1/4 Inch NBR Fuel Line Hose - 10 Foot Length
K2 Industries
1/4 Inch NBR Fuel Line Hose - 10 Foot Length
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
1/4 Inch NBR Fuel Line Hose — 10 Foot Length
NBR rubber fuel line rated for carburetor and fuel injection systems. Ten feet of 1/4-inch hose gives you room to route cleanly from tank to engine bay without patching multiple sections together. Built tough for street and strip use.
Key Features
- NBR Rubber Compound - Resists fuel degradation and temperature swings without cracking or leaking.
- Universal 1/4-Inch Diameter - Fits standard carb and EFI fuel line connections across most fuel systems.
- Single 10-Foot Section - One continuous run eliminates mid-line splices and reduces potential failure points.
Specs
- Material: NBR Rubber
- Diameter: 1/4 Inch
- Length: 10 Feet
- Condition: New
Whats Included
- 1x 1/4 Inch NBR Fuel Line Hose (10 Feet)
Frequently Asked Questions
Do I need hose clamps to connect this?
Hose clamps are not included with this hose. You'll need to source worm-gear or spring clamps to secure each end to your fuel line fittings — standard sizes work fine with 1/4-inch hose.
Can I use this on a high-pressure fuel injection system?
NBR hose handles standard carb and EFI pressures without issue. If you're running forced induction or direct injection above typical pump pressure, check your system specs first — this is general-duty fuel line.
Will this hose need prep before I install it?
No prep required. Cut to length as needed, slide onto your barbed fittings, and clamp it down. Make sure both ends are fully seated before tightening clamps.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-6608-UNV-006-FC |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information