eSelf-healing top layer hides micro-scratches with heat\u003c\/li\u003e\n  \u003cli\u003eOptically clear so the factory paint shows through completely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\n\u003ch2 style=\"text-align: center;\"\u003eClear Door Cup Rock Guard Protectors for 2020+ Toyota Supra\u003c\/h2\u003e\n\n\u003cp\u003eDaily fingernail and ring scratches around the door handle on the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e are inevitable — until you cover them. These clear rock guard door cup protectors are pre-cut for the Supra door cup contour, so they install flush and disappear once they are down.\u003c\/p\u003e\n\n\u003cp\u003eThe film is a true paint protection film — self-healing top layer, hydrophobic, and yellow-resistant. Install is a wet-set: spray, line up, squeegee, done. Comes off cleanly years later if you ever need to swap them.\u003c\/p\u003e\n\n\u003cp\u003eA near-invisible upgrade that protects one of the highest-wear spots on the car. Made and shipped from our Florida shop.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaterial - Self-healing automotive PPF urethane\u003cbr\u003e\nCoverage - Both door cups (driver + passenger)\u003cbr\u003e\nClarity - Optically clear, non-yellowing\u003cbr\u003e\nInstall - Pre-cut, wet-set with included instructions\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020+ Toyota GR Supra (A90 \/ A91)\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this easy to install?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Use soapy water as a slip solution, lay the film, squeegee out the water and bubbles. About 10 minutes per side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this damage my Supra paint?\u003c\/strong\u003e\u003cbr\u003eA: No. It is automotive PPF urethane, designed specifically to bond to OEM clearcoat and remove cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will it yellow over time?\u003c\/strong\u003e\u003cbr\u003eA: No. The film uses a non-yellowing top coat designed to stay clear for years of UV exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I see it once installed?\u003c\/strong\u003e\u003cbr\u003eA: Barely — that is the point. From a step back the door cups look like bare paint.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986903687468,"sku":"A90DCPCRG","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/clear-rock-guard-door-cup-protectors-2020-supra-stickerfab-1.jpg?v=1787933237"},{"product_id":"special-edition-sidemarker-overlays-2020-supra","title":"Special Edition Sidemarker Overlays - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003eSpecial Edition Sidemarker Overlays\u003c\/h2\u003e\n\u003cp\u003eSticker Fab has distributed over 20,000 vinyl products in the last few years! This new platform will be a great canvas for their accents and protection items.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSold as a set of four (left front \/ right front \/ left rear \/ right rear). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eKnock out the orange and red sidemarker with some dark smoke overlays.  These special edition items are crafted from material made in the USA.  They are ultra high quality, but a little expensive.  No worries because these patterns are custom cut by StickerFab so installation is rather easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDark Smoke Stealth\u003c\/strong\u003e - Just like normal dark smoke, but with air egress channels for easy install and a matte appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eDark Smoke Carbon\u003c\/strong\u003e - Carbon fiber appearance, but with air egress channels and lets light shine through.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDark Smoke Honeycomb\u003c\/strong\u003e - Dark gloss appearance, when light is reflected off of the reflector, you will be able to see the honeycomb weave.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDark Smoke Galaxy\u003c\/strong\u003e - Gloss appearance with a heavy saturation of pearl effect.  Emits various colors when reflecting light.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"leftColumn\"\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The longer sidemarker overlays are for the rear.\u003c\/p\u003e\n\u003cp\u003eClean the application area and make sure it is clear of any dirt, debris, and ideally wax. Having a hair dryer or heat gun handy can aide in installation, but we've been able to install this without either in the middle of winter. Start at the top of the sidemarker, align the vinyl there and work your way toward the bottom. You can use a wet installation if you want, however this is also not required. When you do not use a wet installation you need to be sure there is absolutely no dirt or it will get stuck in between the sidemarker and vinyl with no way out. The hair dryer or heat gun would be used to dry out the water after install. Just make sure that it is not too hot of air. If it can burn you it is probably too hot for drying out the vinyl.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rightColumn\"\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/D3Tmdic53Hg?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke Carbon Fiber","offer_id":53986904310060,"sku":"A90SMDSCB","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986904342828,"sku":"A90SMDSCB","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986904375596,"sku":"A90SMDSHC","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986904408364,"sku":"A90SMDSG","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-sidemarker-overlays-2020-supra-stickerfab-1.jpg?v=1787933238"},{"product_id":"special-edition-tail-light-overlay-top-2020-supra","title":"Special Edition Tail Light Overlay (Top) - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 style=\"text-align: center;\"\u003e Special Edition Tail Light Overlay (Top)\u003c\/h2\u003e\n\u003cp\u003eIn general people like the stock tail lights in the new Supra. Of course there are those that want heritage style lamps, but that's besides the point. You can change the look up with subtle mods if you want it to look a little less stock. These overlays go on the top of the lamp and give it a dark appearance. They are made by Sticker Fab who is a US based company that has been creating designs for late model vehicles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e  Please view all of our images.  Honeycomb and stealth images are just there to represent what the material looks like.  Not actual photos of the template you will be receiving.\u003c\/p\u003e\n\u003cp\u003eThe design is thoughtful and not only satisfies a need for aesthetic appeal, but is also easier to install on curved surfaces. You don't have to be an expert in wrapping a car to apply these.\u003cbr\u003e\u003cbr\u003eSpecial edition materials like Stealth, Carbon, and Honeycomb are made the USA and cut here as well.  Super high quality material that is not cheap and not as easy for companies like us to cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLATION NOTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean the application area and make sure it is clear of any dirt, debris, and ideally wax. Having a hair dryer or heat gun handy can aide in installation, but we've been able to install this without either in the middle of winter. Open the trunk to be able to view the entire tail light. Note the layout of the tail light and the overlay. Start in the middle and apply it completely to one side and then the other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke Carbon Fiber","offer_id":53986905653548,"sku":"A90TLTOP3DDS","price":52.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986905686316,"sku":"A90TLTOPST","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986905719084,"sku":"A90TLTOP3DHC","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986905751852,"sku":"A90TLTOPDSG","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-tail-light-overlay-top-2020-supra-stickerfab-1.jpg?v=1787933239"},{"product_id":"a91-style-supra-rear-decklid-stripes-2020-supra","title":"A91 Style Supra Rear Decklid Stripes - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003cp\u003eSticker Fab has distributed over 20,000 vinyl products in the last few years! This new platform will be a great canvas for their accents and protection items.