Fabtech K4163M 3-inch Sport II Lift Kit with Stealth Monotube Shocks for 2020–2026 Jeep Gladiator JT 4WD Gas

Fabtech K4163M is a 3-inch Sport II suspension lift kit for the 2020–2026 Jeep Gladiator JT 4WD with the 3.6L V6 gasoline engine.

Application

• 2020–2026 Jeep Gladiator JT; 4WD; 3.6L V6 gasoline only.
• Does not fit diesel models. This listing covers the Gladiator JT application shown by the manufacturer.

Package contents

• One FTS24243 GAS suspension kit: four replacement coils (two front and two rear), four sway links and four bump-stop extensions.
• 2 × FTS6349 front Stealth shocks
• 2 × FTS6333 rear Stealth shocks
• Installation hardware supplied with the listed suspension and shock components.

Suspension configuration

The Sport II system includes dual-rate replacement coil springs at all four corners. Extended front and rear sway-bar links and bump-stop extensions complete this suspension configuration.

Installation and clearance

• Professional installation and the complete applicable manufacturer instructions are required.
• Installation includes drilling the front bump-stop coil perches to 1/2 inch, repositioning the front brake-line brackets and axle breather, and lowering the rear brake-line brackets with 9/32-inch drilling through the bracket mount and frame.
• Front and rear replacement coils use the factory upper coil isolators.
• Install the supplied front and rear Stealth shocks using the specified sleeves, spacers and mounting hardware.
• Check brake-hose, ABS-wire, steering and suspension clearances through full travel and steering lock. Align the front end, adjust headlights, and recheck fasteners after 50 miles and periodically thereafter.

Tire and wheel guidance

Manufacturer-listed combinations depend on fender configuration and require the stated trimming or cutting; verify clearance on the vehicle.

• Stock fenders: 35/12.50R17 on 17×9 wheels with 4.5-inch backspacing; minor trimming.
• Stock fenders: 35/12.50R18 or 325/65R18 on 18×9 wheels with 4.5-inch backspacing; minor trimming.
• Stock fenders: 35/12.50R20 or 325/60R20 on 20×9 wheels with 5-inch backspacing; minor trimming.
• High-clearance fenders: 37/12.50R17 on 17×9 or 37/12.50R18 on 18×9 wheels with 4.5-inch backspacing; cutting required.
• High-clearance fenders: 37/12.50R20 on 20×9 wheels with 5-inch backspacing; cutting required.

Vehicle demonstration photos are illustrative. The primary photo shows the listed kit components; wheels and tires are not included.

California Proposition 65 warning applies; review the manufacturer product information and instructions before purchase.

Manufacturer product details