{"product_id":"pdm-bkbn-k7108m-e517a8","title":"Fabtech K7108M 3-Inch Ball Joint UCA Lift Kit with Rear Stealth Shocks — 2024 Tundra Limited 4WD, Rear Air","description":"\u003cp\u003eFabtech K7108M combines ball-joint upper control arms, front strut and factory rear-air spacers, differential-drop brackets and two rear Stealth monotube shocks. Factory front coilovers and rear air springs are retained.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Toyota Tundra Limited only; non-hybrid, 4WD, CrewMax, with factory Load-leveling Rear Height Control AIR suspension and without Adaptive Variable Suspension (AVS). Confirm the factory rear-air option, non-hybrid powertrain and absence of AVS on the Toyota build sheet or dealer VIN record before ordering.\u003c\/li\u003e\n\u003cli\u003eDoes not fit hybrid\/i-FORCE MAX, AVS, TRD Pro, Capstone, Double Cab, RWD, rear coil springs, aftermarket air-assist bags or aftermarket lift\/lowering systems. SR, SR5, Platinum, 1794 Edition and all unlisted years are outside this listing.\u003c\/li\u003e\n\u003cli\u003eNominal 3-inch suspension system. One complete K7108M system is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS26133 ball-joint upper control-arm kit: driver and passenger arm pair, eight bushing halves, four sleeves, eight pivot washers, two ball-joint washers, bearing caps, ABS-line clamps and specified assembly hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26107 rear-air spacer kit: two front strut spacers, driver\/passenger rear air-spring spacers, driver\/passenger height-sensor brackets, rear bumpstop brackets, front bumpstop spacers, brake-line brackets, body-mount weld plates and specified hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26132 front differential-drop kit: driver and passenger brackets, four bushings, two sleeves, backing spacer plate and specified mounting hardware.\u003c\/li\u003e\n\u003cli\u003eTwo FTS6188 rear Stealth monotube shocks: TWO new dampers total, both rear. Replacement front coilovers, replacement air springs and an aftermarket air-assist system are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required. Read the exact FTS26133, spacer-kit and FTS26132 differential-drop instructions before work; inspect the stock suspension and record factory alignment.\u003c\/li\u003e\n\u003cli\u003eRetain the factory front coilovers with the supplied spacers. The front strut studs must be trimmed to the specified 3\/4-inch retained length; follow the spacer instructions and their mounting sequence.\u003c\/li\u003e\n\u003cli\u003eInstall the ball-joint arms with barrel gussets upward and the specified bushings, sleeves, washers, caps and ABS-line clamps. Follow the arm guide for air-box\/computer-module removal and reinstallation.\u003c\/li\u003e\n\u003cli\u003eSupport and reposition the front differential using the supplied driver\/passenger brackets, bushings, sleeves and backing plate; relocate the differential sensor-wire bracket as instructed.\u003c\/li\u003e\n\u003cli\u003eFollow the air-suspension branch: safely deflate and disconnect the air springs as instructed. Cut the lower air-spring mounting stud, drill its location to 7\/16 inch, then mark and drill the second 7\/16-inch spacer-mount hole on each side. Fit the correct driver\/passenger spacers.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied driver\/passenger height-sensor brackets, reposition the adjustment rods as specified, and reconnect the factory air lines. Follow the exact air-suspension procedure; do not substitute the rear-coil spacer branch.\u003c\/li\u003e\n\u003cli\u003eCut the rear bumpstop brackets and install the supplied extensions and brake-line brackets. Fit both rear Stealth shocks using the specified lower-mount spacers and sleeves.\u003c\/li\u003e\n\u003cli\u003eFor 35-inch tires, the instructions additionally require body-mount cutting and welding the supplied reinforcement plates. Other wheel\/tire combinations may require trimming; check actual clearance.\u003c\/li\u003e\n\u003cli\u003eCheck brake hoses, ABS wiring, tire and suspension clearances through steering and suspension travel. Align to factory specifications, adjust headlights, and recheck fasteners after 50 miles and periodically.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eManufacturer guidance: 295\/60R20 tires on 20×9 wheels with 5-inch backspacing, with minor trimming. Verify the actual vehicle clearance. Wheels and tires are sold separately.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K7108M. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/3-sport-ball-joint-uca-kit-k7108m\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084094984492,"sku":"K7108M","price":1535.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/K7108M.jpg?v=1793874884","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k7108m-e517a8","provider":"Lee Mods inc.","version":"1.0","type":"link"}