K2 Industries
4 Inch Blue Silicone Hose - 3-Ply 12 Inch Length
Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.
Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.
Product information from K2 Industries
Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.
4 Inch Blue Silicone Hose – 3-Ply 12 Inch Length
3-ply reinforced silicone hose built for boost, coolant, and vacuum lines that demand flexibility without failure. The blue color aids quick identification in tight engine bays. Constructed with embedded fabric layers to resist kinking and maintain consistent flow under pressure.
Key Features
- 4 Inch Diameter - Handles high-volume coolant and boost applications without restriction.
- Embedded Fabric Layers - Resists collapse under vacuum or pressure cycling; won't crimp in tight spaces.
- Blue Silicone Material - Maintains flexibility across a wide temperature range and resists oil and coolant degradation.
Specs
- Material: Silicone
- Construction: 3-Ply with reinforcement
- Diameter: 4 Inch
- Length: 12 Inch
- Color: Blue
Whats Included
- 4 Inch Blue Silicone Hose (1 piece, 12 Inch length)
Frequently Asked Questions
Will this hose need clamps, and what size should I use?
Yes, you'll need hose clamps to secure both ends. Since this is a 4-inch diameter hose, use T-bolt or worm-drive clamps rated for that size. The exact clamp size depends on the ID of your barbed fitting or adapter.
Can I use this on a turbo intake or only for coolant?
This hose is rated for boost, coolant, and vacuum applications. If you're running it on a turbo intake, confirm your boost level stays within the hose's pressure rating—silicone typically handles 15–20 psi reliably, but check the specs for your specific turbo setup.
Do I need to do anything to prep the hose before installation?
Inspect the interior and exterior for defects before cutting or fitting. If you're trimming the length, use a sharp utility knife or hose cutter to avoid fraying the edges. Soak the hose ends briefly in warm water if they're tight over fittings—silicone softens slightly when warmed.
Your vehicle
Select a vehicle to check the supplied application records for this part.
Choose or change vehicle →Product reference & ordering help
Supplier & part identification
K2 Industries
| Option | SKU / part reference |
|---|---|
| Standard | K2-1513-UNV-006-TSARK |
Vehicle compatibility
Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.
Request fitment help →Installation & specifications
Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.
Shipping expectations
Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.
Shipping & delivery informationManufacturer warranty
Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.
Warranty information