Fabtech K7009DL 6-Inch Basic Lift with Rear Dirt Logic Shocks for 2007–2015 Toyota Tundra 5.7L

Fabtech K7009DL is a 6-inch Basic suspension lift system for the Toyota Tundra. Extended steering knuckles and lower control-arm crossmembers reposition the front suspension, while a differential skid plate protects the drivetrain. Front coilover spacers retain the complete factory front shock and spring assemblies. Rear lift uses 3-inch blocks and U-bolts, with two rear Dirt Logic 2.25 nonreservoir shocks.

Application

• 2007–2015 Toyota Tundra 2WD or 4WD, Double Cab or CrewMax, 5.7L V8 with automatic transmission only.
• Does not fit TRD Pro models. Other cab, engine and transmission configurations are excluded.

Package contents

• Sold as one K7009DL vehicle system: one FTS26020BK component box 1, one FTS26021BK component box 2, one FTS26022BK front coilover spacer kit and two FTS810602 rear Dirt Logic 2.25 nonreservoir shocks.
• The component boxes include driver and passenger steering knuckles, front and rear lower control-arm crossmembers, differential drop brackets and skid plate, two impact struts with mounts, two 3-inch FTBK3 rear blocks, four FT1500U U-bolts, carrier-bearing spacers, sway-bar and brake-line brackets, weld-in plates and hardware.
• The FTS26022BK kit contains one FT70197BK driver-side and one FT70169BK passenger-side spacer, with eight washers and eight nuts. Factory front shocks and springs are reused; two new rear shocks are included.

Installation and requirements

• Professional installation and alignment are required. Installation includes cutting the original crossmember and body mounts, welding the specified reinforcement plates and body-mount gussets, drilling mounting areas and relocating brake/ABS-line brackets. Welding must be performed by a certified welder.
• Factory wheels and tires cannot be used. This system does not permit 17-inch wheels.
• Use the shock hardware and installation instructions specified for the selected package. Check steering, brake hoses, ABS wires and tire clearance through full travel. Recheck fasteners after 50 miles and periodically afterward.

Tire and wheel guidance

• 35/12.50R18 tires on 18×9 wheels with 5.5-inch backspacing; minor trimming.
• 35/12.50R20 tires on 20×9 wheels with 5.5-inch backspacing; minor trimming.

Manufacturer part number: K7009DL. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.