\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eYou'll have your vehicle looking closer to a special edition A91 Supra in no time.  These are ultra easy to install and will last for a long time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e Sold as a set.  4 total stripes.  2 for driver's side and 2 for passenger side.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eMATERIAL DETAILS\u003c\/h4\u003e\n\u003cp\u003e3D Carbon Dragon Wrap™ Carbon Fiber Film is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.\u003c\/p\u003e\n\u003cp\u003eLasts up to 5 years outdoors.\u003c\/p\u003e\n\u003cp\u003eOther materials are sourced in the USA as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Details:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConcept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.\u003c\/p\u003e\n\u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n\u003cp\u003eRecommended tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/felt-lined-squeegee-for-vinyl-application\" data-mce-href=\"\/products\/felt-lined-squeegee-for-vinyl-application\"\u003eFelt tip squeegee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/stickerfab-515.myshopify.com\/products\/stickerfab-installation-fluid-bottle-50ml\" data-mce-href=\"https:\/\/stickerfab-515.myshopify.com\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application fluid\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the application area and have soapy water available.  Use a drop of dish soap mixed with a full cup of water.\u003c\/p\u003e\n\u003cp\u003eApply some of the soapy water to the bottom of the vinyl.  It will allow you to slide the vinyl around until you find the proper placement.  It will also aide in removing air bubbles.  \u003cbr\u003e\u003cspan\u003e\u003cbr\u003eYou want to get the alignment of the piece so that it contours the fenders.  Start with the larger piece and use the defroster lines on the rear window as a point of reference.  You will want to align the front edge of the larger piece at approximately the fourth defroster lines.  Please see the photos.\u003cbr\u003e\u003cbr\u003eOnce you have to aligned, use your fingers (or a squeegee \/ credit card wrapped in microfiber) to push out the air and water.  To speed up the process of drying you can use light heat from a heat gun or hair dryer.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the first piece is aligned, begin to apply the smaller piece.  It will sit behind the larger stripe by approximately 1.5\".\u003cbr\u003e\u003cbr\u003eRepeat for the other side.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Black (Gloss)","offer_id":53986905784620,"sku":"A91DECKSTPGB","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Black (Matte)","offer_id":53986905817388,"sku":"A91DECKSTPMB","price":33.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986905850156,"sku":"A91DECKSTP3DBK","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986905882924,"sku":"A91DECKSTPRD","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986905915692,"sku":"A91DECKSTPOR","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986905948460,"sku":"A91DECKSTPPR","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986905981228,"sku":"A91DECKSTPPRGD","price":33.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986906013996,"sku":"A91DECKSTPPRWH","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/a91-style-supra-rear-decklid-stripes-2020-supra-stickerfab-1.jpg?v=1787933238"},{"product_id":"3d-carbon-passenger-side-dash-interior-overlay-2020-supra","title":"3D Carbon Passenger Side Dash Interior Overlay - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Passenger Side Dash Interior Overlay - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-passenger-side-dash-interior-overlay-2020-supra-stickerfab-1.jpg?v=1758048329\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Passenger Side Dash Interior Overlay - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-passenger-side-dash-interior-overlay-2020-supra-stickerfab-2.jpg?v=1758048330\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Black with White Outline","offer_id":53986906571052,"sku":"A90DASH3D","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Black with Red Outline","offer_id":53986906603820,"sku":"A90DASH3D-2","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-passenger-side-dash-interior-overlay-2020-supra-stickerfab-1.jpg?v=1787933245"},{"product_id":"3d-carbon-door-cup-protectors-2020-supra","title":"3D Carbon Door Cup Protectors - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Door Cup Protectors - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-cup-protectors-2020-supra-stickerfab-1.jpg?v=1758048300\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Door Cup Protectors - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-door-cup-protectors-2020-supra-stickerfab-2.jpg?v=1758048304\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"text-align:center;\"\u003eInstallation Video\u003c\/h3\u003e\n\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:0.5em auto 40px;max-width:70%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Zslx1amDxW4?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986907324716,"sku":"A90DCP3DBK","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-door-cup-protectors-2020-supra-stickerfab-1.jpg?v=1787933249"},{"product_id":"brake-caliper-stickers-high-temp-2020-supra","title":"Brake Caliper Stickers (High Temp) - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 align=\"center\"\u003eBrake Caliper Logo Overlays for Toyota Supra\u003c\/h2\u003e\n\u003cp\u003eThe GR Supra is equipped with some nice Brembo brakes. While they are painted in most applications, a logo was omitted. However, with this high temperature resistant 3M vinyl you can fix that. They are made by Sticker Fab who is a US based company that has been creating designs for late model vehicles.\u003cbr\u003e\u003cbr\u003eSold as a pair.\u003c\/p\u003e\n\u003ch4\u003eMATERIAL DETAILS\u003c\/h4\u003e\n\u003cp\u003eGenuine 3M material.\u003c\/p\u003e\n\u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n\u003cp\u003eClean the application area and make sure it is clear of any dirt and debris. Removing the wheel is not necessary in many cases. Make sure the vinyl sticks to the transfer paper and take it off of the paper backing. Evenly apply it to the clean brake caliper. Press down firmly and remove the transfer tape.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"White","offer_id":53986907619628,"sku":"A90BRKCALWH","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53986907652396,"sku":"A90BRKCALBK","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/brake-caliper-stickers-high-temp-2020-supra-stickerfab-1.jpg?v=1787933250"},{"product_id":"special-edition-aftermarket-f1-overlay-2020-supra","title":"Special Edition Aftermarket F1 Overlay - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial edition vinyl overlays for the \u003cstrong\u003eOLM aftermarket F1 \/ any aftermarket lamp with a flat lens \u003c\/strong\u003eon the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 premium overlay options: Dark Smoke Carbon Fiber, Dark Smoke Stealth, Dark Smoke Honeycomb\u003c\/li\u003e\n\u003cli\u003eBuilt-in air egress channels — prevents air bubble trapping during install\u003c\/li\u003e\n\u003cli\u003eEvery material allows ample light to pass through — not a blackout\u003c\/li\u003e\n\u003cli\u003eMade and cut in the USA from premium specialty material\u003c\/li\u003e\n\u003cli\u003eNo professional wrapping experience required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTake Your OLM F1 Supra Lights to the Next Level\u003c\/h2\u003e\n\u003cp\u003eOLM produced the first round of aftermarket F1-style rear lamps for the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e — and if you already have them, or you want something more than the standard look, these \u003cstrong\u003eSpecial Edition overlays\u003c\/strong\u003e are how you finish the build. Three distinct premium materials: \u003cstrong\u003eDark Smoke Carbon Fiber\u003c\/strong\u003e for a high-end textured look, \u003cstrong\u003eDark Smoke Stealth\u003c\/strong\u003e for a clean blacked-out appearance, and \u003cstrong\u003eDark Smoke Honeycomb\u003c\/strong\u003e for a performance-inspired geometric pattern. Every option darkens the lens while still allowing full light transmission — these are overlays, not blackouts.