2.50" to 2.75" Silicone Reducer Hose with 90 Degree Bend - Blue
K2 Industries
2.50" to 2.75" Silicone Reducer Hose with 90 Degree Bend - Blue
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
2.50" to 2.75" Silicone Reducer Hose with 90 Degree Bend — Blue
Stepped silicone hose that transitions from 2.50" to 2.75" diameter with a 90-degree elbow bend. Built for coolant, intercooler, and custom intake plumbing where diameter step-down or step-up is needed. The 90-degree angle eliminates the need for separate 45-degree elbows in tight engine bay spaces.
Key Features
- 90-degree elbow design - Saves space in cramped engine bays and reduces clamp count vs. separate elbows
- Diameter transition - Handles step changes between 2.50" and 2.75" hose sizes in a single piece
- Silicone material - Handles high coolant temps and resists oil, fuel, and UV without cracking
Specs
- Material: Silicone
- Configuration: 90-degree elbow reducer
- Port sizes: 2.50" to 2.75"
- Quantity: 1 hose
What's Included
- Reducer hose (1x)
Frequently Asked Questions
Do I need hose clamps to install this?
Yes — you'll need clamps at both the 2.50" and 2.75" ends. The hose itself is the fitting; clamps secure it to your hard lines or other hose barbs.
Can this handle coolant and intercooler water lines?
Silicone handles both. It's stable in high-temp coolant systems and rated for intercooler duty. Just verify your system pressure stays within silicone's rated limits before final assembly.
Will this fit if I need the 2.75" end first and 2.50" second?
The hose is designed as 2.50" to 2.75". If you need the reverse orientation, test-fit first or contact us with your line diagram to confirm the bend direction works for your layout.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1446-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information