{"product_id":"pdm-bkbn-k7107m-95e544","title":"Fabtech K7107M 3-Inch Ball Joint UCA Lift Kit with Rear Stealth Shocks — 2022–2024 Tundra 4WD, Rear Coils","description":"\u003cp\u003eFabtech K7107M combines ball-joint upper control arms, front strut and rear coil-spring spacers, differential-drop brackets and two rear Stealth monotube shocks. Factory front coilovers and rear coil springs are retained.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2022–2024 Toyota Tundra SR, SR5, Limited, Platinum or 1794 Edition; non-hybrid, 4WD, CrewMax, with actual factory rear COIL springs and without Adaptive Variable Suspension (AVS). Confirm the powertrain, cab, rear spring type and installed equipment before ordering.\u003c\/li\u003e\n\u003cli\u003eDoes not fit TRD Pro, Capstone, hybrid\/i-FORCE MAX, AVS, factory rear air suspension, Double Cab, RWD or vehicles already fitted with an aftermarket lift or lowering system. Other years and trims are outside this listing.\u003c\/li\u003e\n\u003cli\u003eNominal 3-inch suspension system. One complete K7107M system is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS26133 ball-joint upper control-arm kit: driver and passenger arm pair, eight bushing halves, four sleeves, eight pivot washers, two ball-joint washers, bearing caps, ABS-line clamps and specified assembly hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26106 spacer kit: two front strut spacers, two rear coil spacers, driver\/passenger rear bumpstop brackets, front bumpstop spacers, brake-line brackets, body-mount weld plates and specified hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26132 front differential-drop kit: driver and passenger brackets, four bushings, two sleeves, backing spacer plate and specified mounting hardware.\u003c\/li\u003e\n\u003cli\u003eTwo FTS6188 rear Stealth monotube shocks: TWO new dampers total, both rear. Replacement front coilovers and replacement springs are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required. Read the exact FTS26133, spacer-kit and FTS26132 differential-drop instructions before work; inspect the stock suspension and record factory alignment.\u003c\/li\u003e\n\u003cli\u003eRetain the factory front coilovers with the supplied spacers. The front strut studs must be trimmed to the specified 3\/4-inch retained length; follow the spacer instructions and their mounting sequence.\u003c\/li\u003e\n\u003cli\u003eInstall the ball-joint arms with barrel gussets upward and the specified bushings, sleeves, washers, caps and ABS-line clamps. Follow the arm guide for air-box\/computer-module removal and reinstallation.\u003c\/li\u003e\n\u003cli\u003eSupport and reposition the front differential using the supplied driver\/passenger brackets, bushings, sleeves and backing plate; relocate the differential sensor-wire bracket as instructed.\u003c\/li\u003e\n\u003cli\u003eThe rear coil branch requires two 7\/16-inch holes drilled in each upper rear coil mount using the supplied template. Retain and reinstall the factory coil springs and isolators.\u003c\/li\u003e\n\u003cli\u003eCut the rear bumpstop brackets and install the supplied extensions and brake-line brackets. Fit both rear Stealth shocks using the specified lower-mount spacers and sleeves.\u003c\/li\u003e\n\u003cli\u003eFor 35-inch tires, the instructions additionally require body-mount cutting and welding the supplied reinforcement plates. Other wheel\/tire combinations may require trimming; check actual clearance.\u003c\/li\u003e\n\u003cli\u003eCheck brake hoses, ABS wiring, tire and suspension clearances through steering and suspension travel. Align to factory specifications, adjust headlights, and recheck fasteners after 50 miles and periodically.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eManufacturer guidance: 295\/60R20 tires on 20×9 wheels with 5-inch backspacing, with minor trimming. Verify the actual vehicle clearance. Wheels and tires are sold separately.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K7107M. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/3-sport-ball-joint-uca-kit-k7107m\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084094951724,"sku":"K7107M","price":1679.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/K7107M_NEW.jpg?v=1793874884","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k7107m-95e544","provider":"Lee Mods inc.","version":"1.0","type":"link"}