\u003c\/p\u003e\n\u003cp\u003eEach material is made and cut in the USA. These are specialty materials — not cheap film — and they show it in person. Built-in air egress channels in the adhesive make installation forgiving even without wrapping experience. Center the overlay, work from the middle out, and the channels handle the rest.\u003c\/p\u003e\n\u003ch3\u003eOverlay Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Smoke Carbon Fiber\u003c\/strong\u003e — textured carbon fiber weave pattern with dark smoke tint. Premium look, higher price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Smoke Stealth\u003c\/strong\u003e — clean, uniform dark smoke with no pattern. Subtle and sleek.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Smoke Honeycomb\u003c\/strong\u003e — geometric honeycomb pattern with dark smoke tint. Performance-focused appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the lens surface thoroughly — remove all dirt, debris, and wax residue\u003c\/li\u003e\n\u003cli\u003eCenter the overlay over the lens before pressing down\u003c\/li\u003e\n\u003cli\u003eSlowly press down from the center of the overlay while keeping the edges lifted\u003c\/li\u003e\n\u003cli\u003eOnce you're confident in the alignment, push air out from the center toward the edges\u003c\/li\u003e\n\u003cli\u003eThe built-in air egress channels prevent bubbles from getting trapped\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eOLM aftermarket F1-style rear lamps\u003c\/strong\u003e for the 2020+ Toyota GR Supra A90. Also fits any aftermarket brake lamp with a \u003cstrong\u003eflat lens\u003c\/strong\u003e. Not designed for factory Supra tail lights.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo these work with factory Supra tail lights?\u003c\/strong\u003e\u003cbr\u003eNo — these are cut specifically for the OLM aftermarket F1-style lamps. The lens shape and dimensions are different from the factory lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these block light output?\u003c\/strong\u003e\u003cbr\u003eNo — all three materials allow ample light to pass through. They darken the lens appearance without blocking the actual light function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need wrapping experience to install these?\u003c\/strong\u003e\u003cbr\u003eNo — the built-in air egress channels in the adhesive make the install forgiving. Center it, press from the middle out, and the channels prevent bubbles from trapping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Stealth and Carbon Fiber?\u003c\/strong\u003e\u003cbr\u003eStealth is a clean, uniform dark film with no texture — pure blacked-out look. Carbon Fiber has a woven texture that catches light differently and gives the lens a more premium, layered appearance. Carbon Fiber is priced higher because the material itself is more expensive to cut.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke Carbon Fiber","offer_id":53986912796972,"sku":"A90F1DSCB","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53986912829740,"sku":"A90F1DSST","price":16.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53986912862508,"sku":"A90F1DSHC","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53986912895276,"sku":"A90F1DSG","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/special-edition-aftermarket-f1-overlay-2020-supra-stickerfab-1-34437263655231.jpg?v=1787933301"},{"product_id":"dark-smoke-tail-light-overlays-top-2020-supra","title":"Dark Smoke Tail Light Overlays (Top) - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eDark smoke vinyl overlay for the \u003cstrong\u003etop portion of the factory tail lights\u003c\/strong\u003e on the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDarkens the upper section of the tail light for a subtle, less-stock appearance\u003c\/li\u003e\n\u003cli\u003eWet install — soapy water method for easy alignment and repositioning\u003c\/li\u003e\n\u003cli\u003eOpen the trunk for full lamp visibility during install\u003c\/li\u003e\n\u003cli\u003eMade in the USA by StickerFab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSubtle Dark Smoke for the Top of Your Supra's Tail Lights\u003c\/h2\u003e\n\u003cp\u003eMost people like the factory tail lights on the \u003cstrong\u003e2020+ Toyota GR Supra A90\u003c\/strong\u003e — they work well as-is. But if you want to dial back the stock look without going full heritage lamps, these dark smoke overlays for the top portion of the tail light are the right move. They darken the upper section and give the rear end a slightly more aggressive, less factory appearance without changing the fundamental design.\u003c\/p\u003e\n\u003cp\u003eCovers the top of the lamp only — not the full tail light. Wet install recommended for this piece; the curved surface benefits from the soapy water method which lets you reposition the vinyl as you align it. Tip: open the trunk before starting so you have full visibility of the lamp from both sides. Made in the USA.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the tail light surface thoroughly — remove all dirt, debris, and wax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen the trunk\u003c\/strong\u003e — this gives you full visibility of the entire lamp during install\u003c\/li\u003e\n\u003cli\u003eMix soapy water (1 drop of dish soap in a cup of water — mostly water)\u003c\/li\u003e\n\u003cli\u003eApply the soapy water to the back of the overlay and the tail light surface\u003c\/li\u003e\n\u003cli\u003eStart from the center and work completely to one side, then the other\u003c\/li\u003e\n\u003cli\u003ePush water and air bubbles out from center to edges using firm finger pressure\u003c\/li\u003e\n\u003cli\u003eA hair dryer or heat gun can help with adhesion, but not required — this has been installed in winter without one\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits: 2020+ Toyota GR Supra A90 (all trims). Covers the top portion of the factory tail light.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cover the entire tail light or just the top?\u003c\/strong\u003e\u003cbr\u003eJust the top portion. It darkens the upper section of the lamp. For the full tail light, see other Supra overlay listings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this affect brake light or turn signal visibility?\u003c\/strong\u003e\u003cbr\u003eThe dark smoke material reduces lens brightness but does not block light function. The tail light remains fully visible in daylight and at night — it's a tint, not a blackout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy open the trunk during install?\u003c\/strong\u003e\u003cbr\u003eOpening the trunk gives you a clear view of the full lamp from behind the bodywork, making it much easier to align the overlay correctly from the start rather than guessing from the outside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heat gun?\u003c\/strong\u003e\u003cbr\u003eNo — this has been installed without one even in cold weather. A hair dryer or heat gun helps with adhesion and drying the soapy water faster, but it's optional.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986914271532,"sku":"A90TLTOPTNTDS","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/dark-smoke-tail-light-overlays-top-2020-supra-stickerfab-1-34437263589695.jpg?v=1787933302"},{"product_id":"smoked-or-red-aftermarket-f1-overlay-2020-supra","title":"Smoked or Red Aftermarket F1 Overlay - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eVinyl overlays for the \u003cstrong\u003eOLM F1 \/ rear lamps\u003c\/strong\u003e on the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e — also fits any aftermarket brake lamp with a flat lens\u003c\/li\u003e\n\u003cli\u003e3 options: Dark Smoke, Light Smoke, Red\u003c\/li\u003e\n\u003cli\u003eLight smoke is approximately half as dark as dark smoke\u003c\/li\u003e\n\u003cli\u003eBuilt-in air egress channels — prevents air bubble trapping during install\u003c\/li\u003e\n\u003cli\u003eEvery material allows ample light to pass through — not a blackout\u003c\/li\u003e\n\u003cli\u003eMade and cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSmoke or Tint Your Supra F1 Lamps — Standard Finishes\u003c\/h2\u003e\n\u003cp\u003eIf you have the \u003cstrong\u003eOLM aftermarket F1-style rear lamps\u003c\/strong\u003e on your \u003cstrong\u003e2020+ Toyota GR Supra A90\u003c\/strong\u003e and want to darken or tint the lens, these are the straightforward options. Dark Smoke for a blacked-out look, Light Smoke (approximately half as dark) for a subtle tint, or Red to change the lens color entirely. These also fit any other aftermarket brake lamp with a flat lens — not just OLM. Every option allows full light transmission — these are tint overlays, not blackouts.