Fabtech K7086 3-Inch Tundra 4WD Uniball Lift Kit - Performance Rear Shocks

Fabtech K7086 is a three-inch uniball upper-control-arm suspension package for a Tundra with factory rear coil springs. It retains the factory front coilovers with spacers and supplies two new rear shocks.

Application

• 2022–2024 Toyota Tundra SR5 or Limited 4WD CrewMax, non-hybrid, equipped with factory rear coil springs.
• Does not fit hybrid, AVS adaptive shocks, TRD Pro, Capstone, Double Cab, RWD or aftermarket lift/lowering systems. Other trims and unlisted years are outside this listing.

Package contents

• One FTS26105 uniball upper-control-arm kit: driver/passenger arm pair, two adapter pins, upper/lower misalignments, bushings, sleeves, bearing caps and hardware.
• One FTS26106 spacer kit: two FT70304 front strut spacers retaining the complete factory front coilovers, two FT70309 rear coil spacers retaining the factory rear coil springs, bump-stop/brake-line components and hardware.
• Two individually supplied FTS7188 Performance twin-tube rear shocks. Two new dampers, REAR ONLY; replacement front coilovers are not included.

Installation and requirements

• Professional installation requires the exact FTS26105 arm instructions and FT26106 spacer-system instructions.
• Installation requires trimming the factory front strut studs, drilling the rear coil-spring perches, cutting the rear bump-stop brackets and relocating brake lines.
• For 35-inch tires, the instructions require body-mount cutting and welding of the supplied plates. This is additional to normal suspension installation.
• Install the selected rear shocks using FT26106 Step 29 with the specified FT83239 spacers and supplied sleeves. For FTS7188 Performance shocks, replace the lower bushing with the supplied FT83267 as directed.
• Align to factory specifications, readjust headlights, check brake/ABS and tire clearance, and retorque after 50 miles and periodically thereafter.

Tire and wheel guidance

• 33/12.50R18 on 18x9 wheels or 33/12.50R20 on 20x9 wheels, each with 5-inch backspacing and minor trimming.
• 35/12.50R18 on 18x9 wheels or 35/12.50R20 on 20x9 wheels, each with 5-inch backspacing, requires cutting and body-mount cutting/welding as directed.
• Confirm full steering and suspension clearance; tire and wheel guidance is not a guarantee for every combination.

Vehicle photographs are illustrative demonstrations. Wheels, tires and accessories shown are not included.

Manufacturer part number: K7086. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.