Printed Series 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)

StickerFab

Printed Series 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)

$25.99

Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.

Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.

Product information from StickerFab

Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.

Bigfoot / Sasquatch design — custom printed overlay with tint built right in
Fits 2021+ Ford Bronco LED taillights — precision-cut for a factory-flush look
Printed and laminated in the USA — 2.5mil overlaminate protects against UV, water, and daily wear
Smokes and styles in one step — no separate tint film needed, the design IS the tint
Wet-apply vinyl — repositionable during install, permanent once set
Two smoke options — Dark Smoke or Light Smoke to match your build
Removable — won't damage your taillights when removed correctly

Printed Series 1L Tail Light Overlays

Bigfoot lives on your taillights now. Smoked, printed, and ready to turn heads on the trail.

Printed Bigfoot Tail Light Overlay installed on 2021+ Ford Bronco

More Than a Tint — It's a Statement

Standard tint overlays smoke your taillights and call it a day. The Printed Series goes further. Your chosen design is printed directly into the overlay film, so you get custom art and the smoked look at the same time — no layering, no gaps, no bubbles between films.

Our first design is Bigfoot / Sasquatch — a classic Pacific Northwest icon that fits perfectly on a Bronco. The full panel is covered, and the design blends with the taillight's natural translucency when lit at night.

Bronco LED taillight glowing at night with overlay applied

Pick Your Smoke Level

Dark Smoke — aggressive smoked look. The Bigfoot silhouette shows strongly during the day, taillights appear dramatically darker at rest.

Light Smoke — subtler tint. The design blends more naturally in daylight while still delivering the effect when the lights are on at night.

Both options use the same 2.5mil laminate top coat — weather-resistant and UV-stable for long-term outdoor use.

Printed overlay on 2021+ Bronco taillight — daytime look

⚙️ Installation — Takes About 20–30 Minutes

Wet install method. Clean the taillight thoroughly, wet both surfaces with soapy water, position and squeegee. A felt-tip squeegee is recommended. Install in shade — direct sun heats the vinyl and makes repositioning harder. Allow 24 hours cure before washing. Removal: Apply Goo Gone, let it sit for a minute, then peel from a corner. Wipe the taillight clean with a fresh cloth. No damage to the OEM taillight surface.

FAQ

Does each kit cover both taillights? Yes — every order includes overlays for the driver side and passenger side.	Do these work with the stock LED taillights? Yes — specifically designed for the 2021+ Bronco LED taillight signature. Not for halogen taillights.
Will the design show when the lights are off? Yes — in Dark Smoke especially, the Bigfoot silhouette is visible during the day. Light Smoke is more subtle at rest.	Is this street legal? Tint laws vary by state. We recommend the Light Smoke option for maximum brightness retention and broad compliance.
Can I request a different design? Yes — contact us with your idea. Designs with mass appeal get listed for everyone.	How do I remove it? Apply Goo Gone, let it sit a minute, then peel from a corner. Wipe clean. No damage to the OEM lens.

Your vehicle

Select a vehicle to check the supplied application records for this part.

Choose or change vehicle →

Product reference & ordering help

Manufacturer & part identification

StickerFab

Use the SKU for your selected option when contacting us.
Option	SKU / part reference
Bigfoot / Sasquatch / Dark Smoke	21BRNCLEDPTTL-DSCL
Bigfoot / Sasquatch / Light Smoke	21BRNCLEDPTTL-LSCL

Vehicle compatibility

Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.

Request fitment help →

Installation & specifications

Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.

Shipping expectations

Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.

Shipping & delivery information

Manufacturer warranty

Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.

Warranty information