2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing Mild Steel
K2 Industries
2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing Mild Steel
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
2" to 2.15" Flared 45 Degree Exhaust Pipe Bend Tubing — Mild Steel
Mandrel-bent mild steel exhaust tubing with precision 45-degree flare for custom fabrication and repair work. This tubing handles transitions between 2" and 2.15" diameters with smooth internal flow, eliminating turbulence at the joint. Mild steel construction accepts welding, bending, and painting without brittleness.
Key Features
- 45-Degree Flare - Creates smooth diameter transition without stepped edges or flow restriction.
- Mandrel Bent - Inner radius stays consistent; no kinks or collapse during installation or welding.
- Bare Mild Steel - Accepts TIG/MIG welding directly and takes primer and paint without surface prep complications.
Specs
- Material: Mild Steel
- Diameter Range: 2" to 2.15"
- Bend Angle: 45 Degrees
- Construction: Mandrel-Bent
What's Included
- 1x Exhaust Pipe Bend Tubing
Frequently Asked Questions
Can I weld this directly, or does it need surface prep?
Weld it as-is. Bare mild steel takes TIG and MIG without wire feed issues. Just clean the joint area before you strike an arc to keep your bead clean.
Do I need to paint this before or after installation?
Either works. Bare steel will start to surface rust if left exposed, so prime and paint it soon after welding. Paint after install if the finished position makes prep easier; prime it before if you want to move it around your shop first.
Will this bend or collapse if I try to reshape it?
Mandrel bending keeps the tube round inside, but mild steel is relatively soft—cold bending by hand will kink it. Use a proper exhaust bender or heat it and work slowly if you need to adjust the angle.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-13563-UNV-006-EXH |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information