\u003c\/p\u003e\n\u003cp\u003eFor more premium specialty textures (Carbon Fiber, Honeycomb, Stealth), see the \u003ca href=\"\/products\/special-edition-aftermarket-f1-overlay-2020-supra\"\u003eSpecial Edition version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eOverlay Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Smoke\u003c\/strong\u003e — deep dark tint, clean and stealthy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Smoke\u003c\/strong\u003e — approximately half as dark as dark smoke; subtle tint with minimal visual change\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed\u003c\/strong\u003e — changes the lens to a red tint; striking color shift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the lens surface thoroughly — remove all dirt, debris, and wax residue\u003c\/li\u003e\n\u003cli\u003eMix one drop of dish soap with a cup of water\u003c\/li\u003e\n\u003cli\u003eMist the adhesive side of the vinyl and the lens surface with the soapy water mixture\u003c\/li\u003e\n\u003cli\u003eCenter the overlay and slowly press from the center while keeping the ends lifted\u003c\/li\u003e\n\u003cli\u003eOnce you are confident in the alignment, push air and water out from center to edges\u003c\/li\u003e\n\u003cli\u003eUse a hair dryer to dry the soapy water — this dramatically increases adhesion once dry\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDesigned for the \u003cstrong\u003eOLM aftermarket F1-style rear lamps\u003c\/strong\u003e for the 2020+ Toyota GR Supra A90. Also fits any aftermarket brake lamp with a \u003cstrong\u003eflat lens\u003c\/strong\u003e. Not designed for factory Supra tail lights.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow dark is Light Smoke compared to Dark Smoke?\u003c\/strong\u003e\u003cbr\u003eLight smoke is approximately half as dark. If you want a subtle tint that's barely noticeable in daylight but visible at night, Light Smoke is the one. Dark Smoke is a significant tint that noticeably darkens the lens appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these work on my non-OLM aftermarket lamps?\u003c\/strong\u003e\u003cbr\u003eYes — these fit any aftermarket brake lamp with a flat lens, not just OLM. If your aftermarket lamp has a curved or compound-curve lens surface, check the fit before committing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these block light output?\u003c\/strong\u003e\u003cbr\u003eNo — all three options allow ample light to pass through. They tint or color the lens without blocking brake light or turn signal function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these work on factory Supra lights?\u003c\/strong\u003e\u003cbr\u003eNo — these are cut for aftermarket lamp dimensions. The factory tail light lens shape is different and these will not fit correctly.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53986917941548,"sku":"A90F1DS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53986917974316,"sku":"A90F1LS","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53986918007084,"sku":"A90F1RD","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/smoked-or-red-aftermarket-f1-overlay-2020-supra-stickerfab-1-34437271748927.jpg?v=1787933310"},{"product_id":"rear-supra-emblem-overlay-various-colors-2020-supra","title":"Rear Supra Emblem Overlay (Various Colors) - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eVinyl overlay for the factory rear \u003cstrong\u003eSUPRA emblem\u003c\/strong\u003e on the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdds color or texture to the factory black emblem — 11 options including 3D Carbon Fiber\u003c\/li\u003e\n\u003cli\u003eComes with 2 stickers — backup included\u003c\/li\u003e\n\u003cli\u003eWet install — easy alignment with the \"U\" in SUPRA as your guide\u003c\/li\u003e\n\u003cli\u003eMade in the USA by StickerFab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eAdd Color to the Rear SUPRA Emblem\u003c\/h2\u003e\n\u003cp\u003eThe factory rear SUPRA badge on the \u003cstrong\u003e2020+ Toyota GR Supra A90\u003c\/strong\u003e is black — which blends into the bodywork and disappears. This vinyl overlay drops right on top of it to add color or texture without removing or replacing anything. Choose from solid colors, or go with the \u003cstrong\u003e3D Carbon Fiber\u003c\/strong\u003e option for a textured look that adds depth to the emblem. Ships with two stickers — one to install, one backup in case of a stretch or misalignment. Made in the USA by StickerFab.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eWet install recommended for easy alignment and clean results.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean the emblem thoroughly — remove all dirt, debris, and wax residue\u003c\/li\u003e\n\u003cli\u003ePeel the vinyl and immediately mist the adhesive side with slightly soapy water (1 drop dish soap per cup of water) — this lets you reposition if you're off\u003c\/li\u003e\n\u003cli\u003eUse the \u003cstrong\u003e\"U\" in SUPRA\u003c\/strong\u003e as your alignment guide — center on that letter first, then lay the rest down\u003c\/li\u003e\n\u003cli\u003eMake small adjustments as needed while the adhesive is wet. If you're significantly off, peel up and start again\u003c\/li\u003e\n\u003cli\u003eOnce aligned, push water out from the center to the edges using firm finger pressure\u003c\/li\u003e\n\u003cli\u003eApply light heat with a hair dryer or heat gun to increase adhesion and dry the water\u003c\/li\u003e\n\u003cli\u003eLet the car sit in the sun or give it time to dry fully — the edges may lift slightly until completely dry. Come back with the heat gun for a final pass once dry\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHeat note:\u003c\/strong\u003e If the heat is uncomfortable on your skin, it's borderline too much for the vinyl in this application. Low heat, multiple passes.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits: 2020+ Toyota GR Supra A90 (all trims). Designed for the factory rear SUPRA badge.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this replace the factory emblem or go on top?\u003c\/strong\u003e\u003cbr\u003eIt goes on top of the factory emblem — no removal required. The vinyl overlays the existing badge surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it come with two stickers?\u003c\/strong\u003e\u003cbr\u003eThe backup piece covers the most common install issue: stretching or misaligning the first piece. The vinyl can stretch slightly when peeling, so having a second one means you're covered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 3D Carbon Fiber look like?\u003c\/strong\u003e\u003cbr\u003eIt has a woven carbon fiber texture that reflects light differently at different angles, giving the emblem a layered, textured depth. It's a dark material — not bright — but adds a premium look that plain black doesn't have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does the adhesive take to fully cure?\u003c\/strong\u003e\u003cbr\u003eThe edges may lift slightly until the adhesive is completely dry. Keep the car in the sun or use a hair dryer to fully cure. Come back for a final heat pass once dry and press the edges down firmly.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Red","offer_id":53986918105388,"sku":"A90REMB-RD","price":14.