Fabtech FTS22276 Rear Sway Bar Link Kit – 2017–2020 Ford F250/F350 4WD, K2266DL 8-inch System

Fabtech FTS22276 is an extended rear sway bar link kit. It replaces the two rear end links so the factory rear sway bar can move through the travel of the specified Fabtech suspension.

Verified applications

2017–2020 Ford F250/F350 4WD diesel, non-dually, without the Tremor package, equipped with a factory rear sway bar and the complete K2266DL 8-inch Fabtech system. This application requires the original rear sway bar and its frame brackets. It does not add a sway bar to a vehicle without one.

Package

Quantity 1 purchases one kit for both rear links. The manufacturer parts list specifies:

• Two FT30784 rear sway bar end links
• Eight FT1004 bushing halves
• One FT50089 four-pack of sleeves
• FT30792 hardware kit: four 1/2-13 × 2-1/2-inch bolts, eight washers, four nuts and thread-locking compound

The factory sway bar, factory frame brackets and frame mounting hardware are retained. This is a link kit; lift coils, suspension arms, track bar, rear lift blocks, shock absorbers and a complete lift system are not included.

Installation requirements

Use the complete matching Fabtech system and its specified shocks. The K2266DL system requires front driveshaft modification or a suitable aftermarket driveshaft; trucks with a two-piece driveshaft also require the separately sold FTS419. Retain the original rear sway bar frame brackets and frame hardware, and install the link bolts in the direction shown in the instructions. Check suspension, brake hose, ABS wire and tire clearance, alignment and fastener torque. Recheck fasteners after 50 miles and periodically thereafter.

Read the FTS22276 installation instructions and product warnings and the K2266DL system instructions before purchase and installation.