{"product_id":"pdm-bkbn-k2434dl-481923","title":"Fabtech K2434DL 6-Inch FTS-X Radius Arm Lift Kit with Dirt Logic Shocks — 2023–2025 F-250\/F-350 4WD Diesel","description":"\u003cp\u003eFabtech K2434DL combines separate front lift coils and adjustable FTS-X radius arms with front Dirt Logic 2.25 reservoir shocks, rear block hardware and rear Dirt Logic 2.25 non-reservoir shocks.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2023–2025 Ford F-250 or F-350 Super Duty XL, XLT, Lariat, King Ranch or Platinum; diesel, 4WD and single rear wheel. Complete system installation starts with a stock vehicle; verify exact vehicle equipment before ordering.\u003c\/li\u003e\n\u003cli\u003eDoes not fit gas engines, dually trucks or Ford onboard scale systems. 2026 applications are outside this listing.\u003c\/li\u003e\n\u003cli\u003eVehicles with a two-piece rear driveshaft require the separately sold FTS419 carrier-bearing shim kit. Vehicles with a factory rear sway bar require the separately sold FTS22276 extended rear sway-bar links. Check these requirements before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS22024BK front coil box containing TWO front lift coil springs. These are separate springs, not coilover shocks.\u003c\/li\u003e\n\u003cli\u003eOne FTS22219 rear box: driver and passenger FTBK64 lift blocks, FOUR FT742U round 5\/8-18 × 18 × 3.50-inch U-bolts and specified U-bolt hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS22389 front component box with the specified steering, track-bar, sway-bar and bumpstop relocation components and installation hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS22390 adjustable radius-arm box forming a driver and passenger pair, with rod ends, misalignments and hardware.\u003c\/li\u003e\n\u003cli\u003eTWO FTS800382 FRONT Dirt Logic 2.25 reservoir shocks and TWO FTS810052 REAR Dirt Logic 2.25 non-reservoir shocks: FOUR new dampers total. No front coilover conversion is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required. Read FT22389i, FT22390i, FT22219i and the instructions supplied with the selected shocks. Verify the complete kit and factory alignment before work.\u003c\/li\u003e\n\u003cli\u003eInstallation requires removing front springs and shocks, fitting the new coils and shocks, replacing the radius arms and pitman arm, relocating the track bar and steering stabilizer, and fitting sway-bar and brake-line brackets.\u003c\/li\u003e\n\u003cli\u003eThe front bumpstop procedure requires 1\/2-inch holes in the factory cups and mounting holes, plus a 1-1\/4-inch access hole in each frame rail for the supplied nut tabs. Follow the exact manual measurements and protect bare metal.\u003c\/li\u003e\n\u003cli\u003eRemove previously installed radius-arm drop brackets where applicable. Install the correct handed rear blocks and U-bolts; rear blocks replace the factory blocks. Nominal system lift does not mean the same amount of added rear height.\u003c\/li\u003e\n\u003cli\u003eUse the exact listed reservoir front shocks and non-reservoir rear shocks; do not substitute other shock numbers from generic instruction examples. Verify line and tire clearances, align to factory specifications, adjust headlights and recheck fasteners after 50 miles and periodically.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePublished manufacturer guidance: 38\/12.50R17 on 17×9 wheels with 4-3\/4-inch backspacing, 38\/12.50R18 on 18×9 with 4-3\/4-inch backspacing, or 38\/12.50R20 on 20×9 with 5-inch backspacing, with minor trimming. The listed 40-inch combinations require cutting.\u003c\/li\u003e\n\u003cli\u003eThe front-system manual gives more conservative 37-inch examples with trimming. Verify actual clearance with the installer; tire sizes are guidance, not guaranteed clearance. Wheels and tires are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K2434DL. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/6%e2%80%b3-fts-x-radius-arm-system-w-front-dirt-logic-2-25-resi-shocks-rear-dirt-logic-shocks-k2434dl\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084090298668,"sku":"K2434DL","price":4270.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/K2434DL.jpg?v=1793870932","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k2434dl-481923","provider":"Lee Mods inc.","version":"1.0","type":"link"}