Fabtech K2186 4-Inch Lift - 2011-2013 F150 SVT Raptor 4WD 6.2L - Retains Factory Fox Shocks

Fabtech K2186 is a 4-inch suspension lift for a 2011-2013 Ford F150 SVT Raptor 4WD with the 6.2L gas engine. The system retains the factory SVT control arms and factory Fox shocks. No new shock absorbers are included.

Package contents

• One FTS22161 component box with driver/passenger front shock extension assemblies, four FT30533 aluminum shock bushings, driver/passenger FT30531BK and FT30532BK rear shock drop mounts, front and rear crossmembers, a skid plate, differential relocation brackets, sway-bar drop brackets and hardware.
• One FTS22162 component box with driver/passenger FTS30494D and FTS30494P steering knuckles, four FT737U U-bolts, two FTBK52 five-inch two-pin rear blocks, one FT295 alignment cam half kit, FT30525 hardware and the FT30526 hardware subassembly.
• The hardware subassembly includes brake-line relocation brackets, nut tabs, bushings and sleeves.
• The existing front and rear Fox shocks are reused with the supplied extensions and drop mounts. Factory SVT control arms are retained. Replacement Fox shocks and control arms are not included.

Application and installation

For the listed 2011-2013 F150 SVT Raptor 4WD 6.2L gas configuration. Raptor models only. OEM wheels and tires cannot be used. Requires wheels at least 18 inches in diameter and does not work with the factory skid plate. Do not combine with another lift device.

Manufacturer tire guidance: 355/65R18 or 37/12.50R18 tires on 18x9 wheels with 5-inch backspacing, with trimming. Additional bumper or valance trimming may be required. Check clearance on the actual vehicle.

Professional installation and alignment are required. Installation includes cutting the control-arm pockets and differential mounting provision, drilling the differential mount and rear shock brackets, pressing out the factory lower shock bushings, and servicing the integrated wheel-end vacuum system. The manufacturer specifies the lowest factory front coilover setting. Follow the exact manufacturer instructions for installation, brake/ABS/vacuum-line clearances, re-torque, inspections and maintenance.

Installed vehicle photos are illustrative; the vehicle, wheels, tires and other equipment shown are not included. Verify the listed application and package contents.

Manufacturer suspension instructions

WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.