Printed Series Auxiliary Switch Labels (Upfitter) - 2018+ Jeep Wrangler / Gladiator JL / JT

Product information from StickerFab

Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.

• Easy to apply
• Fits OEM upfitter switches

Printed Series Auxiliary Switch Labels (Upfitter) - 2018+ Wrangler / Gladiator

The convenience of the auxiliary switches in the 2018+ Wrangler JL / Gladiator JT vehicles is relatively unquestioned.  They are labeled Aux 1-4, but unless you have memorized each location, you might forget a switch or two.  Asking someone else to turn something else on for you?  Well forget about it unless you start labeling.

Lamination makes the sticker stiffer (easier to apply) and more resistance against wear. NOTE:  In order to get the label backlit, you would need to sand down the black paint.

INSTALLATION

Clean the application area to prepare it for installation.  We'll be doing a dry installation.  

NOTES:  We recommend that the installation area be free of wax and not under direct sunlight.  Some will choose to clean the application area with rubbing alcohol which is okay.

"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."

• Microfiber
• Detailing Spray
• Heat Gun or Hair Dryer

Keep a hair dryer around if you want to apply light heat to dry it out once properly aligned. 

Fitment:

• Jeep 2018+ Wrangler JL
• Jeep 2020+ Gladiator JT