{"product_id":"pdm-bkbn-k1210dl-1175dc","title":"Fabtech K1210DL 3-Inch Ball Joint UCA Lift Kit with Reservoir Coilovers — 2025 Silverado\/Sierra 1500 V8 Gas","description":"\u003cp\u003eFabtech K1210DL combines replacement upper control arms, two front Dirt Logic 2.5 reservoir coilovers, rear blocks and two rear Dirt Logic 2.25 non-reservoir shocks.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2025 Chevrolet Silverado 1500 Custom, LT, WT, LTZ, High Country or RST, and GMC Sierra 1500 SLE, SLT or Elevation; V8 gasoline, automatic transmission, 2WD or 4WD, with stock suspension. Verify the exact vehicle and installed equipment before ordering.\u003c\/li\u003e\n\u003cli\u003eDoes not fit standard cab, Adaptive Ride Control, Super Cruise, GMC AT4, Chevrolet Trail Boss, four-cylinder or diesel models. This listing excludes Denali and 2026 models.\u003c\/li\u003e\n\u003cli\u003eNominal 3-inch system with 1.5-inch rear blocks. The supplied round U-bolts must match the actual vehicle application; verify the rear axle, U-bolt and leaf-spring configuration before ordering. Factory wheels and tires cannot be used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS21309 box: one FT20833 driver and one FT20834 passenger upper control arm, two FT20619 ball joints, two FTBK15 1.5-inch rear blocks, four FT768U U-bolts and the specified FT20887 hardware subassembly. No front strut spacers.\u003c\/li\u003e\n\u003cli\u003eOne FTS21257 gasoline front reservoir-coilover pair: one FT820632D driver and one FT820632P passenger assembly, two FT30794 reservoir mounts and FT86054 hardware.\u003c\/li\u003e\n\u003cli\u003eTwo FTS811452 rear Dirt Logic 2.25 non-reservoir shocks. Four new dampers total: two front coilovers and two rear shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required. Read current FT21268i and the exact FTS21257\/FT820632 coilover instructions, check all parts and record factory alignment before work.\u003c\/li\u003e\n\u003cli\u003eThe front coilover upper mounting hole requires sanding approximately 1\/2 inch away from the CV axle as shown in FT820632; mount the coilover offset away from the axle. Reservoir mounts require two 1\/4-inch drilled holes per side and supplied self-tapping bolts and clamps. Do not remove the pressurized coilover springs or loosen reservoir hoses.\u003c\/li\u003e\n\u003cli\u003eRemove the factory frame bumpstop tabs and sand smooth. Assemble the upper arms with the specified greased bushings, sleeves and control-arm spacers; relocate the brake\/ABS brackets as directed.\u003c\/li\u003e\n\u003cli\u003eInstall the selected rear block\/U-bolt hardware and FTS811452 Dirt Logic rear shocks using their supplied instructions. Use the selected Dirt Logic shock hardware and specifications.\u003c\/li\u003e\n\u003cli\u003eCheck wheel, tire, brake-hose and ABS-wire clearances through full steering travel. Align to factory specifications, adjust headlights and recheck all fasteners and wheel hardware after 50 miles and periodically.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eManufacturer guidance, all with minor trimming and 5-inch wheel backspacing: 33\/12.50R18 or 295\/65R18 on 18×9 wheels; 295\/55R20 or 33\/12.50R20 on 20×9 wheels; 285\/55R22 on 22×9 wheels. Verify clearance on the actual vehicle. Wheels and tires are sold separately.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K1210DL. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/3-ball-joint-uca-lift-kit-w-front-dirt-logic-2-5-resi-coilovers-rear-dirt-logic-2-25-shocks-k1210dl\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084085350700,"sku":"K1210DL","price":3299.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/K1210DLDirt-Logic-RESI-Front.jpg?v=1793867234","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k1210dl-1175dc","provider":"Lee Mods inc.","version":"1.0","type":"link"}