Fabtech K7107M 3-Inch Ball Joint UCA Lift Kit with Rear Stealth Shocks — 2022–2024 Tundra 4WD, Rear Coils

Fabtech K7107M combines ball-joint upper control arms, front strut and rear coil-spring spacers, differential-drop brackets and two rear Stealth monotube shocks. Factory front coilovers and rear coil springs are retained.

Application

• 2022–2024 Toyota Tundra SR, SR5, Limited, Platinum or 1794 Edition; non-hybrid, 4WD, CrewMax, with actual factory rear COIL springs and without Adaptive Variable Suspension (AVS). Confirm the powertrain, cab, rear spring type and installed equipment before ordering.
• Does not fit TRD Pro, Capstone, hybrid/i-FORCE MAX, AVS, factory rear air suspension, Double Cab, RWD or vehicles already fitted with an aftermarket lift or lowering system. Other years and trims are outside this listing.
• Nominal 3-inch suspension system. One complete K7107M system is supplied.

Package contents

• One FTS26133 ball-joint upper control-arm kit: driver and passenger arm pair, eight bushing halves, four sleeves, eight pivot washers, two ball-joint washers, bearing caps, ABS-line clamps and specified assembly hardware.
• One FTS26106 spacer kit: two front strut spacers, two rear coil spacers, driver/passenger rear bumpstop brackets, front bumpstop spacers, brake-line brackets, body-mount weld plates and specified hardware.
• One FTS26132 front differential-drop kit: driver and passenger brackets, four bushings, two sleeves, backing spacer plate and specified mounting hardware.
• Two FTS6188 rear Stealth monotube shocks: TWO new dampers total, both rear. Replacement front coilovers and replacement springs are not included.

Installation and requirements

• Professional installation required. Read the exact FTS26133, spacer-kit and FTS26132 differential-drop instructions before work; inspect the stock suspension and record factory alignment.
• Retain the factory front coilovers with the supplied spacers. The front strut studs must be trimmed to the specified 3/4-inch retained length; follow the spacer instructions and their mounting sequence.
• Install the ball-joint arms with barrel gussets upward and the specified bushings, sleeves, washers, caps and ABS-line clamps. Follow the arm guide for air-box/computer-module removal and reinstallation.
• Support and reposition the front differential using the supplied driver/passenger brackets, bushings, sleeves and backing plate; relocate the differential sensor-wire bracket as instructed.
• The rear coil branch requires two 7/16-inch holes drilled in each upper rear coil mount using the supplied template. Retain and reinstall the factory coil springs and isolators.
• Cut the rear bumpstop brackets and install the supplied extensions and brake-line brackets. Fit both rear Stealth shocks using the specified lower-mount spacers and sleeves.
• For 35-inch tires, the instructions additionally require body-mount cutting and welding the supplied reinforcement plates. Other wheel/tire combinations may require trimming; check actual clearance.
• Check brake hoses, ABS wiring, tire and suspension clearances through steering and suspension travel. Align to factory specifications, adjust headlights, and recheck fasteners after 50 miles and periodically.

Tire and wheel guidance

• Manufacturer guidance: 295/60R20 tires on 20×9 wheels with 5-inch backspacing, with minor trimming. Verify the actual vehicle clearance. Wheels and tires are sold separately.

Manufacturer part number: K7107M. Manufacturer product details.

California Proposition 65: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.