2.50" to 2.75" Silicone Reducer Hose 3-Ply 90 Degree Red
K2 Industries
2.50" to 2.75" Silicone Reducer Hose 3-Ply 90 Degree Red
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
2.50" to 2.75" Silicone Reducer Hose 3-Ply 90 Degree Red
Step down from 2.50" to 2.75" with this 90-degree silicone reducer hose built for boost systems and coolant lines. Three-ply construction handles heat and pressure without flex or failure. The 90-degree bend is pre-molded—no custom bending required.
Key Features
- 3-Ply reinforcement - Resists kinking and collapse under boost or coolant pressure.
- Pre-bent 90-degree elbow - Fits tight engine bay layouts without custom fabrication.
- Red silicone - Withstands high temperatures and resists ozone degradation.
Specs
- Material: Silicone, 3-ply reinforced
- Configuration: 90-degree reducer elbow
- Size: 2.50" to 2.75" step-down
- Condition: New
What's Included
- One 2.50" to 2.75" silicone reducer hose, 90-degree bend
Frequently Asked Questions
What size clamps do I need?
You'll want worm-gear or T-bolt clamps that fit 2.50" and 2.75" diameter hose. Bring the hose to your local speed shop or parts counter—they can size it on the spot. Don't guess on clamp diameter.
Can I use this for coolant or just boost?
Silicone handles both. This hose works for turbo/supercharger charge piping and coolant bypass lines. Temperature range depends on the system—verify your application's max temp against silicone specs before installing.
Do I need to do anything to the hose before installing it?
Wipe the inside of the hose before connecting it. Any debris from the warehouse or previous handling will cause a leak. That's it—no priming or sealing needed on silicone.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1447-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information