K2 Industries
2.50" to 2.75" Silicone Reducer Hose 45 Degree 3-Ply Black
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
2.50" to 2.75" Silicone Reducer Hose 45 Degree 3-Ply Black
Step down from 2.50" to 2.75" diameter with a 45-degree angled bend. Three-ply silicone construction handles coolant, fuel, and vacuum lines without cracking or degrading. Black finish resists UV and engine bay heat.
Key Features
- 45-degree angle - Fits tight engine bays and tight routing around headers and intake manifolds
- Reinforced 3-ply construction - Resists collapse under vacuum and pressure cycles
- Black silicone - Won't degrade from oil residue, coolant splash, or continuous underhood heat
Specs
- Material: Silicone
- Configuration: 45-degree reducer hose
- Diameter range: 2.50" to 2.75"
- Construction: 3-ply reinforced
- Color: Black
Whats Included
- One 45-degree silicone reducer hose
Frequently Asked Questions
What size hose clamps do I need?
You'll need two clamps — one sized for the 2.50" end and one for the 2.75" end. Standard worm-drive or T-bolt clamps work fine. Measure your existing hose diameter to match the clamp size, or bring the reducer to your local parts store for sizing.
Can this handle fuel line pressure?
Silicone hose works for low-pressure fuel lines and return lines. If you're running a high-pressure mechanical or electric fuel pump system, confirm that your pump's PSI falls within silicone's safe operating range — some fuel pumps run hotter and faster than silicone can handle long-term.
Do I need to do anything to prep the hose before installing it?
Straight out of the box it's ready to mount. If you're installing over barbed fittings, you can dip the hose ends in warm water for 30 seconds to soften the silicone — makes sliding onto fittings easier. No sanding, cleaning, or priming needed.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1445-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information