The Load Distribution Plate, LDP is a rigging plate designed for distribution of multiple loads and directions. Self-aligning shackle pin holes fit common ? shackles. Pear shaped holes permit ? and 7/8 shackle bodies to pass through.

Factor 55 00470-06 Load Distribution Plate (LDP) — Gray

$125.00
Skip to product information
The Load Distribution Plate, LDP is a rigging plate designed for distribution of multiple loads and directions. Self-aligning shackle pin holes fit common ? shackles. Pear shaped holes permit ? and 7/8 shackle bodies to pass through.
  • The Load Distribution Plate, LDP is a rigging plate designed for distribution of multiple loads and directions. Self-aligning shackle pin holes fit common ? shackles. Pear shaped holes permit ? and 7/8 shackle bodies to pass through.
  • The Load Distribution Plate, LDP is a rigging plate designed for distribution of multiple loads and directions. Self-aligning shackle pin holes fit common ? shackles. Pear shaped holes permit ? and 7/8 shackle bodies to pass through.
Factor 55 00470-06 Load Distribution Plate (LDP) — Gray

Factor 55

Factor 55 00470-06 Load Distribution Plate (LDP) — Gray

$125.00

Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.

Eligible returns within 30 days of receipt. Items must be unused, with tags and original packaging. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.

One Gray Factor 55 Load Distribution Plate for collecting and distributing multiple recovery rigging connections. The symmetric plate provides separate connection openings for appropriate winching or bridle arrangements.

  • Manufacturer-rated working load limit: 20,000 lb for the plate. Do not treat this as a separate 20,000 lb allowance for every opening.
  • Self-aligning pin openings fit common 3/4-inch shackles; pear-shaped openings allow common 3/4-inch and 7/8-inch shackle bodies to pass through. Confirm actual dimensions.
  • Laser-engraved angle scales assist sling multiplier estimates. Rigging angles change forces in each leg and connected component.
  • Machined 6000-series aluminum with a Gray hard anodized finish.
  • Large radiused openings accommodate appropriately sized and rated soft-shackle connections.

Includes one plate only; shackles, ropes, straps and other recovery equipment are separate. Use requires suitable rigging knowledge and a configuration within the manufacturer's instructions and all component ratings. Inspect the plate and connections before use. No specific vehicle year or trim fitment is verified.

California Proposition 65: WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

Your vehicle

Select a vehicle to check the supplied application records for this part.

Choose or change vehicle →

Product reference & ordering help

Manufacturer & part identification

Factor 55

Use the SKU for your selected option when contacting us.
OptionSKU / part reference
Standard00470-06
Vehicle compatibility

Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.

Request fitment help →
Installation & specifications

Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.

Shipping expectations

Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.

Shipping & delivery information
Manufacturer warranty

Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.

Warranty information