Fabtech K2303DL Front Coilover Conversion - 2017 F250 4WD Diesel with Fabtech 8-Inch Lift

Fabtech K2303DL is a front coilover conversion for a 2017 Ford F250 Super Duty 4WD diesel with an existing compatible Fabtech 8-inch suspension system. It will not work with leveling or basic systems. This is a front suspension upgrade, not a complete 8-inch lift system.

Package contents

Includes one FTS835237D driver and one FTS835237P passenger Dirt Logic 4.0 remote-reservoir front coilover: two front coilover assemblies, with their upper and lower mounting brackets and listed hardware. Rear shocks, rear lift components, 4-Link arms and the rest of the required suspension system are not included.

Installation

The factory upper coil spring buckets remain in place. Installation removes the original front shocks, coils, upper rubber isolators and lower spring perches; requires cutting and smoothing the upper locator tubes, drilling three mounting holes on each side, and relocating the ABS and brake-line brackets. Includes driver and passenger upper and lower coilover mounting brackets and listed hardware. Follow the applicable coilover instructions and verify reservoir-hose and suspension clearance.

Professional installation, alignment, headlight adjustment and full steering, brake-hose, ABS-wire, reservoir-hose and tire-clearance checks are required. Tire clearance must be checked on the vehicle; trimming may be required. Recheck fasteners after 50 miles and periodically thereafter. Confirm the existing suspension and vehicle configuration before ordering and follow the complete manufacturer instructions.

Manufacturer coilover installation instructions

WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.