Fabtech K7014 3-Inch Spindle Lift with Performance Shocks for 1995.5–2004 Five-Lug Toyota Tacoma 2WD

Fabtech K7014 provides 3 inches of front lift through replacement ductile-iron spindles for the five-lug Toyota Tacoma 2WD. It includes a rear add-a-leaf kit and four Performance shocks.

Application

• 1995.5–2004 Toyota Tacoma 2WD with five-lug wheels.
• Four-wheel-drive and six-lug PreRunner trucks are excluded.

Package contents

• Sold as one K7014 system: one FTS4130-7 spindle kit, one FTS200 rear add-a-leaf kit, two FTS7078 front Performance shocks and two FTS7163 rear Performance shocks.
• The spindle kit contains one FT4130-7D driver-side and one FT4130-7P passenger-side spindle, steering-arm inserts, cotter pins, ABS-wire clamps and specified hardware.
• Two rear add-a-leaves and four replacement shocks are included. The original front coil springs are retained; no replacement front coils or rear shackles are included.

Installation and requirements

• Professional installation and alignment are required. The factory steering arms and wheel-bearing assemblies are retained as directed. The original front dust shields are removed.
• ABS-equipped vehicles require the specified sensor-wire bracket relocation. Some sanding of the arm may be required for front shock clearance.
• Check brake-line clearance through full steering travel, verify front wheel-bearing adjustment and recheck clearances after the initial test drive. Recheck fasteners after 50 miles.

Tire and wheel guidance

• Larger tires require aftermarket wheels. Manufacturer guidance: 30/9.50R15 tires on 15×7 wheels with 3-3/4-inch backspacing, with minor trimming.

Manufacturer part number: K7014. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.