Fabtech K7089 3-Inch Tundra 4WD Uniball Lift Kit - Factory Rear Air, Performance Shocks

Fabtech K7089 is a three-inch uniball upper-control-arm suspension package for a Tundra with factory rear air springs. It retains the factory front coilovers with spacers and supplies two new rear shocks.

Application

• 2022 Toyota Tundra SR5 or Limited 4WD CrewMax, non-hybrid, equipped with factory load-leveling rear air springs (option NF).
• Does not fit hybrid, AVS adaptive shocks, TRD Pro, Capstone, Double Cab, RWD or aftermarket lift/lowering systems. Other trims and unlisted years are outside this listing.
• Confirm the factory NF rear-air option, non-hybrid powertrain and absence of AVS against the Toyota build sheet or dealer VIN record before ordering. This package is not for a rear-coil-spring truck or aftermarket air-assist bags.

Toyota 2022 factory-option reference.

Package contents

• One FTS26105 uniball upper-control-arm kit: driver/passenger arm pair, two adapter pins, upper/lower misalignments, bushings, sleeves, bearing caps and hardware.
• One FTS26107 spacer kit: two FT70304 front strut spacers retaining the complete factory front coilovers; driver FT70311 and passenger FT70315 rear AIR spacers retaining the factory air springs, air-height-sensor brackets, bump-stop/brake-line components and hardware.
• Two individually supplied FTS7188 Performance twin-tube rear shocks. Two new dampers, REAR ONLY; replacement front coilovers are not included.

Installation and requirements

• Professional installation requires the exact FTS26105 arm instructions and FT26107 air-suspension instructions.
• Installation requires front strut-stud trimming, factory rear air-spring mounting-stud cutting/drilling, air-height-sensor relocation, rear bump-stop bracket cutting and brake-line relocation.
• For 35-inch tires, the instructions require body-mount cutting and welding of the supplied plates. This is additional to normal suspension installation.
• Install the selected rear shocks using FT26107 Step 37 with the specified FT83239 spacers and supplied sleeves. For FTS7188 Performance shocks, replace the lower bushing with the supplied FT83267 as directed.
• Align to factory specifications, readjust headlights, check brake/ABS and tire clearance, and retorque after 50 miles and periodically thereafter.

Tire and wheel guidance

• 33/12.50R18 on 18x9 wheels or 33/12.50R20 on 20x9 wheels, each with 5-inch backspacing and minor trimming.
• 35/12.50R18 on 18x9 wheels or 35/12.50R20 on 20x9 wheels, each with 5-inch backspacing, requires cutting and body-mount cutting/welding as directed.
• Confirm full steering and suspension clearance; tire and wheel guidance is not a guarantee for every combination.

Vehicle photographs are illustrative demonstrations. Wheels, tires and accessories shown are not included.

Manufacturer part number: K7089. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.