Fabtech K7044DL 4-Inch Tundra Ball-Joint UCA Lift Kit with Reservoir Coilovers and Rear Shocks

Fabtech K7044DL is a nominal 4-inch Tundra suspension system with ball-joint upper control arms, front Dirt Logic 2.5 reservoir coilovers and rear Dirt Logic 2.25 non-reservoir shocks.

Application

• 2007–2015 Toyota Tundra TRD 2WD/4WD with the 5.7L V8.
• This listing is limited to TRD models; non-TRD and TRD Pro applications are excluded.

Package contents

• One system per vehicle: one FTS26036 ball-joint UCA component box, one FTS26052 front Dirt Logic 2.5 reservoir-coilover pair and two FTS810982 rear Dirt Logic 2.25 non-reservoir shocks. Four dampers total.
• Two replacement upper control arms (FT70172BK driver and FT70173BK passenger), two FT20538 high-travel ball joints, and driver/passenger FTS70168 steering knuckles. These are ball-joint arms.
• The FTS26052 pair contains driver FTS820312D and passenger FTS820312P 4-inch coilovers, two FT83369BK reservoir mounts and FT86061 hardware.
• Rear lift uses two FTBK12 1-inch blocks and four FT1500U U-bolts with the factory rear leaf springs. FT70195 hardware subassembly includes two FT70196 body-mount weld gussets, differential spacers, bump-stop spacers, brake-hose mounts and arm hardware. No add-a-leaves or front shock spacers are selected.

Installation and requirements

• Installation requires two professional mechanics and a certified welder. The body mounts must be cut and the specified gussets welded in; tie-rod ends and front bump-stop threads require trimming.
• The factory skid plate and front mud flaps are removed. Brake hoses and wheel-speed sensor wiring require relocation and full-travel/steering clearance checks.
• Check alignment before installation, align to factory specifications afterward and recheck fasteners after 50 miles.
• The front lower-control-arm shock-mount gusset requires clearance grinding. With these Dirt Logic coilovers, skip the factory front shock-spacer steps and follow FT820312 for the selected FTS26052 coilovers and reservoir mounting.
• Install the selected FTS810982 rear shocks with their own FT810982 hardware/bushing instructions. Factory rear leaf springs are retained.

Tire and wheel guidance

• Factory wheels/tires and 17-inch wheels cannot be used. Manufacturer guidance: 35/12.50R18 or 295/70R18 on 18×9 wheels with 4-1/2-inch backspacing, or 35/12.50R20 on 20×9 wheels with 5-inch backspacing. Minor trimming is required.

Manufacturer part number: K7044DL. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.