Fabtech K7089M 3-Inch Tundra 4WD Uniball Lift Kit - Factory Rear Air, Stealth Rear Shocks

Fabtech K7089M is a three-inch uniball suspension package for a Tundra with factory rear air springs. It retains the factory front coilovers with spacers and supplies two new rear shocks.

Application

• 2022 Toyota Tundra SR5 or Limited 4WD CrewMax, non-hybrid, with factory NF load-leveling rear air springs and without AVS adaptive shocks.
• Does not fit hybrid, TRD Pro, Capstone, Double Cab, RWD, rear coil springs, aftermarket air-assist bags or aftermarket lift/lowering systems. Other trims and unlisted years are outside this listing.
• Confirm the NF rear-air option, non-hybrid powertrain and absence of AVS using the Toyota build sheet or dealer VIN record before ordering.

Toyota 2022 factory-option reference.

Package contents

• One FTS26105 uniball upper-control-arm kit: driver/passenger arm pair with adapter pins, misalignments, bushings, sleeves, bearing caps and hardware.
• One FTS26107 spacer kit: two FT70304 front strut spacers retaining the factory front coilovers; driver FT70311 and passenger FT70315 rear air spacers retaining the factory air springs, height-sensor brackets, bump-stop/brake-line components and hardware.
• Two individually supplied FTS6188 Stealth monotube rear shocks.
• Two new dampers, rear only. Replacement front coilovers are not included.

Installation and requirements

• Professional installation requires the exact FTS26105 arm instructions and FT26107 air-spacer instructions.
• Installation requires trimming the factory front strut studs, cutting/drilling the rear air-spring mounting studs, relocating height sensors, cutting rear bump-stop brackets and relocating brake lines.
• For 35-inch tires, body-mount cutting and welding of the supplied plates are required.
• Install the selected rear shocks using FT26107 Step 37 with the specified FT83239 spacers and supplied sleeves. The Performance7188-only FT83267 lower-bushing replacement is not applied to these selected shocks.
• Align to factory specifications, readjust headlights, check brake/ABS and tire clearance, and retorque after 50 miles and periodically thereafter.

Tire and wheel guidance

• 33/12.50R18 on 18x9 wheels or 33/12.50R20 on 20x9 wheels, each with 5-inch backspacing and minor trimming.
• 35/12.50R18 on 18x9 wheels or 35/12.50R20 on 20x9 wheels, each with 5-inch backspacing, requires cutting and body-mount cutting/welding as directed.
• Confirm clearance through full steering and suspension travel; tire/wheel guidance is not a guarantee for every combination.

Vehicle photographs are illustrative demonstrations. Wheels, tires and accessories shown are not included.

Manufacturer part number: K7089M. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.