2.00" x 12" Black Silicone Hose - 3-Ply Construction
K2 Industries
2.00" x 12" Black Silicone Hose - 3-Ply Construction
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
2.00" x 12" Black Silicone Hose — 3-Ply Construction
High-temp silicone hose rated for coolant, vacuum, and boost lines on serious builds. The 3-ply construction handles pressure cycles without degrading, and the 2-inch diameter fits common turbo and intercooler applications. Black finish matches most engine bay setups.
Key Features
- 3-Ply Silicone Core - Resists oil, coolant, and fuel without cracking or swelling.
- 2.00" ID Diameter - Direct swap or custom plumbing for turbo applications and intercooler piping.
- 12" Straight Section - Pre-cut length eliminates measuring; use as-is or cut to fit your routing.
Specs
- Material: Silicone
- Internal Diameter: 2.00"
- Length: 12"
- Construction: 3-Ply
- Color: Black
What's Included
- 1x 2.00" x 12" Black Silicone Hose
Frequently Asked Questions
Will this hose work for both coolant and boost lines?
Yes. The 3-ply silicone core handles coolant temps, vacuum draw, and moderate boost pressure. For high-boost setups pushing over 20 psi sustained, confirm your system pressure against silicone's rated limits.
Do I need clamps, and what size?
Clamps are not included. You'll need hose clamps sized for 2.00" OD — typically 2-1/4" or 2-1/2" worm-drive or band clamps, depending on your fitting design.
Can I cut this hose to a shorter length?
Absolutely. Use a sharp utility knife or hose cutter for a clean edge. After cutting, let the exposed end sit for a few minutes before installing to avoid silicone dust in your coolant or intake.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1334-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information