2019+ Silverado/Sierra 1500 Chase Kit Upper Control Arm Baja Kits

2019+ Silverado/Sierra 1500 Chase Kit Upper Control Arm Baja Kits

$899.00
Skip to product information
2019+ Silverado/Sierra 1500 Chase Kit Upper Control Arm Baja Kits

Baja Kits

2019+ Silverado/Sierra 1500 Chase Kit Upper Control Arm Baja Kits

$899.00

Check fitment before ordering
Match the year, make, model, trim and engine in the product details. Review mounting requirements and vehicle modifications. Ask us about this part.

Interested in this option? Ask Lee Mods to check availability before you order.

Request an availability update

Opens your email app with this product and part reference. This is a manual inquiry, not an automatic stock alert or a reservation.

Eligible returns within 30 days of receipt. Items must be unused, with original packaging and all included parts. Contact Lee Mods before sending anything back. Lee Mods pays return shipping for eligible U.S. returns; no restocking fee. See Returns & Exchanges for full conditions.

Product information from Baja Kits

Manufacturer warranty and guarantee statements below are subject to that manufacturer’s terms. For return eligibility through Lee Mods, see Returns & Exchanges. Ask Lee Mods to clarify any warranty or guarantee before ordering.

Currently unavailable for purchase. This catalog listing is for product reference. No orders or preorders are being accepted.

Our computer designed upper a-arm uses a fabricated, boxed arm design for ultimate strength. It allows significantly more wheel travel over stock when paired with an extended length, bolt in, aftermarket shock and we've built more caster into all of our Upper arms to give your truck the on road stabilty needed anytime a truck is lifted from its factory ride height.

We use Trophy Truck grade uniballs to replace the weak, stock ball joints, giving you maximum articulation and performance in the dirt with your 2WD or 4WD Silverado.

These will also work great with your existing lift kit that most likely has maxed out the stock ball joint angle. (Rear kits available too).

The Baja Kits Advantage:

  • CAD designed boxed UCA
  • Our custom Hi-Density Custom Bushings with grease fittings offer industry leading durabilty and a quiet, no squeak ride
  • 1 Inch Hi angle Trophy Truck grade uniball's replace the weak stock ball joints that fail under high angles and loads seen from normal offroad use
  • Our CNC machined corrosion resistant misaligns have a tapered snout to adapt your stock upright/spindle with ease
  • We've increased the caster angle that you lose when lifting a truck with stock arms to regain on road stability, handling and alignment

Technical Specs:

  • Track Width - Stock width
  • Lift - 0-3 Inch

Product Requirements:

  • Shocks - Aftermarket Replacement 2.5 & 3.0 Shocks
  • Tire Size - 33 Inch are recommended for most with slight trimming.
  • 35 Inch Tires have become popular be but warned, Significant trimming is needed
  • Wheel Size - 17 Inch rim with 4.75 Inch max backspacing

Parts Included:
Kits come pre assembled and ready for install

  • Boxed Upper Arms
  • Baja Kits Badges & Rivets
  • Hi-Density Custom Bushings
  • Crush Sleeves
  • Zerk fittings
  • 1 Inch uniballs
  • Countersunk Top Misaligns & 12 point bolts
  • Heat Treated Tapered Misalign Adapters

Additional Items

  • Install Guide
  • Baja Kits Sticker pack

Install Information:

  • Level 1 Installation, Bolt on
  • Install Time: 2 hours (Times will vary depending on knowledge and skill level)
  • Images May Differ from the Actual Product

Up to 9 Inch of wheel travel with Baja Kits custom King Shocks; 0-3 Inch of lift - Max Backspacing 4.75 Inch

Stamped Steel, Aluminum, and Forged Steel Control Arms
For the2019-Up Chevy Silverado and GMC Sierra 1500 trucks, GM offered three different upper control arms: stamped steel, aluminum, and forged steel.

Additionally, in 2014-2016 GM truck had two different knuckles-aluminum and steel-each with different ball joint hole sizes.

Stamped steel and aluminum arms have a larger ball joint that fit the same knuckle. Steel knuckles with forged steel control arms had smaller ball joint holes that match the cast steel arms only.

This is the same setup found on 2007-2014 models. Forged steel and forged aluminum arms have retention clips on the ball joint so if the ball joint cup becomes distorted, it does not fail.

New Stamped Steel Arm Design
The New stamped steel arms have a ball joint that is sandwiched between the upper and lower pieces of the arm with a relatively small surface area for ball joint retention with no supporting clips. If these cups distort, the ball joint fails and falls out.

GM 1500 trucks built after April 1, 2016 are stamped steel arms mated to smaller steel knuckles with the larger of the two ball joints. Basically, they are using the larger ball joint from the aluminum arm and putting it in a stamped arm and mating it to a smaller steel knuckle.

Vehicle fitment

  • 2019–2025 GMC Sierra 1500 AT4
  • 2019–2024 Chevrolet Silverado 1500 LT
  • 2019–2025 Chevrolet Silverado 1500 WT
  • 2019–2021 Chevrolet Silverado 1500 SSV
  • 2019–2024 GMC Sierra 1500 SLT
  • 2019–2024 GMC Sierra 1500 SLE
  • 2019–2024 Chevrolet Silverado 1500 RST
  • 2019–2024 Chevrolet Silverado 1500 LTZ
  • 2019–2024 Chevrolet Silverado 1500 LT Trail Boss
  • 2019–2024 Chevrolet Silverado 1500 High Country
  • 2019–2024 GMC Sierra 1500 Elevation
  • 2019–2024 GMC Sierra 1500 Denali
  • 2019–2024 Chevrolet Silverado 1500 Custom Trail Boss
  • 2019–2024 Chevrolet Silverado 1500 Custom
  • 2019–2021 GMC Sierra 1500
  • 2022–2024 GMC Sierra 1500 AT4X
  • 2022–2024 GMC Sierra 1500 Pro
  • 2022–2024 GMC Sierra 1500 Denali Ultimate
  • 2022–2024 Chevrolet Silverado 1500 ZR2
  • 2023–2024 Chevrolet Silverado 1500 PPV

Your vehicle

Select a vehicle to check the supplied application records for this part.

Choose or change vehicle →

Product reference & ordering help

Manufacturer & part identification

Baja Kits

Use the SKU for your selected option when contacting us.
OptionSKU / part reference
StandardBJK1111003
Vehicle compatibility

Read the application years, model, trim, engine and exclusions in the description above. A make-level collection or product recommendation alone does not confirm fitment.

Request fitment help →
Installation & specifications

Review the manufacturer’s specifications and installation notes above. Confirm required mounting hardware, tools and modifications before ordering. If instructions are not supplied, contact us with the part reference.

Shipping expectations

Processing and delivery vary by product, supplier and destination. Contact us to confirm timing for your part before planning an installation.

Shipping & delivery information
Manufacturer warranty

Coverage and exclusions vary by manufacturer and part. Review the supplied product documentation or ask us for the applicable terms.

Warranty information