• Add contrasting color
• 8 piece kit

Fender Vent Overlays for 2022+ Bronco Raptor

A customer requested we tackle these fender vents on the 2022+ Ford Bronco Raptor.  This kit consists of 8 pieces that come together to add some nice contrast to your vehicle.

Installation

Recommended Items:

• Quick detailer without wax (for cleaning the application area)
• Microfiber
• StickerFab Application Fluid or Soapy Water (1 drop dish soap per cup of water)
• Felt Tip Squeegee
• Heat gun or hair dryer (optional)

3 item kit (microfiber, installation fluid, squeegee)

Ideal install temperature is 70-80 degrees.  If it is warm, do the install in the shade.  Vice versa if it is cooler.  Clean the surface of the fender and surrounding area.  Spray the surface again with StickerFab application fluid and do the same to the overlay as you peel it off the backing paper.  This fluid will let you align the material perfectly and prevent it from sticking to itself.  

Wet the application area and the back of the vinyl.  You'll be starting with the rear vent and then working your way forward.  The initial install just involves aligning all the pieces to the desired look so keep the vinyl and application area very wet.  Once you're happy with the alignment, then you can start pushing out more of the fluid.

If you need to apply light heat for the edges to dry out and stick, go ahead.  You can also wait for some of the fluid to dry on it's own, but make sure there are no bubbles before allowing to dry.