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":53986918138156,"sku":"A90REMB-WH","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":53986918170924,"sku":"A90REMB-BL","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Hyperblue","offer_id":53986918203692,"sku":"A90REMB-HB","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Mint","offer_id":53986918236460,"sku":"A90REMB-MN","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Highlighter Yellow","offer_id":53986918269228,"sku":"A90REMB-HY","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Gold","offer_id":53986918301996,"sku":"sku-40815288025199","price":14.99,"currency_code":"USD","in_stock":true},{"title":"3D Carbon (Black)","offer_id":53986918334764,"sku":"A90REMB-3DCF","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":53986918367532,"sku":"A90REMB-OR","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":53986918400300,"sku":"A90REMB-OR","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":53986918433068,"sku":"A90REMB-SI","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/rear-supra-emblem-overlay-various-colors-2020-supra-stickerfab-1.jpg?v=1787933310"},{"product_id":"supra-steering-wheel-trim-overlays-full-set-2020-supra","title":"\"Supra\" Steering Wheel Trim Overlays (Full Set) - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 align=\"center\"\u003eFull Steering Wheel Overlays with Logo\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eOne criticism of the GR Supra is the steering wheel. There are a few things about it that people don't like about it, but there is definitely room for improvement here and there. A large, plain spot was left on the bottom of the spokes which can be filled with textured vinyl with a \"SUPRA\" logo. This kit also has pieces that cover the top, bottom, and sides of the steering wheel trim. It is made by Sticker Fab who is a US based company that has been creating designs for late model vehicles.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eMATERIAL DETAILS\u003c\/h4\u003e\n\u003cp\u003eDragon Wrap™ Carbon Fiber Film is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.\u003c\/p\u003e\n\u003cp\u003eLasts up to 5 years outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Details:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConcept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.\u003c\/p\u003e\n\u003chr data-mce-selected=\"1\"\u003e\n\u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eClean the application area and make sure it is clear of any dirt, debris, and ideally wax. You will want to have a heat gun or hair dryer handy. Start with the lower spoke piece that has the logo. Apply evenly without heat. Use your fingers to press down on the vinyl. Apply the button overlays without heat initially. Once they are placed down evenly, apply small amounts of heat and stretch the portions that did not lay flat with your fingers (outer edges). Stretch the material by pressing down softly. As needed, apply more pressure to make sure areas do not crinkle. Once these are done, apply the top piece as far forward of the steering wheel as possible. You may need to use small amounts of heat on the ends. The lower spoke surround requires the most attention. Apply evenly with enough material forward of the sides to wrap around the top, but not so that it will touch the painted portion of the trim. Apply light amounts of heat evenly on the vinyl. Press it down so it covers all of the plain trim.\u003c\/span\u003e\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986980102444,"sku":"A90STR3DBK","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/supra-steering-wheel-trim-overlays-full-set-2020-supra-stickerfab-1.jpg?v=1787933488"},{"product_id":"3d-carbon-defroster-trim-overlays-2020-supra","title":"3D Carbon Defroster Trim Overlays - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Defroster Trim Overlays - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-defroster-trim-overlays-2020-supra-stickerfab-1.jpg?v=1758050528\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Defroster Trim Overlays - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-defroster-trim-overlays-2020-supra-stickerfab-2.jpg?v=1758050530\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986980757804,"sku":"A90DEFTRIM3DCF","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-defroster-trim-overlays-2020-supra-stickerfab-1.jpg?v=1787933489"},{"product_id":"3d-carbon-seatbelt-buckle-panel-scuff-guard-2020-supra","title":"3D Carbon Seatbelt Buckle Panel Scuff Guard - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Seatbelt Buckle Panel Scuff Guard - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-seatbelt-buckle-panel-scuff-guard-2020-supra-stickerfab-1.jpg?v=1758050523\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Seatbelt Buckle Panel Scuff Guard - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-seatbelt-buckle-panel-scuff-guard-2020-supra-stickerfab-2.jpg?v=1758050524\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986981085484,"sku":"A90SBBP3DBK","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-seatbelt-buckle-panel-scuff-guard-2020-supra-stickerfab-1.jpg?v=1787933491"},{"product_id":"supra-steering-wheel-trim-overlay-lower-2020-supra","title":"\"Supra\" Steering Wheel Trim Overlay (Lower) - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003ch2 align=\"center\"\u003e\"Supra\" Steering Wheel Trim Overlay (Lower)\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eOne criticism of the GR Supra is the steering wheel. There are a few things about it that people don't like about it, but there is definitely room for improvement here and there. A large, plain spot was left on the bottom of the spokes which can be filled with textured vinyl with a \"SUPRA\" logo. \u003c\/p\u003e\n\u003ch4\u003eINSTALLATION NOTES\u003c\/h4\u003e\n\u003cp\u003eClean the application area and make sure it is clear of any dirt, debris, and ideally wax. Remove from the backing paper. Align with the bottom of the open area and apply gently. Do not put heavy pressure down on the overlay until you are satisfied with the alignment.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986981282092,"sku":"A90STR3DBKLW-S","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/supra-steering-wheel-trim-overlay-lower-2020-supra-stickerfab-1.jpg?v=1787933491"},{"product_id":"3d-carbon-shifter-trim-panel-overlay-2020-supra","title":"3D Carbon Shifter Trim Panel Overlay - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Shifter Trim Panel Overlay - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-shifter-trim-panel-overlay-2020-supra-stickerfab-1.jpg?v=1758050547\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Shifter Trim Panel Overlay - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-shifter-trim-panel-overlay-2020-supra-stickerfab-2.jpg?v=1758050548\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986981347628,"sku":"A90SHIFTER3DCF","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-shifter-trim-panel-overlay-2020-supra-stickerfab-1.jpg?v=1787933492"},{"product_id":"3d-carbon-inner-door-window-triangle-trim-overlays-2020-supra","title":"3D Carbon Inner Door Window Triangle Trim Overlays - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Inner Door Window Triangle Trim Overlays - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-inner-door-window-triangle-trim-overlays-2020-supra-stickerfab-1-34437517738303.jpg?v=1758050513\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Inner Door Window Triangle Trim Overlays - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-inner-door-window-triangle-trim-overlays-2020-supra-stickerfab-2.jpg?v=1758050516\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986981413164,"sku":"A90INQTRDR3DCF","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-inner-door-window-triangle-trim-overlays-2020-supra-stickerfab-1-34437517738303.jpg?v=1787933493"},{"product_id":"3d-carbon-phone-charger-usb-cigarette-lighter-tray-overlay-2020-supra","title":"3D Carbon Phone Charger \/ USB \/ Cigarette Lighter Tray Overlay - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Phone Charger \/ USB \/ Cigarette Lighter Tray Overlay - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-phone-charger-usb-cigarette-lighter-tray-overlay-2020-supra-stickerfab-1-34437520818495.jpg?v=1758050534\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Phone Charger \/ USB \/ Cigarette Lighter Tray Overlay - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-phone-charger-usb-cigarette-lighter-tray-overlay-2020-supra-stickerfab-2.jpg?v=1758050535\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986981445932,"sku":"A90INTTRAY3DCF","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-phone-charger-usb-cigarette-lighter-tray-overlay-2020-supra-stickerfab-1-34437520818495.jpg?v=1787933493"},{"product_id":"3d-carbon-trunk-hatch-strut-overlays-2020-supra","title":"3D