Fabtech K7012 0–2.5-Inch Adjustable Front Coilover Kit with Rear Performance Shocks for 2000–2005 Toyota Tundra

Fabtech K7012 provides adjustable front ride height from stock to 2.5 inches above stock for the Toyota Tundra. It combines two front Performance struts, replacement tapered coil springs and threaded adjustment parts with two rear Performance shocks.

Application

• 2000–2005 Toyota Tundra 2WD or 4WD.

Package contents

• Sold as one K7012 system: one FTS2400K front adjustable coilover kit and two FTS7236 Performance rear shocks.
• The front kit contains two FT2300S struts, two FT2400 tapered coil springs, two adjuster sleeves, two adjuster nuts, thrust washers, isolators, snap rings, set screws and one FTS98005 spanner wrench.
• Four replacement damping units in total: two front struts and two rear shocks. The factory front upper spring seats are reused during assembly. No rear lift blocks or replacement rear springs are included.

Installation and requirements

• Professional installation and coil-spring compressor work are required. The front assemblies require disassembly; retain the factory upper spring-seat components specified in the instructions.
• Adjust front ride height between 0 and 2.5 inches above the original measured height. Do not exceed 2.5 inches. Check toe, set final alignment and recheck ride height and fasteners after 50 miles.
• Larger tires require aftermarket wheels. Check suspension, steering, brake-line and tire clearance through full travel.

Tire and wheel guidance

• 285/75R16 tires on 16×8 wheels with 4-5/8-inch backspacing; minor trimming.

Manufacturer part number: K7012. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.

The retained legacy parts image is illustrative. Spring color and pictured hardware details can differ; refer to the current primary parts photograph for the current package.