{"product_id":"pdm-bkbn-k9009-545373","title":"Fabtech K9009 1.5-Inch Coil Assist Kit without Struts or Shocks — 2015–2021 Sprinter 3500 4WD","description":"\u003cp\u003eFabtech K9009 supplies front coil-assist springs and seats, rear block\/bumpstop hardware and front hub spacers. Struts and shocks are purchased separately.\u003c\/p\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015–2021 Mercedes-Benz Sprinter 3500 4WD with factory suspension and the factory front hub adapters shown in FT28002. Verify the year, model, drivetrain and hub configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eThis 3500 package uses FTS28010 rear hardware and FTS28002 front hub spacers. Sprinter 2500, 2WD and later AWD applications are outside this listing.\u003c\/li\u003e\n\u003cli\u003eNominal 1.5-inch system; the manufacturer describes approximately 1–1.5 inches of front lift. Actual stance depends on the vehicle and load.\u003c\/li\u003e\n\u003cli\u003eFor use with separately purchased compatible Bilstein B4 struts and the specified Fabtech rear shocks. This package is not a complete damping system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne FTS28012 front coil-assist kit: two FT88942 coil springs, two each FT19000 lower perches, FT19001 support washers and FT19002 upper perches, plus specified FT19015 subassembly. No struts or shocks included.\u003c\/li\u003e\n\u003cli\u003eOne FTS28010 rear box: two combined block\/bumpstop units, four U-bolts, ten FT120 spacers, linkage bracket and specified hardware. The new units replace the factory block\/bumpstop units.\u003c\/li\u003e\n\u003cli\u003eOne FTS28002 front hub-spacer kit: two FT19007 spacers, twelve M14-1.5 × 65mm bolts and specified thread-locking compound. Fits behind the factory front hub adapters; factory wheel lug nuts are retained.\u003c\/li\u003e\n\u003cli\u003eCompatible Bilstein B4 struts and the specified FTS7231 Performance or FTS81163 Dirt Logic rear shocks are required separately. No auxiliary shock mounts or auxiliary shocks are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional installation required on a stock vehicle. Read FT28003, FT28010 and FT28002 before installation and inspect the suspension and alignment.\u003c\/li\u003e\n\u003cli\u003eFT28003 covers FTS28012 without struts. Retain the factory upper strut mounts and assemble the compatible separately purchased B4 struts, support washers, perches and coil springs as instructed.\u003c\/li\u003e\n\u003cli\u003eReplace the factory rear block\/bumpstop units using FTS28010. Use two FT120 spacers per U-bolt and one FT120 behind each upper rear shock mount, following FT28010.\u003c\/li\u003e\n\u003cli\u003eRemove the factory front hub adapters, install the FTS28002 spacers behind them and refit the adapters using the supplied bolts and thread-locking compound. Follow all specified torque values.\u003c\/li\u003e\n\u003cli\u003eCheck tire, brake-hose and ABS-wire clearances through steering travel, align to factory specifications and adjust headlights. Recheck fasteners and wheel hardware after 50 miles and periodically as directed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTire and wheel guidance\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eManufacturer reference: front 275\/75R16 tires on 16×5.5 wheels with 8-inch backspacing and minor trimming; rear 275\/75R16 tires on 16×5.5 wheels with −2.16-inch backspacing. Verify clearance on the actual vehicle. Wheels and tires are sold separately.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eManufacturer part number: K9009. \u003ca href=\"https:\/\/fabtechmotorsports.com\/product\/1-5-coil-assist-kit-no-shocks-k9009\/\"\u003eManufacturer product details\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":54084085055788,"sku":"K9009","price":1315.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/k9009-kit.jpg?v=1789695664","url":"https:\/\/lee-mods.com\/products\/pdm-bkbn-k9009-545373","provider":"Lee Mods inc.","version":"1.0","type":"link"}