{"product_id":"pdm-bkbn-k7114dl-49ea18","title":"Fabtech K7114DL 3-Inch Lift Kit with Front \u0026 Rear Dirt Logic Reservoir Shocks — 2025 4Runner TRD Sport 4WD","description":"\u003cp\u003eFabtech K7114DL supplies a complete matched suspension system with ball-joint upper control arms, front Dirt Logic reservoir coilovers, rear Dirt Logic reservoir shocks, differential-drop brackets and rear coil spacers.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2025 Toyota 4Runner TRD Sport, 4WD, non-hybrid, with factory rear coil springs and without Adaptive Variable Suspension (AVS). Confirm the exact trim, drivetrain, rear springs and installed equipment before ordering.\u003c\/li\u003e\n\u003cli\u003eThis listing covers the TRD Sport configuration only. SR5, TRD Sport Premium, TRD Off-Road and Premium, Limited, Platinum, TRD Pro, Trailhunter, hybrid, RWD and all other years are outside this listing.\u003c\/li\u003e\n\u003cli\u003eNominal 3-inch system. One complete K7114DL system is supplied; factory rear coil springs are retained.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS26123 ball-joint upper control-arm kit containing the driver\/passenger arm pair and specified bushings, sleeves, washers, caps, ABS-line clamps and hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26131 differential-drop kit with driver, passenger and rear brackets, six bushings, three sleeves and specified installation hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26135 rear coil-spacer kit: two coil spacers, driver\/passenger rear bumpstop extensions, two bumpstop spacers and specified hardware.\u003c\/li\u003e\n\u003cli\u003eOne FTS26137 front Dirt Logic 2.5 reservoir-coilover PAIR: driver FT82087D and passenger FT82087P, two upper mounts, two reservoir brackets, specified upper\/inner-lower\/outer-lower misalignments, clamps and hardware.\u003c\/li\u003e\n\u003cli\u003eTwo FTS80173 rear Dirt Logic 2.25 remote-reservoir shocks. FOUR new dampers total, with remote reservoirs on both the front and rear pairs. The Sport kit front strut\/preload spacers are not part of this system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required. Inspect the complete matched system and factory suspension, record alignment, and read all supplied component instructions before work.\u003c\/li\u003e\n\u003cli\u003eInstall the front upper mounts with their locating notches toward the outside; fit the correct inner and outer lower misalignments, with the larger lower misalignment outward. Keep the factory-set coils and reservoir hoses assembled.\u003c\/li\u003e\n\u003cli\u003eThe front reservoir brackets require 17\/64-inch pre-drilled frame holes for the supplied self-tapping fasteners and clamps. Route and secure all reservoir hoses clear of tires and suspension travel.\u003c\/li\u003e\n\u003cli\u003eSupport and reposition the front differential using all three supplied brackets and specified hardware. Install the ball-joint arms with the required bushings, sleeves, washers, caps and ABS-line clamps.\u003c\/li\u003e\n\u003cli\u003eThe linked upper-arm guide specifies a coil-bucket lip clearance cut. Follow the exact supplied kit procedure and locations.\u003c\/li\u003e\n\u003cli\u003eThe rear guide requires drilling the three upper coil-mount holes on each side to 7\/16 inch and cutting the specified rear bumpstop brackets. Install the spacers with the factory coil springs and isolators, then the rear reservoir shocks using their supplied instructions.\u003c\/li\u003e\n\u003cli\u003eCheck hose, wire, tire and suspension clearances through full steering and suspension travel. Align to factory specifications, adjust headlights and recheck fasteners after 50 miles and periodically.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eManufacturer guidance: up to 285\/70R17 tires. Actual clearance depends on the wheel and vehicle configuration; check before installation. Wheels and tires are sold separately.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K7114DL. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/3-uca-kit-w-dirt-logic-2-5-resi-coilovers-rear-dirt-logic-2-25-resi-shocks-k7114dl\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084095344940,"sku":"K7114DL","price":3905.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/DIRT-LOGIC-K7114DL-4Runner-3in-Suspension-System.jpg?v=1793878732","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k7114dl-49ea18","provider":"Lee Mods inc.","version":"1.0","type":"link"}