Fabtech K3037 4.5-inch Lift Kit with Performance Shocks - 2013 Ram 2500 4WD Diesel

Fabtech K3037 is a 4.5-inch suspension lift system with replacement front coil springs, upper and lower control links, and four Performance shocks.

Vehicle application

2013 Ram 2500 4WD with the 6.7L six-cylinder diesel engine, single rear wheels, factory link-arm front suspension and leaf-spring rear suspension. Supported trims: Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST, SXT, Tradesman. Confirm the original suspension and exact vehicle configuration before ordering. This listing does not cover 3500 models, other model years, 2WD, gasoline engines, dual rear wheels, or radius-arm front suspension.

Package contents

Sold as one K3037 kit containing one FTS23031 component box, one FTS43000BK coil spring box, and four shocks.

• Two replacement front coil springs with separate shock absorbers.
• Two replacement upper control links and two replacement lower control links with bushings, sleeves and installation hardware; both factory upper and lower links are replaced.
• Pitman arm, track bar bracket, front bump stops, and driver/passenger sway bar drop brackets.
• Two rear lift blocks and four U-bolts; retain the factory rear blocks above the supplied blocks as directed in the instructions.
• Two FTS7237 front and two FTS7333 rear Performance shocks.

Installation

Professional installation is required. Follow Fabtech FT23031 and the applicable shock instructions. Removal of the passenger-side upper-link bolt requires cutting; lower coil-bucket notching and drilling may be needed for bracket clearance. Check steering, brake lines and ABS wiring throughout suspension travel. Align the vehicle, adjust headlights, and recheck fasteners after 50 miles. Tire clearance depends on wheel dimensions and vehicle configuration; oversized tires may require trimming.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.