Fabtech K7086DL 3-Inch Tundra 4WD Uniball Lift Kit - Dirt Logic Rear Shocks

Fabtech K7086DL is a three-inch uniball upper-control-arm suspension package for a Tundra with factory rear coil springs. It retains the factory front coilovers with spacers and supplies two new rear shocks.

Application

• 2022–2024 Toyota Tundra SR5 or Limited 4WD CrewMax, non-hybrid, equipped with factory rear coil springs.
• Does not fit hybrid, AVS adaptive shocks, TRD Pro, Capstone, Double Cab, RWD or aftermarket lift/lowering systems. Other trims and unlisted years are outside this listing.

Package contents

• One FTS26105 uniball upper-control-arm kit: driver/passenger arm pair, two adapter pins, upper/lower misalignments, bushings, sleeves, bearing caps and hardware.
• One FTS26106 spacer kit: two FT70304 front strut spacers retaining the complete factory front coilovers, two FT70309 rear coil spacers retaining the factory rear coil springs, bump-stop/brake-line components and hardware.
• Two individually supplied FTS81164 non-reservoir Dirt Logic 2.25 rear shocks. Two new dampers, REAR ONLY; replacement front coilovers are not included.

Installation and requirements

• Professional installation requires the exact FTS26105 arm instructions and FT26106 spacer-system instructions.
• Installation requires trimming the factory front strut studs, drilling the rear coil-spring perches, cutting the rear bump-stop brackets and relocating brake lines.
• For 35-inch tires, the instructions require body-mount cutting and welding of the supplied plates. This is additional to normal suspension installation.
• Install the selected rear shocks using FT26106 Step 29 with the specified FT83239 spacers and supplied sleeves. Use the exact FT81164 instructions and supplied hardware; the Performance-shock-only replacement-bushing step is not applied to Dirt Logic.
• Align to factory specifications, readjust headlights, check brake/ABS and tire clearance, and retorque after 50 miles and periodically thereafter.

Tire and wheel guidance

• 33/12.50R18 on 18x9 wheels or 33/12.50R20 on 20x9 wheels, each with 5-inch backspacing and minor trimming.
• 35/12.50R18 on 18x9 wheels or 35/12.50R20 on 20x9 wheels, each with 5-inch backspacing, requires cutting and body-mount cutting/welding as directed.
• Confirm full steering and suspension clearance; tire and wheel guidance is not a guarantee for every combination.

Vehicle photographs are illustrative demonstrations. Wheels, tires and accessories shown are not included.

Manufacturer part number: K7086DL. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.