Factor 55 00352-01 The Splicer Synthetic Rope Splice-On Shackle Mount — Red

One Red Factor 55 The Splicer thimble-style shackle mount with an integrated EPDM rubber pad. It is spliced directly onto a compatible synthetic winch rope. Supplied color: Red.

• For synthetic winch rope only, up to 1/2 inch in diameter. Do not use steel cable.
• Requires synthetic rope splicing knowledge. Factor 55 recommends a locking Brummel or long bury splice; follow the rope manufacturer's construction, splice and installation requirements.
• The working load limit depends on the rope and its diameter, splice and rigging. This mount does not provide a fixed independent working load rating for every rope.
• Connects to the pin or bow end of common 3/4-inch screw-pin shackles, and the pin ends of 7/8-inch and 1-inch screw-pin shackles. Confirm actual connector dimensions and ratings.
• Machined aluminum rope passage helps protect the captured rope from impact, abrasion and UV exposure. The rubber pad cushions stowage against a compatible fairlead.
• Keep forces in line. Do not side load the shackle; follow the engraved warnings and inspect the rope, splice and hardware before use.

Includes one splice-on mount with rubber pad. Winch rope, shackles, winch, fairlead and vehicle are separate. Confirm rope construction, splice suitability, load ratings and clearances before installation. No specific vehicle year or trim fitment is verified.

The primary photo shows the supplied Red mount. The Yellow mount with rope is an illustrative splicing view; the rope is not included.

California Proposition 65: WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.