3-Ply Silicone 90 Degree Elbow Hose 1.25" - Blue
K2 Industries
3-Ply Silicone 90 Degree Elbow Hose 1.25" - Blue
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
3-Ply Silicone 90 Degree Elbow Hose 1.25" — Blue
Reinforced silicone elbow designed to handle high-temp coolant and intercooler lines without splitting or collapsing. The 3-ply construction and 90-degree geometry make this a direct swap for factory radiator hoses or custom cooling setups. Bends smoothly without kinking.
Key Features
- 3-Ply Silicone Wall - Resists collapse under boost and sustained heat cycles better than single-layer hose.
- 90-Degree Elbow Geometry - Eliminates the need for multiple connectors; routes coolant directly where you need it.
- 1.25" ID - Matches common radiator hose and intercooler outlet sizes without reducer fittings.
Specs
- Material: Silicone
- Configuration: 90-degree elbow
- Inside Diameter: 1.25"
- Condition: New
- Quantity: 1 piece
Whats Included
- 3-Ply Silicone 90 Degree Elbow Hose 1.25" — Blue
Frequently Asked Questions
Will this hose handle boost pressure or just coolant flow?
This is rated for coolant and water circulation in high-heat environments. If you're running it on a pressurized intercooler setup, confirm your system PSI matches silicone hose ratings — most handle 30+ PSI without issue, but verify your specific application before install.
Do I need hose clamps, and what size?
You'll need clamps to secure both ends of the elbow to your hose barb fittings or ports. Clamps are not included — grab stainless steel worm-gear clamps sized to match your 1.25" ID hose for reliable grip.
Can I use this straight out of the box, or does it need prep?
No prep needed. Silicone hose ships ready to install. If you're replacing an old hose, flush the cooling system or intercooler loop first to avoid debris blocking the new line.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1404-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information