K2 Industries
VW Golf MK7 / Jetta / Passat / Beetle / EOS / CC & Audi A3 / Q3 / TT Manual Transmission Billet Aluminium Shifter Bushing Kit (10mm Pin)
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
Restore precision and tighten up the shifter feel of your VW or Audi manual transmission with this premium 2-piece solid shifter bushing kit, precision machined from 6061 billet aluminium and paired with bronze sleeve bearings for permanent durability and a dramatically improved shifting experience. Factory rubber shifter bushings on the VAG MK7 platform are notorious for deforming and degrading over time, resulting in vague gear engagement, sloppy shifter feel, missed shifts, and a generally disconnected gear change experience that frustrates manual transmission enthusiasts. This solid bushing kit replaces the compliant factory rubber bushings with rigid aluminium side plates and long-life bronze sleeve bearings, eliminating deformation and delivering the direct, precise, mechanical shifting feel that makes driving a manual VAG genuinely enjoyable.
Features:
- Better shifting feel – 6061 billet aluminium side plates paired with bronze sleeve bearings replace the deformation-prone factory rubber bushings, delivering a direct, precise, mechanical shifter feel
- Cost-effective long-term durability – bronze sleeve bearings significantly outlast factory plastic bushings, eliminating recurring shifter wear repair costs
- Anodized surface finish – aluminium side plates are anodized to prevent rust and ensure long-term corrosion resistance
- Direct factory replacement – installs into existing shifter relay lever mounting points without modification
- Easy DIY installation – designed for straightforward home mechanic installation, providing immediate shifter feel improvement at an affordable cost
- Wide platform compatibility – fits the entire VAG MK7-platform manual transmission lineup across VW and Audi models
Specifications:
- Condition: 100% Brand New
- Type: Shifter Relay Lever Bushing Kit
- Material: 6061 Billet Aluminium & Bronze Sleeve Bearings
- Surface Finish: Anodized
- Pin Hole Size: 10mm
- Quantity: 2 pieces per kit
- Position: Shifter Relay Lever Assembly
- Purpose: Performance Upgrade / Shifter Feel Restoration
Compatible Factory Part Numbers:
- Side-to-Side Linkage Selector Cable: 1J0711761B / 5N0711761 (10mm hole size)
- Plastic Relay Lever: 1K0711203H / 5K0711202B / 5K0711203B / 5N0711202G
Fitment:
Manual transmission only. Verify your factory plastic relay lever has a 10mm pin hole before ordering.
- Audi:
- Audi A3 Manual Transmission (2015 – 2016)
- Audi Q3 Manual Transmission (2016 – 2017)
- Audi TT Manual Transmission (2016 – 2017)
- Volkswagen:
- VW Beetle Manual Transmission (2012 – 2016)
- VW EOS Manual Transmission (2011 – 2016)
- VW Golf MK7 Manual Transmission (2014 – 2017)
- VW Jetta Manual Transmission (2015 – 2017)
- VW Passat Manual Transmission (2012 – 2017)
- VW CC Manual Transmission (2012 – 2017)
- Compatible with manual transmission models with 10mm relay lever pin only – not compatible with DSG / DCT, automatic, or other transmission variants
- Confirm vehicle model, transmission type, and factory relay lever pin diameter before ordering
Contents:
- 2x Solid Shifter Bushing Side Plates (6061 Billet Aluminium with Bronze Sleeve Bearings)
Benefits:
- Permanently eliminates the vague, sloppy shifter feel caused by deformed factory rubber bushings – restoring the direct mechanical engagement that makes manual VAG vehicles enjoyable to drive
- Reduces missed shifts and improves gear engagement precision, particularly noticeable during fast shifts and aggressive driving
- 6061 billet aluminium side plates deliver permanent dimensional stability – will not deform, crack, or degrade like factory rubber over time
- Bronze sleeve bearings provide significantly extended service life compared to factory plastic bushings – this is a one-time upgrade rather than a recurring service item
- Anodized finish maintains the premium aluminium appearance and corrosion resistance for the lifetime of the vehicle
- Affordable performance upgrade with immediately noticeable improvement – delivers genuine shifter feel transformation at a fraction of the cost of full short shifter kits
- Pairs naturally with weighted shift knobs and short shifter kits for a complete shifter refresh package
- Wide cross-platform compatibility makes this a versatile upgrade for VAG enthusiasts who manage multiple manual VAG vehicles
Installation Notes:
- Fitment verification required: Confirm your factory plastic relay lever has a 10mm pin hole before ordering – kits with different pin diameters will not fit. Reference part numbers 1K0711203H, 5K0711202B, 5K0711203B, or 5N0711202G to verify compatibility
- Locate the shifter relay lever assembly under the center console or transmission tunnel area – consult vehicle service documentation for exact location on your specific model
- Carefully disconnect the factory shifter cables and remove the existing rubber bushings from the relay lever
- Apply a small amount of synthetic grease to the bronze sleeve bearings during installation for smooth long-term operation
- Ensure the new aluminium side plates are oriented correctly during installation – improper orientation will result in incorrect shifter geometry
- Test full shifter operation through all gear positions before reassembling the center console – verify smooth, precise engagement in all gears
- Professional installation recommended if you are unfamiliar with shifter relay assembly service procedures
- If unsure about compatibility with your specific VW or Audi variant, contact our team with your year, model, and factory plastic relay lever part number before ordering
Warranty:
- 12-month standard warranty from date of purchase
- Contact our support team for assistance with any issues
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | 1005009584171527 |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information