Modular Cabinet Bed System for Sprinter & Transit

The Modular Cabinet Bed System for Sprinter & Transit is a complete bed and storage system, available in North/South and East/West orientations. The bed panels lift off without tools to open up the rear of the van and included cover panels drop onto the same pins to create a 60" wide x 16" deep countertop on each side (North/South extends to 73.43" long). Mounting hardware adjusts 1.5" to fit against bare walls or finished paneling. The base cabinets house water and a full electrical setup, with compartments sized for NW Conversions wheel-well water tanks (20-gallon for Sprinter, 24-gallon for Transit); the aluminum side panels can be cut to add outlets, switches, or control panels. Removable front cabinet panels give easy access to the storage inside, with an included bungee to hold it in place. With the bed panels on, there's 33" to 36" wide x 36" tall of open storage underneath. North/South beds measure 66" to 69" wide x 74" long; East/West beds are 60" wide x 66" to 69" long plus a flare cavity, with 49" wide x 5" deep flare extensions included. Built from 3mm aluminum with stainless steel hardware and a black interior powder coat finish. Optional custom-fit mattresses available, and the FVC Murphy Bed Ladder can be attached (drilling required). 

• Complete kit: base cabinets, bed panels, mounting hardware, cover panels, and flare extensions (East/West only)
• Bed panels remove without tools for full walk-thru access and storage
• North/South bed dimensions: 66" to 69" wide x 74" long
• East/West bed dimensions: 60" wide x 66" to 69" long plus flare cavity
• East/West flare extensions included: 49" wide x 5" deep
• Cover panels included for a flush 60" wide x 16" deep countertop on each side when the bed is not in use (North/South extends to 73.43" long)
• Leaves 33" to 36" wide x 36" tall of open storage space beneath the bed panels
• Built to house a complete electrical system
• Compact-grade laminate countertops with a refinishable top coat
• Adjustable mounting hardware with 1.5" of range for different wall setups
• All-aluminum 3mm construction with stainless steel hardware and black interior powder coat finish
• Bungee included
• Optional custom-fit mattresses available

Specifications

• Installation Level - 1 = Easy, 5 = Hard: 3
• Installation Time (hrs): 8 hrs
• Product Material: Aluminum
• Product Texture: Smooth
• Prop 65 Warning Required (Y/N): YES
• Prop 65 Warning Verbiage: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Vehicle application overview

Confirm trim, engine, and installation requirements before ordering.

• 2007–2016 Mercedes-Benz Sprinter
• 2009–2024 Mercedes-Benz Sprinter
• 2010–2026 Mercedes-Benz Sprinter 2500
• 2010–2026 Mercedes-Benz Sprinter 3500
• 2017–2024 Mercedes-Benz Sprinter
• 2018–2024 Mercedes-Benz Sprinter
• 2018–2026 Mercedes-Benz Sprinter 3500XD
• 2019–2023 Mercedes-Benz Sprinter 1500
• 2019–2024 Mercedes-Benz Sprinter
• 2019–2025 Mercedes-Benz Sprinter 3500XD
• 2019–2026 Mercedes-Benz Sprinter 2500