2" Lift Kit - Ford Super Duty F250/F-350 Excursion 4WD 1999-2004

2" Lift Kit - Ford Super Duty F250/F-350 Excursion 4WD 1999-2004

$629.95
Skip to product information
2" Lift Kit - Ford Super Duty F250/F-350 Excursion 4WD 1999-2004

ReadyLift Off Road

2" Lift Kit - Ford Super Duty F250/F-350 Excursion 4WD 1999-2004

$629.95

Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.

ReadyLIFT offers an expanded line of leveling products made to fit the Ford Super Duty trucks. Due to popular demand we developed a SST Lift Kit for the 1999-2004 Ford F250 Super Duty 4WD trucks and 2000-2005 Ford Excursion 4WD. (Note: for use on 1999 model F250 trucks built after 3/1/1999 - not for use on trucks built before 3/1/99). These front leaf spring trucks require an innovative approach to leveling-lifting. ReadyLIFT is proud to offer a new SST Lift Kit system that will compliment the leaf spring suspension. This system includes a "mini leaf pack" that, once installed under the factory leaf spring pack, raises the front of the F250 4WD Super Duty trucks a total of 2.0" which is what is required to obtain a level stance. To lift the rear, our time-tested OEM-style 4.0" cast iron rear blocks with built-in pinion angle correction and bump stop landings replace the factory 2.0" block for additional lift of 2.0". This kit also includes a carrier bearing spacer which is intended for use on trucks with a two-piece drive shaft. This set up establishes a mild lift with a slight rake maintained for towing or hauling. The kit comes with new longer front and rear U-bolts and hardware as well as important pan-hard bar alignment bushings. This kit will allow for up to 35" tall tires. If you are looking for a leveling kit for your (post 3/1/99) '99-04 F250 then look no further. This is the kit you've been searching for. Fits trucks fit with either the gas or diesel engine applications. NOTE: For trucks with a two-piece drive shaft. NOTE: The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs. Use of this type of air bag system will void all block warranties and can cause failure of the block bump stop tang.

  • Max lift of 2.0" in the front and 2.0" in the rear
  • Compatible with trucks with twopiece drive shafts
  • Can accommodate tires up to 35" in diameter
  • Features a mini leaf pack design that inserts under the front leaf springs
  • Compatible with trucks with two Compatible with trucks with twopiece drive shafts

Specifications

  • California Proposition 65: WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
  • Fitment: Direct Fitment
  • Front Lift Component: Leaf Spring
  • Front Lift Height: 2 Inches
  • Front or Rear: Front and Rear
  • Install Difficulty: Difficult Requires Professional Installation
  • Installation Time: 5+ Hours
  • Max Tire Size: 35 Inch
  • Prop65 Chem1: Di(2-ethylhexyl)phthalate (DEHP)
  • Rear Lift Component: Block
  • Rear Lift Height: 2 Inches
  • Shocks Included: No

Vehicle application overview

Confirm trim, engine, and installation requirements before ordering.

  • 1999–2004 Ford F-250 Super Duty
  • 1999–2004 Ford F-350 Super Duty
  • 2000–2004 Ford Excursion
  • 2003–2004 Ford Excursion
  • 2003–2004 Ford F-350 Super Duty
  • 2004 Ford Excursion
  • 2004 Ford F-250 Super Duty
  • 2004 Ford F-350 Super Duty

Your vehicle

Select a vehicle to check the supplied application records for this part.

Choose or change vehicle →

Product reference & ordering help

Manufacturer & part identification

ReadyLift Off Road

Use the SKU for your selected option when contacting us.
OptionSKU / part reference
Standard69-2085
Vehicle compatibility

Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.

Request fitment help →
Installation & specifications

Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.

Shipping expectations

Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.

Shipping & delivery information
Manufacturer warranty

Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.

Warranty information