6'' Lift Kit 2019-2023 Ram 2500 W/ Falcon Shocks And Ring And Crossmember Standard Output Diesel Motor

ReadyLIFT is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6" lift kit with Falcon 1.1 Monotube shocks for the 2019-2023 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37x12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look. The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT 6" lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.

• Designed for Ram Heavy Duty applications
• Proprietary front and rear coil springs
• Heavyduty radius arm drop brackets
• Heavyduty fabricated steel front and rear track bar brackets
• Forged dropped pitman arm
• Front/rear sway bar relocation brackets
• Bump stop extensions
• Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
• Premium kit includes Falcon 1.1 Monotube front & rear shocks
• Only available for 2500 HD Standard Output Motor and 68RFE Transmission
• Note: Single Cab configuration not validated for fitment & drivability by ReadyLIFT
• Heavy Heavyduty radius arm drop brackets
• Heavy Heavyduty fabricated steel front and rear track bar brackets
• Prevents over Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks

Specifications

• 17 Inch Wheel Max Backspacing: 4.8
• 18 Inch Wheel Max Backspacing: 4.8
• 20 Inch or Larger Wheel Max Backspacing: 4.8
• Average Installation Time: 120
• Average Installation Time: 1.5
• Bushing(s) Included: No
• California Proposition 65: WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
• Fitment: Direct Fitment
• Front Lift Component: Coil Spring
• Front Lift Height: 6 Inches
• Front Lift Height: 6
• Front or Rear: Front and Rear
• Front Shocks: Falcon 1.1 Monotube
• Install Difficulty: Difficult Requires Professional Installation
• Installation Time: 5+ Hours
• Lift Kit Category: Big Lift
• Max Tire Diameter Custom Fit: 37
• Max Tire Diameter Sure Fit: 35
• Max Tire Size: 37 Inch
• Maximum Lift: 6
• Mounting Hardware Included: Yes
• Prop65 Chem1: Di(2-ethylhexyl)phthalate (DEHP)
• Rear Lift Component: Coil Spring
• Rear Lift Height: 6
• Rear Lift Height: 4 Inches
• Rear Shocks: Falcon 1.1 Monotube
• Shock Brand: Falcoln
• Shocks Included: Yes

Vehicle application overview

Confirm trim, engine, and installation requirements before ordering.

• 2019 Ram 2500
• 2019–2020 Ram 2500
• 2019–2021 Ram 2500
• 2019–2023 Ram 2500
• 2019–2024 Ram 2500
• 2021–2024 Ram 2500