Distressed American Flag Front Sidemarker Overlays - 2016-2023 Tacoma Halogen

Product information from StickerFab

Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.

• Easy to apply
• Printed on clear vinyl (laminated for long life)
• Sold as a pair (left and right)
• Installation video below

Distressed American Flag Overlays (Front Only, Printed Series)

When you're trying to achieve a certain theme, sidemarkers can stick out like a sore thumb.  There's an easy way to make them less noticeable (light can still pass through at night), without spending a lot of money.  That smoked look is achievable through vinyl.

We can fully print a number of designs on these sidemarkers.  Please contact us with your ideas, and we may just add them!

Sold as a pair (left and right).

Instructions

These install the same as our other sidemarker overlays.  Please use the video below for reference.

Items you may want to have:

• Detail Spray (without wax) or glass cleaner
• Microfiber Towel or Paper Towel
• Stickerfab Application Fluid or dish with soapy water (drop of dish soap + 1 cup of water)
• Felt Lined Squeegee 
• Heat gun or hair dryer (optional)
  
  

3 items are available in this kit.

Clean the application area to prepare it for installation.  Do not use a spray with any type of wax in it.

The overlays are labeled.

Ideal installation temperature is 75-85 degrees.  If it is warm, do this install in the shade.  Clean the installation area and 1" around that area.  Wet the sidemarker and then wet the vinyl.  Apply the vinyl and when you are happy with the alignment, start to push out the installation fluid.  Use a squeegee to help you get it all out.  Dry the vinyl and if needed, use LIGHT heat to push the vinyl around the edges.