Version 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)

• Tail light overlays for the 2021+ Ford Bronco with LED taillights — covers the turn signal portion only
• Not compatible with halogen taillights — LED tails only
• Sold as a left and right pair
• 9 material options: plain smoked, LX+ air-egress, Stealth matte, Honeycomb, Carbon Fiber, and Galaxy
• Made to order by StickerFab in Fort Myers, FL

Version 1L Tail Light Overlays — 2021+ Ford Bronco (LED Taillights)

The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.

Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.

Material Options

1. Dark Smoke — standard dark smoke tint. Clean, classic smoked look. Made in Germany.
2. Dark Smoke LX+ — premium dark smoke with air-egress channels (helps eliminate bubbles during install). Made in the USA.
3. Light Smoke — lighter tint for a subtle tone-down without going full dark. Made in Germany.
4. Light Smoke LX+ — premium light smoke with air-egress channels. Made in the USA.
5. Dark Smoke Stealth — premium dark smoke in a matte finish with air-egress channels. Eliminates the gloss look entirely. Made in the USA.
6. Light Smoke Stealth — premium light smoke in a matte finish with air-egress channels. Made in the USA.
7. Dark Smoke Honeycomb — dark smoke with a honeycomb pattern visible when the lights are on. Air-egress channels. Made in the USA.
8. Dark Smoke Carbon Fiber — dark smoke with carbon fiber texture visible when lit. Air-egress channels. Made in the USA.
9. Dark Smoke Galaxy — dark smoke loaded with metallic flake that catches light when illuminated. Appears similar to standard dark smoke when backlit from behind. Air-egress channels. Made in the USA.

LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.

Installation

Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.

What you'll need:

• Wax-free detailer spray or glass cleaner + microfiber towel
• StickerFab Application Fluid (recommended) or soapy water (a few drops of dish soap in 1-2 cups of water)
• Felt-lined squeegee (optional but helpful)
• Heat gun or hair dryer (optional)

Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.

Fitment

Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.

FAQ

How do I know if my Bronco has LED or halogen taillights?
LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.

Will the overlay affect brake light brightness?
Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.

What's the difference between Dark Smoke and Dark Smoke Stealth?
Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.

Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off?
When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.

Are these easy to remove?
Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.