Carbon Trunk Hatch Strut Overlays - 2020+ Supra","description":"\u003cstyle\u003e\n@media (max-width:680px){\n  .sf-row { display:block !important; }\n  .sf-row td { display:block !important; width:100% !important; padding:0 0 24px 0 !important; box-sizing:border-box; }\n}\n\u003c\/style\u003e\n\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium 3D carbon fiber VINYL overlay\u003c\/strong\u003e — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects a damage-prone panel\u003c\/strong\u003e — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-cut to fit\u003c\/strong\u003e — made to match the factory contour for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForgiving install\u003c\/strong\u003e — heat- and pressure-activated adhesive for a clean, low-stress application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e — cut to order by StickerFab in Fort Myers, FL from premium US\/Euro-sourced vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2020+ Supra\u003c\/strong\u003e — precision-cut for a clean, factory-look fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003e3D Carbon Trunk Hatch Strut Overlays - 2020+ Supra\u003c\/h2\u003e\n\u003cp style=\"text-align: center; color: #555; margin-bottom: 32px;\"\u003eProtect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium \u003cstrong\u003e3D carbon fiber vinyl overlay\u003c\/strong\u003e, precision-cut to order by StickerFab in \u003cstrong\u003eFort Myers, FL\u003c\/strong\u003e for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-trunk-hatch-strut-overlays-2020-supra-stickerfab-1.jpg?v=1758050556\" alt=\"3D carbon fiber vinyl overlay — 3D Carbon Trunk Hatch Strut Overlays - 2020+ Supra\" style=\"max-width: 70%; width: 100%; border-radius: 6px; display: inline-block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #fff8e1; border-radius: 8px; padding: 18px 24px; margin-bottom: 40px; border: 1px solid #ffe082;\"\u003e\n\u003cp style=\"margin: 0; color: #5d4d00; line-height: 1.6;\"\u003e\u003cstrong\u003eJust so it's clear:\u003c\/strong\u003e \"3D Carbon Fiber\" is our name for a premium \u003cstrong\u003etextured vinyl film\u003c\/strong\u003e — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eProtects a Piece That Takes a Beating\u003c\/h3\u003e\n\u003cp\u003eFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel \u003cem\u003eand\u003c\/em\u003e upgrade the look in one step.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePremium Vinyl, Made in the USA\u003c\/h3\u003e\n\u003cp\u003eEach piece is cut to order from \u003cstrong\u003epremium 3D carbon fiber vinyl\u003c\/strong\u003e — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.\u003c\/p\u003e\n\u003cp\u003eCut and shipped from our shop in \u003cstrong\u003eFort Myers, Florida\u003c\/strong\u003e — a real product made by real people, made to order.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"sf-row\" style=\"width: 100%; border-collapse: collapse; margin-bottom: 40px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 45%; vertical-align: top; padding: 0 24px 0 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/3d-carbon-trunk-hatch-strut-overlays-2020-supra-stickerfab-2.jpg?v=1758050558\" alt=\"3D carbon fiber vinyl texture close-up — 2020+ Supra\" style=\"width: 100%; border-radius: 6px; display: block;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55%; vertical-align: top; padding: 0 0 0 8px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003eNot All Materials Are Created Equal\u003c\/h3\u003e\n\u003cp\u003eWe use premium vinyl with a repositionable permanent adhesive on an air-egress liner — forgiving to apply, dimensionally stable, and built to hold up over the long haul.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"background: #f7f7f7; border-radius: 8px; padding: 24px 28px; margin-bottom: 48px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003e🔧 Installation\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eInstall in mild, 75–85°F weather. We recommend a \u003cstrong\u003edry install\u003c\/strong\u003e: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px; color: #444; line-height: 1.6;\"\u003eFor the 3D Carbon material, do not wax it. Clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin: 40px 0; border: none; border-top: 1px solid #e0e0e0;\"\u003e\n\u003ch2 style=\"text-align: center; margin-bottom: 24px;\"\u003eFAQ\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eNo — \"3D Carbon Fiber\" is our premium textured \u003cstrong\u003evinyl\u003c\/strong\u003e overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my car?\u003c\/strong\u003e\u003cbr\u003eIt's precision-cut for the \u003cstrong\u003e2020+ Supra\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hard to install?\u003c\/strong\u003e\u003cbr\u003eNo — it's a forgiving install. Clean the surface, apply the piece, and press it down. The adhesive activates with heat and pressure.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I care for it?\u003c\/strong\u003e\u003cbr\u003eDo not wax it. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 24px 20px 0;\"\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — cut to order by StickerFab in Fort Myers, Florida from premium US\/Euro-sourced vinyl.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; vertical-align: top; padding: 0 0 20px 8px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53986982428972,"sku":"A90TS3D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/3d-carbon-trunk-hatch-strut-overlays-2020-supra-stickerfab-1.jpg?v=1787933494"},{"product_id":"emblem-overlays-tint-2020-supra","title":"Emblem Overlays (Tint) - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n    \u003cli\u003eCost effective way to change up the look\u003c\/li\u003e\n    \u003cli\u003eEasy to install over OEM emblems\u003c\/li\u003e\n    \u003cli\u003eTwo sets provided. (2x front, 2x rear)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\" class=\"product-single__title\" itemprop=\"name\"\u003eEmblem Overlays (Tint) \u003c\/h2\u003e\n\u003cp\u003eWe set off to knock out some of the chrome in the Toyota logo, and that's exactly what these emblems do.\u003c\/p\u003e\n\u003cp\u003eTwo sets provided. (2x front, 2x rear). 1 set is extra.  These install OVER your factory emblems.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAVAILABLE MATERIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n    \u003cli\u003eDark Smoke -  Standard dark smoke material.  Made in Germany.\u003c\/li\u003e\n    \u003cli\u003eDark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/li\u003e\n    \u003cli\u003eLight Smoke - \u003cspan data-mce-fragment=\"1\"\u003eStandard light \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003esmoke material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eLight Smoke LX - \u003cspan data-mce-fragment=\"1\"\u003ePremium light smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Stealth - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Honeycomb - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eDark Smoke Carbon Fiber - \u003cspan data-mce-fragment=\"1\"\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDark Smoke Galaxy -\u003cspan\u003e\u003c\/span\u003ePremium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). \u003cspan\u003e\u003c\/span\u003eA galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003eRed - \u003cspan data-mce-fragment=\"1\"\u003eStandard red\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e material.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003eYellow - \u003cspan data-mce-fragment=\"1\"\u003eStandard yellow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ematerial.  Made in Germany.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"container\"\u003e\n    \u003cdiv class=\"leftColumn\"\u003e\n        \u003ch4\u003eINSTRUCTIONS\u003c\/h4\u003e\n        \u003cp\u003eClean the application and surrounding areas prior to applying.  