Topo Front Door Net Trim Overlay Kit (Printed Series) - 2021+ Bronco

Designs

• Generic Topo - a nice topological map style design
• Badlands - actual location in Badlands National Park based on USGS maps
• Bronco Knoll - the area including the coordinates marked on every Bronco.  34.5261 N, 116.75685 W.

Customization

While StickerFab caters to a large number of people, it is still possible to customize some orders.  Ideas that have broad appeal are the best!  However, if you have some art work, we may be able to do a special print just for you.

• Military Themed
• Patriotic
• Other organizations

Please refrain from submitting trademarked content unless you have the rights to it.  We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.

Use ourcontact formto get in touch with us.

INSTALLATION

Use the installation video above of a similar product and written instructions to complete the install. 

NOTE:  All topo vinyls are shipped in tubes to prevent damage.  Prior to install, lay out all of these items and make sure they are flat prior to install.

You will want to do this in 75-85 degree weather ideally.  Stay in the shade unless it is a little on the cool side.

Recommended items:

• This Kit
• Detailer spray to prep the area (without wax)
• Alcohol wipe
• Optional heat gun or hair dryer
• Optional 3M primer pen (strong) / 3M promoter sponge (strongest) - note that these items dry out very fast, so you have to identify the edges and weak points beforehand and map out the area you will use them on

Make sure the surface is clean.  Prep with alcohol pad if needed. 

If you use 3M primer / promoter, apply to the edges after cleaning and before application of the vinyl.  These items dry out quickly, so you must apply to both sides, one after the other with no breaks in between (roughly < 60 seconds).

Use a dry install.  Align pieces and press down firmly.  Work slow to prevent creasing.

The adhesive reacts to PRESSURE and HEAT.  When using a heat gun or hairdryer, apply light heat and then press firmly.  You can do this cycle a few times in each area for maximum adhesion.