Fabtech K4201DL 3-Inch Sport Lift Kit with Dirt Logic 2.25 Reservoir Shocks for 2021–2025 Jeep Wrangler JL 4xe 4-Door 4WD

Fabtech K4201DL is a 3-inch Sport suspension lift system for the 2021–2025 Jeep Wrangler JL 4xe four-door 4WD. It uses four replacement coil springs. This version includes four Dirt Logic 2.25 Reservoir Shocks.

Application

• 2021–2025 Jeep Wrangler JL 4xe plug-in hybrid; four-door; four-wheel drive only.
• Confirm the vehicle application and exact kit configuration before installation.

Package contents

• One FTS24302 Sport component box for one vehicle, including four replacement coil springs: two FT50943 front coils, one FT50606 driver-rear coil and one FT50607 passenger-rear coil.
• Two front and two rear sway-bar links, two front and two rear bump-stop spacers, a rear track-bar relocation bracket and the specified mounting hardware.
• Four replacement Dirt Logic 2.25 Reservoir Shocks: two FTS801402 front and two FTS801412 rear.

Features

• Dual-rate coil springs provide a compliant initial rate and added resistance as the suspension compresses.
• The rear track-bar relocation bracket centers the axle at the increased ride height. Bump-stop extensions and extended sway-bar links support the revised suspension geometry.

Installation and requirements

• Professional installation and alignment are required. Installation includes drilling the front spring perches, cutting and drilling the factory rear track-bar bracket and repositioning brake-line brackets.
• The front Dirt Logic reservoir-shock instructions require trimming the factory upper shock bucket and plastic inner liner for reservoir-hose clearance.
• Check brake hoses, ABS wires and tire clearance through full suspension and steering travel. Recheck fasteners after 50 miles and periodically afterward.

Tire and wheel guidance

• Check clearance through full steering and suspension travel. Fender configuration and trimming affect clearance.
• Stock fenders: 35/12.50R17 on 17×9 wheels with 4.5-inch backspacing, or 325/65R18 on 18×9 wheels with 4.5-inch backspacing; minor trimming.
• Stock fenders: 35/12.50R20 or 325/60R20 on 20×9 wheels with 5-inch backspacing; minor trimming.
• High-clearance fenders: 37/12.50R17 on 17×9 or 37/12.50R18 on 18×9 wheels with 4.5-inch backspacing, or 37/12.50R20 on 20×9 wheels with 5-inch backspacing; cutting required.

Vehicle photographs are illustrative demonstrations. Wheels, tires and other accessories shown are not included. The parts-layout photograph shows this kit configuration.

Manufacturer part number: K4201DL. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.