We recommend the following items for installation:\u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003eMicrofiber\u003c\/li\u003e\n            \u003cli\u003eDetailing Spray or glass cleaner\u003c\/li\u003e\n            \u003cli\u003eSoapy Water (\u003ca href=\"https:\/\/www.stickerfab.com\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application Fluid recommended\u003c\/a\u003e)\u003c\/li\u003e\n            \u003cli\u003eHeat Gun or Hair Dryer (optional)\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eMake sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.\u003cbr\u003e\u003cbr\u003eThis video shows you how to work with vinyl.\u003cbr\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"rightColumn\"\u003e\n        \u003cdiv class=\"video-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Kr8x1TNVycU?start=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e","brand":"StickerFab","offers":[{"title":"Dark Smoke","offer_id":53987019751724,"sku":"20SUPRAEM-DS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke","offer_id":53987019784492,"sku":"20SUPRAEM-LS","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Stealth","offer_id":53987019817260,"sku":"20SUPRAEM-ST","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Galaxy","offer_id":53987019850028,"sku":"20SUPRAEM-GY","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Honeycomb","offer_id":53987019882796,"sku":"20SUPRAEM-HC","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke Carbon Fiber","offer_id":53987019915564,"sku":"20SUPRAEM-CF","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Dark Smoke LX+","offer_id":53987019948332,"sku":"20SUPRAEM-LX","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Light Smoke LX+","offer_id":53987019981100,"sku":"20SUPRAEM-LLX","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53987020013868,"sku":"20SUPRAEM-RD","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":53987020046636,"sku":"20SUPRAEM-AM","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":53987020079404,"sku":"20SUPRAEM-YL","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/emblem-overlays-tint-2020-supra-stickerfab-1-35683412476223.jpg?v=1787933676"},{"product_id":"a91-retro-heritage-trd-style-decklid-stripes-2020-supra","title":"A91 Retro Heritage TRD Style Decklid Stripes - 2020+ Supra","description":"\u003c!-- splitnew --\u003e\u003cp\u003eSticker Fab has distributed over 20,000 vinyl products in the last few years! This new platform will be a great canvas for their accents and protection items.\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eYou'll have your vehicle looking closer to a special edition A91 Supra in no time.  These are ultra easy to install and will last for a long time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eA customer asked us for this specific design so we created them!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e Sold as a set.  4 total stripes.  2 for driver's side and 2 for passenger side.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eMATERIAL DETAILS\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWe print on Orajet material and then laminate the vinyl to protect it against abrasions and harmful UV rays.\u003c\/p\u003e\n\u003ch3\u003eINSTALLATION NOTES\u003c\/h3\u003e\n\u003cp\u003eRecommended tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/felt-lined-squeegee-for-vinyl-application\" data-mce-href=\"\/products\/felt-lined-squeegee-for-vinyl-application\"\u003eFelt tip squeegee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/stickerfab-515.myshopify.com\/products\/stickerfab-installation-fluid-bottle-50ml\" data-mce-href=\"https:\/\/stickerfab-515.myshopify.com\/products\/stickerfab-installation-fluid-bottle-50ml\" target=\"_blank\"\u003eStickerFab Application fluid\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the application area and have soapy water available.  Use a drop of dish soap mixed with a full cup of water.\u003c\/p\u003e\n\u003cp\u003eApply some of the soapy water to the bottom of the vinyl.  It will allow you to slide the vinyl around until you find the proper placement.  It will also aide in removing air bubbles.  \u003cbr\u003e\u003cspan\u003e\u003cbr\u003eYou want to get the alignment of the piece so that it contours the fenders.  Start with the larger piece and use the defroster lines on the rear window as a point of reference.  You will want to align the front edge of the larger piece at approximately the fourth defroster lines.  Please see the photos.\u003cbr\u003e\u003cbr\u003eOnce you have to aligned, use your fingers (or a squeegee \/ credit card wrapped in microfiber) to push out the air and water.  To speed up the process of drying you can use light heat from a heat gun or hair dryer.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the first piece is aligned, begin to apply the smaller piece.  It will sit behind the larger stripe by approximately 1.5\".\u003cbr\u003e\u003cbr\u003eRepeat for the other side.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"TRD Style","offer_id":53987025944876,"sku":"A91DECKSTP-TRD","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/a91-retro-heritage-trd-style-decklid-stripes-2020-supra-stickerfab-1.jpg?v=1787933726"},{"product_id":"carbon-fiber-reverse-lamp-overlay-2020-supra","title":"Carbon Fiber Reverse Lamp Overlay - 2020+ Supra","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003e3D Carbon Fiber overlay for the \u003cstrong\u003efactory reverse lamp\u003c\/strong\u003e on the \u003cstrong\u003e2020+ Toyota GR Supra (A90)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for the stock reverse lamp housing — the rectangular lamp that OLM converts to a brake light\u003c\/li\u003e\n\u003cli\u003eCan technically fit other aftermarket lamps with a flat surface, but will reduce light output slightly on those\u003c\/li\u003e\n\u003cli\u003e2-piece set — both pieces shown in photos\u003c\/li\u003e\n\u003cli\u003eBuilt-in air egress channels for bubble-free installation\u003c\/li\u003e\n\u003cli\u003eMade and cut in the USA by StickerFab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eCarbon Fiber the Factory Reverse Lamp on Your Supra\u003c\/h2\u003e\n\u003cp\u003eThe factory reverse lamp on the \u003cstrong\u003e2020+ Toyota GR Supra\u003c\/strong\u003e is a rectangular-ish housing that sits in the lower bumper,  This \u003cstrong\u003e3D Carbon Fiber overlay\u003c\/strong\u003e gives it a premium carbon look that ties into the rest of the car without any modification. The cutout pattern preserves the visibility of the LED array through the overlay while adding carbon texture around it.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the stock reverse lamp. On the stock setup (reverse function only) light transmission is good — the carbon material allows the white reverse light to show clearly.  Ships as a 2-piece set with air egress channels built into the adhesive for a clean, bubble-free install. Made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3D Carbon Fiber texture.\u003c\/li\u003e\n\u003cli\u003eBuilt-in air egress channels — prevents bubble trapping\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003cli\u003eMade and cut in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the lamp lens surface thoroughly — remove all dirt, wax, and debris\u003c\/li\u003e\n\u003cli\u003eMix one drop of dish soap with a cup of water and mist the adhesive and lens surface\u003c\/li\u003e\n\u003cli\u003eCenter the overlay and press from the middle while keeping the edges lifted\u003c\/li\u003e\n\u003cli\u003eOnce aligned, push water and air out from center to edges\u003c\/li\u003e\n\u003cli\u003eUse a hair dryer on low to dry and increase adhesion — once dry, the adhesive becomes very sticky\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits: 2020+ Toyota GR Supra A90 — designed for the \u003cstrong\u003efactory reverse lamp housing\u003c\/strong\u003e. Can technically fit other aftermarket lamps with a flat surface, but will reduce light output slightly on those applications. Not designed for factory tail lights.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill this block the reverse light output?\u003c\/strong\u003e\u003cbr\u003eOn the stock reverse lamp (white reverse function), the carbon material with cut outs allows clear light transmission — the white light shows through well. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same overlay as the F1 lamp versions?