Fabtech FTS22345 Rear Track Bar Bracket Kit — 2021–2023 Ford Bronco 4WD, 3-inch or 4-inch Lift

Fabtech FTS22345 relocates the rear axle-side track-bar mounting point to help re-center the rear axle on a lifted Bronco. The formed, welded and gusseted bracket uses 1/4-inch steel.

Vehicle application

2021–2023 Ford Bronco 4WD, rear, with a compatible complete 3-inch or 4-inch Fabtech suspension system and Fabtech shocks. For 3-inch or 4-inch lift systems only. Confirm the complete suspension configuration before ordering.

Package

One rear track-bar bracket kit: one FT30991 bracket and FT31015 hardware subassembly. FT31014 hardware includes two 7/16-14 × 1-1/4-inch bolts, four washers and two locknuts; one 5/8-11 × 3-3/4-inch bolt, two washers and one locknut; and threadlocker. The track bar and other suspension components are separate.

Installation and photos

Professional installation requires drilling two 1/2-inch holes in the factory axle mount. The factory mounting bolt is reused with the supplied bracket hardware. Check axle position and clearance, follow all manufacturer warnings, and recheck fastener torque after 50 miles and periodically thereafter.

The primary photo shows the bracket. The retained installed photo illustrates bracket placement; the vehicle, track bar and other suspension parts shown are sold separately.

Manufacturer installation instructions and warranty terms.

California Proposition 65 warning: WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.