Dinan
Dinan Negative Camber Control Arms - 2011-2019 BMW 528i/535i/550i/640i/650i Dinan Negative Camber Control Arms - 2009-2016 BMW 740i/750Li/760Li
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition, the static negative camber or the amount you will see on your alignment readout is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.
A quick look at your front tires will tell the story. If you are noticing significant outside edge front tire wear perhaps even a bit of ''cupping'' you are definitely a candidate for the Negative Camber Control Arms. Not only will the extra camber improve the handling but you'll also likely notice more even tire wear assuming you continue to corner aggressively.
- Replaces front upper control arms with ones that increase negative camber by -0.5 degrees
- Improves grip of front tires
- Evens out tire wear during aggressive cornering
Specifications
- Brand: Dinan
- Category: Suspension
- Dinan Point Value: 1
- Emission Code: 5
- Height: 5
- Labor Time (Hours): 2.4
- Length: 14
- part type: Alignment Caster / Camber Control Arm
- Product Type: Control Arms
- Sub Category: Alignment
- Warning: California Proposition 65
- Weight: 7
- Width: 14
Vehicle application overview
Confirm trim, engine, and installation requirements before ordering.
- 2009–2015 BMW 750Li
- 2009–2015 BMW 750i
- 2010–2015 BMW 550i GT
- 2010–2015 BMW 750Li xDrive
- 2010–2015 BMW 750i xDrive
- 2010–2015 BMW 760Li
- 2010–2017 BMW 535i GT
- 2010–2017 BMW 550i GT xDrive
- 2011–2015 BMW Alpina B7
- 2011–2015 BMW Alpina B7 xDrive
- 2011–2015 BMW Alpina B7L
- 2011–2015 BMW Alpina B7L xDrive
- 2011–2016 BMW 535i
- 2011–2016 BMW 535i xDrive
- 2011–2016 BMW 550i
- 2011–2016 BMW 550i xDrive
- 2011–2017 BMW 535i GT xDrive
- 2012–2016 BMW 528i
- 2012–2016 BMW 528i xDrive
- 2012–2018 BMW 640i
- 2012–2018 BMW 650i
- 2012–2018 BMW 650i xDrive
- 2013–2015 BMW 740Li
- 2013–2015 BMW 740i
- 2013–2019 BMW 640i Gran Coupe
- 2013–2019 BMW 650i Gran Coupe
- 2013–2019 BMW 650i xDrive Gran Coupe
- 2014–2018 BMW 640i xDrive
- 2014–2019 BMW 640i xDrive Gran Coupe
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Manufacturer & part identification
Dinan
| Option | SKU / part reference |
|---|---|
| Standard | D160-0006 |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information