\u003c\/strong\u003e\u003cbr\u003eNo — this is cut for the factory reverse lamp housing, which has different dimensions than the OLM F1 lamp. The F1 overlays are separate listings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pieces are included?\u003c\/strong\u003e\u003cbr\u003e2 pieces — both pieces shown in the product photos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these have air channels like the other overlays?\u003c\/strong\u003e\u003cbr\u003eYes — built-in air egress channels prevent bubbles from trapping. The wet install method combined with the channels makes alignment and installation forgiving.\u003c\/p\u003e","brand":"StickerFab","offers":[{"title":"Default Title","offer_id":53987193127212,"sku":"A90REVLAMP3DCB","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/supra-reverse-lamp-carbon-overlay.jpg?v=1787934227"},{"product_id":"bbs-lm-19x9-5-23-19x11-35-5x112-diamond-silver-a90-a91-supra-set-of-4","title":"BBS LM 19x9.5 +23 \/ 19x11 +35 5x112 Diamond Silver (A90\/A91 Supra, Set of 4)","description":"\u003cp\u003e\u003cbr\u003eThe BBS LM is the wheel that defined the two-piece forged mesh look. In production since 1994 and born from the BBS racing program at Le Mans, the LM pairs a forged center with a forged outer lip joined by exposed hardware, the construction that made it a benchmark for both motorsport and street builds for three decades.\u003cbr\u003e\u003cbr\u003eThis set is built specifically for the A90\/A91 MKV Supra, with a forged 2-piece structure that keeps weight low while handling the loads of a high-power chassis. The staggered fitment (19x9.5 front, 19x11 rear) fills the Supra's arches with the wide, deep-lip stance the car was made for.\u003cbr\u003e\u003cbr\u003eThe finish is Diamond Silver center with a diamond-cut polished lip, the classic LM look. The machined lip catches light against the silver mesh face, giving the wheel the depth and presence that has kept the LM in demand since its introduction.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: BBS LM (Forged 2-Piece)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront: 19x9.5, +23 offset (LM463), 57mm rim depth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear: 19x11, +35 offset (LM294), 70mm rim depth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 5x112\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHub Bore: 66.6mm (PFS hubcentric rings required, included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged 2-Piece\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish: Diamond Silver Center \/ Diamond Cut Lip\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturer: BBS, Made in Japan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTPMS Compatible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSold as: Staggered Set of 4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes: PFS hubcentric rings, center caps, valve stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for the Toyota MKV Supra (A90 \/ A91). The staggered 19x9.5 +23 front \/ 19x11 +35 rear setup is a direct fitment for the chassis. Also fits BMW G29 Z4 and other 5x112 applications with correct hubring and clearance verification.\u003cbr\u003eProvide your year, make, and model when ordering so the correct BBS PFS hubcentric rings are matched to your chassis.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment Disclaimer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitment listings are a general guide. Wheel fitment depends on your vehicle's year, trim, suspension, brake setup, and tire choice. It is the buyer's responsibility to confirm correct fitment before purchase. AutoTecknic is not responsible for incorrectly ordered specifications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReturns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMounted wheels cannot be returned. Wheels that have had tires mounted, been installed, or show any signs of use are non-returnable. Inspect your wheels thoroughly before mounting.\u003cbr\u003e\u003c\/p\u003e","brand":"AutoTecknic USA","offers":[{"title":"Default Title","offer_id":53988300685612,"sku":"BBS-LM-19-95F11R-23F35R-5112-DSIL-A9X","price":7100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/IMG_6209_ccb4f15c-2432-45c4-a50d-01d8ead4d85d.jpg?v=1787952972"},{"product_id":"volk-racing-te37sl-19x9-5-22-19x10-5-35-5x112-pressed-graphite-a90-supra-bmw-g2x-set-of-4","title":"Volk Racing TE37SL 19x9.5 +22 \/ 19x10.5 +35 5x112 Pressed Graphite - A90 Supra \/ BMW G2x (Set of 4)","description":"\u003cp\u003e\u003cbr\u003eThe TE37SL is the Super Lap evolution of the legendary TE37, a forged one-piece wheel built slightly lighter than the standard TE37 while keeping the strength and rigidity the line is known for. The SL is distinguished by its deep-rim concave face and machined detailing, and to chase maximum weight savings RAYS removed mass from around the center hub area.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eThis is a staggered set built for the A9x-generation Toyota GR Supra and BMW G2x chassis: 19x9.5 +22 up front and 19x10.5 +35 in the rear, on a 5x112 bolt pattern with a 73.1mm hub bore. The finish is Pressed Graphite (PG), a deep gunmetal-charcoal with a warm metallic tone, paired here with a machined outer lip and the signature red TE37SL spoke decal. Each wheel is forged in Japan, TPMS compatible, and ships with valve stems and spoke decals.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eNote on center caps: because the SL removes material around the hub for weight savings, standard optional center caps cannot be fitted without center cap adapters.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBrand: Volk Racing (RAYS Engineering)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eModel: TE37SL (Super Lap)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFront Size: 19x9.5J +22\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRear Size: 19x10.5J +35\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBolt Pattern: 5x112\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCenter Bore: 73.1mm\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFinish: Pressed Graphite (PG)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eConstruction: Forged 1-Piece (Deep Rim)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTPMS: Compatible (valve stems + decals included)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCenter Caps: Standard caps require adapters (cannot fit directly)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in: Japan\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eSold as: Staggered Set of 4 (2 front, 2 rear)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eConfirmed Fitment\u003c\/strong\u003e\u003cbr\u003eThe staggered 19x9.5 +22 \/ 19x10.5 +35 5x112 spec is confirmed for:\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eToyota GR Supra (A90 \/ A91)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBMW G2x platform (e.g. Z4 G29 and related 5x112 G-series)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eNotes:\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eConfirm your exact model, brake setup, and tire size before ordering.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStandard center caps require adapters on the SL.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eFitment Disclaimer\u003cbr\u003e\u003c\/strong\u003eFitment listings are a general guide. Wheel fitment depends on your vehicle's year, trim, suspension, brake setup, and tire choice. It is the buyer's responsibility to confirm correct fitment before purchase. AutoTecknic is not responsible for incorrectly ordered specifications.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eReturns\u003c\/strong\u003e\u003cbr\u003eMounted wheels cannot be returned. Wheels that have had tires mounted, been installed, or show any signs of use are non-returnable. Inspect your wheels thoroughly before mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AutoTecknic USA","offers":[{"title":"Default Title","offer_id":53988301013292,"sku":"VOLK-TE37SL-1995P22-19105P35-PG-5112","price":5021.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/unnamed-_20.jpg?v=1787952980"}],"url":"https:\/\/lee-mods.com\/collections\/toyota-supra.oembed","provider":"Lee Mods inc.","version":"1.0","type":"link"}