{"product_id":"pdm-cfrl-751066erl-b6e803","title":"Earl's Vapor Guard EFI Fuel Hose - 3\/8 Inch, 10 Feet","description":"\u003cp\u003eModern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads to potentially dangerous leaks \u0026amp; weeping as well as vapors that waste  fuel and leave unwanted odors in your shop.                                                            \n\nOnce fuel lines are degraded, hose particles can contaminate and obstruct fuel injectors and carburetor passages.  Earl's Vapor Guard  hose and hose ends provide a complete, economical solution that virtually eliminates these fuel permeation issues common with most rubber fuel lines. \n\nThe secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard™ Barrier is a Thermoplastic layer that provides superior  fuel isolation and virtually eliminates vapors from escaping through the hose.   The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMulti-layer rubber hose designed to withstand to the corrosive properties of modern fuels\u003c\/li\u003e\n\u003cli\u003eMulti-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel, E-85, 100% Methanol, ETHANOL and Gasohol fuels\u003c\/li\u003e\n\u003cli\u003eA two foot section of Earl's Vapor Guard saves one gallon of gas each year as compared to traditional rubber hose from permeation alone\u003c\/li\u003e\n\u003cli\u003ePrimary Barrier Liner initial layer offers high resistance to heat and aggressive fuels\u003c\/li\u003e\n\u003cli\u003eVapor Guard Barrier Thermoplastic layer provides superior fuel isolation significantly reducing vapors from escaping through the hose\u003c\/li\u003e\n\u003cli\u003eReinforcement braid-aramid material (EFI hose only) is used to provide the higher pressure rating that is required with fuel injection\u003c\/li\u003e\n\u003cli\u003eExterior cover  provides extreme tolerance of heat and ozone\u003c\/li\u003e\n\u003cli\u003eChoose from carburetor or higher pressure EFI hose\u003c\/li\u003e\n\u003cli\u003eHose available in 5\/16 and 3\/8 sizes\u003c\/li\u003e\n\u003cli\u003eNot for use in applications where the hose is submersed in fuel\u003c\/li\u003e\n\u003cli\u003eFuel Injection Hose – Rated Maximum 225 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Earl's\u003c\/li\u003e\n\u003cli\u003eCategory: Plumbing AN Fittings and Hose\u003c\/li\u003e\n\u003cli\u003eCompatible Hose Ends: Vapor Guard\u003c\/li\u003e\n\u003cli\u003eEmission Code: 5\u003c\/li\u003e\n\u003cli\u003eFluid Type: Race Gas\u003c\/li\u003e\n\u003cli\u003eFluid Type: Coolant\u003c\/li\u003e\n\u003cli\u003eFluid Type: Pump Gas\u003c\/li\u003e\n\u003cli\u003eFluid Type: Bio-Fuels\u003c\/li\u003e\n\u003cli\u003eFluid Type: Diesel\u003c\/li\u003e\n\u003cli\u003eFluid Type: E85\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Bio-Fuels: 4 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Coolant: 5 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Diesel: 4 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - E85: 3 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Methanol\/Alcohol: 2 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Pump Gas: 4 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFluid Type Rating - Race Gas: 4 out of 5 Rating\u003c\/li\u003e\n\u003cli\u003eFuel System Type: EFI\u003c\/li\u003e\n\u003cli\u003eHose Family: Vapor Guard\u003c\/li\u003e\n\u003cli\u003eHose Length: 10 Feet\u003c\/li\u003e\n\u003cli\u003eHose Size: 3\/8\u003c\/li\u003e\n\u003cli\u003eMax PSI: 225\u003c\/li\u003e\n\u003cli\u003eMax Vacuum: 10 inHg\u003c\/li\u003e\n\u003cli\u003eMin. Bend Radius: 2.5 in.\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: .625 in.\u003c\/li\u003e\n\u003cli\u003epart type: Fuel Hose\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hose\u003c\/li\u003e\n\u003cli\u003eSubmersible in Fuel: No\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°F to 275°f\u003c\/li\u003e\n\u003cli\u003eWarning: California Proposition 65\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUniversal application. Confirm dimensions and installation requirements.\u003c\/p\u003e\u003cp\u003eInstallation: Use with Vapor Guard hose ends and clamps.\u003c\/p\u003e\u003cp\u003eDo not submerge this hose in fuel. Not recommended for vacuum applications. Other hose barb fittings may damage the inner liner.\u003c\/p\u003e","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":54059399971116,"sku":"751066ERL","price":84.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8659\/3580\/files\/1886b8651d5797e468d603e03038aa39.jpg?v=1789180665","url":"https:\/\/lee-mods.com\/products\/pdm-cfrl-751066erl-b6e803","provider":"Lee Mods inc.","version":"1.0","type":"link"}